Numerical Study of Heat Transfer Characteristic for Subcooled Falling Film outside the Shaped Tubes under Rolling Motion

Hui Han,Junqi Wang,Shaowei Wang,Yuxing Li

DOI: https://doi.org/10.1007/s11630-023-1709-y

IF: 2.013

2023-04-20

Journal of Thermal Science

Abstract:The heat transfer performance of spiral wound heat exchanger used in the floating liquefied natural gas (FLNG) may be significantly affected by the sloshing conditions. In this paper, a three-dimensional numerical model combined with the dynamic mesh technology is conducted to study subcooled falling film heat transfer under static and sloshing conditions. The three-dimensional velocity distribution of the liquid film on the shell side is observed. The effects of cross-section shape of heat exchange tubes, Reynolds numbers and sloshing parameters on heat transfer characteristics are analyzed. The results indicate that the heat transfer performance of the egg-shaped tube is superior to that of the elliptical and circular tube under both static and sloshing conditions due to significant heat transfer improvement in the lower half of the tube. The heat transfer coefficients of three different kinds of tubes decrease under sloshing conditions. When the rolling amplitude is 6°, the average heat transfer coefficients of the circular tube, elliptical tube and egg-shaped tube are reduced by 2.1%, 3.7% and 4.9% respectively. Under the current sloshing parameters, increasing the rolling amplitude, the heat transfer coefficients of three different tubes are slightly increased, while the sloshing period has little effect on heat transfer. The egg-shaped tube and elliptical tube are greatly affected by sloshing motion at the low Reynolds number, while the effect is relatively small at the high Reynolds number.

engineering, mechanical,thermodynamics