Abstract:LNG floating production storage and offloading (FPSO) unit is a new type of floating production unit developed for offshore natural gas fields. It performs the functions of natural gas extraction, pretreatment, liquefaction, and storage. In this study, the heat transfer characteristics of a spiral-wound heat exchanger were studied using numerical simulations, which provides a basis for equipment selection and structural optimization of spiral-wound heat exchangers. The main research contents and conclusions are as follows. Under land-based simulation conditions, the heat transfer coefficient of the shell side of the spiral-wound heat exchanger decreases with an increase in the winding angle of the heat exchange tube, decreases with an increase in the spacing of the heat exchange tube, and increases with an increase in the outer diameter of the heat exchange tube. When the winding angle increased from 5° to 8°, the heat transfer coefficient decreased by 6.70%. The heat transfer coefficient of the shell side decreased by 13.21% when the heat exchange tube spacing increased from 14 to 17 mm. The heat transfer coefficient of the shell side increased by 22.89% when the outer diameter of the heat exchange tube increased from 9 to 12 mm. When the sloshing angle is constant, the heat transfer coefficient of the spiral-wound heat exchanger decreases with an increase in the winding angle and spacing of the heat exchange tubes, and increases with an increase in the outer diameter of the heat exchange tubes. When the structural parameters of the heat exchanger are constant, the heat transfer coefficient decreases as the sloshing angle increases. When the sloshing angle was less than 3°, the sloshing promoted heat transfer on the shell side. When the sloshing angle was higher than 7°, the heat transfer effect of the shell side deteriorated considerably, which weakened the heat transfer performance of the heat exchanger. When the sloshing period is constant, the heat transfer coefficient of the wound heat exchanger decreases with an increase in the winding angle and spacing of the heat exchange tubes, and increases with an increase in the outer diameter of the heat exchange tubes. When the structural parameters of the heat exchanger are constant, the heat transfer coefficient increases with sloshing period. When the sloshing period was greater than 15 s, the influence of sloshing on the heat transfer on the shell side of the heat exchanger was relatively weak.

Numerical study on shell-side flow and heat transfer of spiral-wound heat exchanger under sloshing working conditions

Numerical Study on Hydrodynamics, Mixing and Heat Transfer of Highly Viscous Fluid in a Novel Shell-and-tube Heat Exchanger with X-type Baffles

Numerical Investigation on Hydrodynamics and Heat Transfer of Highly Viscous Fluid in Sulzer Mixer Reactor

Numerical Study on Shell-Side Saturated Boiling Heat Transfer in Spiral Wound Heat Exchanger

Numerical simulation of heat transfer performance of spiral wound heat exchanger under sloshing condition

Numerical Study on Thermo-Hydraulic Performance in the Shell Side of Spiral-Wound Heat Exchanger

Numerical Investigation on Shear Flow and Boiling Heat Transfer on Shell-Side of LNG Spiral Wound Heat Exchanger

Numerical study on the flow characteristic of shell-side film flow of floating LNG spiral wound heat exchanger

Numerical Study on the Shell-Side Flow and Heat Transfer of Superheated Vapor Flow in Spiral Wound Heat Exchanger under Rolling Working Conditions

Influence of Sloshing Conditions on the Pressure Drop and Heat Transfer of a Single-Layer Spiral-Wound LNG Heat Exchanger

Flow Field Simulation of the Spiral-Wound Heat Exchanger

Experimental and Numerical Investigation on Shell-side Performance of Multilayer Spiral-Wound Heat Exchangers

NUMERICAL STUDY OF FLOW AND HEAT TRANSFER CHARACTERISTICS IN SHELL-AND-PLATE HEAT EXCHANGERS

Experimental Research on Distribution Characteristics of Biphasic Fluids in the Shell Side of LNG Spiral-Wound Heat Exchangers under Sloshing Conditions

The Heat Transfer Characteristic of Shell-Side Film Flow in Spiral Wound Heat Exchanger under Rolling Working Conditions

Shell-side heat transfer characteristics of floating liquefied natural gas spiral wound heat exchanger under sloshing conditions

A numerical and experimental study of chevron, corrugated-plate heat exchangers

Experimental Study of the Effects of Key Geometry Parameters on Shell-Side Vapor Condensation of Spiral-Wound Heat Exchangers

Numerical Study of Heat Transfer Characteristic for Subcooled Falling Film outside the Shaped Tubes under Rolling Motion

Numerical Study of Heat Transfer Characteristics in Bog Heat Exchanger

Numerical Simulation and Experimental Study on Turbulent Flow in Shell Side of Shell-and-Tube Heat Exchangers