Abstract:Abstract Fabricating highly crystalline macroscopic films with extraordinary electrical and thermal conductivities from graphene sheets is essential for applications in electronics, telecommunications, and thermal management. High-temperature graphitization is the only way known to date for the crystallization of all types of carbon materials, where defects are gradually removed with increasing the temperature. However, when using graphene materials as precursors including graphene oxide, reduced graphene oxide and pristine graphene, even a long-term graphitization at 3000°C can only produce graphene films with small grain sizes and abundant structural disorders, which limit their conductivities. Here, we show that high-temperature defects substantially accelerate the grain growth and ordering of graphene films during graphitization, enabling ideal AB stacking as well as over 100, 64 and 28 times improvements in grain size, electrical and thermal conductivities, respectively, from 2000 to 3000°C. This process is realized by nitrogen doping, which retards the lattice restoration of defective graphene, retaining abundant defects such as vacancies, dislocations and grain boundaries in graphene films at high temperature. With this approach, a highly ordered crystalline graphene film similar as highly oriented pyrolytic graphite is fabricated, whose electrical and thermal conductivities (∼2.0 × 104 S cm−1; ∼1.7 × 103 W m−1 K−1) are improved by ∼6 and 2 times, respectively, compared to those of the graphene films fabricated by graphene oxide. Such graphene film also exhibits a superhigh electromagnetic interference shielding effectiveness of ∼90 dB at a thickness of 10 μm, outperforming all the synthetic materials of comparable thickness including MXene films. This work not only paves the way for the technological applications of highly conductive graphene films but also provides a general strategy to efficiently improve the synthesis and properties of other carbon materials such as graphene fibers, carbon nanotube fibers, carbon fibers, polymer-derived graphite, and highly oriented pyrolytic graphite.

Long-term Electrical Conductivity Stability of Graphene under Uncontrolled Ambient Conditions

Electrical and Mechanical Performance of Graphene Sheets Exposed to Oxidative Environments

Environmentally Stable Macroscopic Graphene Films with Specific Electrical Conductivity Exceeding Metals

Stability of Radio-Frequency Graphene Field-Effect Transistors in Ambient

Critical Crystal Growth of Graphene on Dielectric Substrates at Low Temperature for Electronic Devices.

Mechanical Properties of Locally Oxidized Graphene Electrodes

Solvent-Free Process to Produce Three Dimensional Graphene Network with High Electrochemical Stability

CVD graphene with high electrical conductivity: Empowering applications

Degradation of Graphene in High- and Low-Humidity Air, and Vacuum Conditions at 300–500 K

Oxidation Resistance of Graphene-Coated Cu and Cu/Ni Alloy

Graphene: Near‐Equilibrium Chemical Vapor Deposition of High‐Quality Single‐Crystal Graphene Directly on Various Dielectric Substrates (adv. Mater. 9/2014)

A Stably Enhanced Transparent Conductive Graphene Film Obtained Using an Air-Annealing Method

Long-Term Exposure of Graphene Oxide Suspension to Air Leading to Spontaneous Radical-Driven Degradation

Aging Effects on Vertical Graphene Nanosheets and their Thermal Stability

Enhanced room-temperature corrosion of copper in the presence of graphene.

Atomic and electronic structure of a copper/graphene interface as prepared and 1.5 years after

Defects boost graphitization for highly conductive graphene films

Low-temperature quantum transport in CVD-grown single crystal graphene

Flexible Full-Surface Conformal Encapsulation for Each Fiber in Graphene Glass Fiber Fabric against Thermal Oxidation

The Nanostructure Preservation of 3D Porous Graphene: New Insights into the Graphitization and Surface Chemistry of Non-Stacked Double-Layer Templated Graphene after High-Temperature Treatment

Preparation of Graphene/Si/C Composite Nanolayer Electrodes by Magnetron Sputtering and Study on Lithium Storage Properties