Abstract:China Fusion Engineering Test Reactor (CFETR) is a major scientific project independently designed and developed by China, which will demonstrate the engineering feasibility of continuous large-scale fusion energy for safe and stable power generation. One of the most critical issues for fusion reactors is to achieve tritium self-sufficiency with a tritium breeding ratio (TBR) of no less than 1.0, as it relates to the ability of the fusion reactor to fulfill the fuel cycle and continue stable operation. Moreover, the release and inventory of tritium is also a significant factor affecting the operation of CFETR. The temperature distribution inside the breeder blanket is precisely related to the tritium release. Therefore, it is particularly important for CFETR to optimize the temperature field inside the breeding blanket. It is significant that to ensure that the temperature of the mixed pebble bed zone reaches the limit of 900 °C as much as possible, which could maximize the tritium release efficiency. Simultaneously, it must make sure that other structural materials meet the allowable value of temperature. Tritium accumulation close to the cooling pipe is investigation, which will be adverse to tritium release. Hence, in order to solve this difficulty, the Be12 Ti tube was sleeved on the cooling pipe to increase the temperature of the mixed pebble bed zone near the cooling pipe. In this work, a water-cooled solid breeder blanket was proposed and the nuclear heat was calculated based on the 1.5 GW fusion power. The nuclear heat was used as the preprocessing data for thermal calculation carried out by the Monte Carlo N-Particle Transport Code (MCNP). With the given conditions, the thermal hydraulic was simulated with the commercial CFD code, the ANSYS CFX. In this way, a breeding blanket structure with a uniform temperature field of mixed bed zone close to 900 °C can be obtained. In addition, the selection of Be12 Ti tubes with the thickness of 0.525 cm can ensure a high TBR and increase the temperature around the cooling tubes to improve the tritium release efficiency. This work provides an important reference for the subsequent engineering design of CFETR breeding blanket.

Steady State and Transient Thermal Analysis of the Updated Helium-Cooled Solid Breeder Blanket for CFETR

Thermo-Hydraulic Analysis Of The Optimized Helium Cooled Solid Breeder Blanket For Cfetr

Numerical research on the neutronic/thermal-hydraulic/mechanical coupling characteristics of the optimized helium cooled solid breeder blanket for CFETR

Updated Neutronics Analyses of a Water Cooled Ceramic Breeder Blanket for the CFETR

Neutronics Analysis of Helium Cooled Ceramic Breeder Blanket with S-shaped Lithium Zone and Cooling Plate for CFETR

Thermo-mechanical Assessment of the Optimized CFETR Water Cooled Ceramic Breeder Blanket

Evaluation and Optimization of Tritium Breeding, Shielding and Nuclear Heating Performances of the Helium Cooled Solid Breeder Blanket for CFETR

Numerical Study on the Purge Gas Flow and Heat Transfer Characteristics in Helium Cooled Solid Breeder Blanket of CFETR

Neutronics and Thermo-Hydraulic Analysis of Water-Cooled Blanket Based on Pwr and Scwr Water Conditions for Cfetr

Impact Analysis of Helium Cooled Solid Blanket Structures on the Tritium Breeding Performance in CFETR

Thermal–Hydraulic Analysis for One Water-Cooled Blanket Module of CFETR Based on RELAP5

Thermal Hydraulic Analysis of the HECLIC Blanket Breeder Unit for CFETR

Preliminary Neutronics/Thermal-Hydraulics Design and Analyses of the Helium-Cooled Mixed Bed Breeder Blanket for Cfetr under 1.5 Gw Fusion Power

Conceptual Design of a Helium-Cooled Ceramic Breeder Blanket for CFETR

Thermo-mechanical Analysis on the Full Module of Water Cooled Ceramic Breeder Blanket for CFETR

Preliminary Neutronics Design and Analysis of the Bit Helium Cooling Ceramics Blanket for Cfetr

ICONE23-1841 THERMAL HYDRAULIC ANALYSIS OF WATER COOLED BREEDER BLANKET DESIGNED FOR CFETR

Thermal Analysis of Breeder Unit for Helium Cooled Solid Breeder Blanket of Chinese Fusion Engineering Test Reactor

Investigation and Analysis on Tritium Accumulation Phenomenon Based on a Water-Cooled Blanket for CFETR at 1.5 GW

Thermal Hydraulic Design and Analysis of A Water-Cooled Ceramic Breeder Blanket with Superheated Steam for Cfetr

Updated Design of Water-Cooled Breeder Blanket for CFETR