Abstract:Manganese carbonate (MnCO3) is an attractive anode material with high capacity based on conversion reaction for lithium-ion batteries (LIBs), but its application is mainly hindered by poor cycling performance. Building nanostructures/porous structures and nanocomposites has been demonstrated as an effective strategy to buffer the volume changes and maintain the electrode integrity for long-term cycling. It is widely believed that microsized MnCO3 is not suitable for use as anode material for LIBs because of its poor conductivity and the absence of nanostructure. Herein, different from previous reports, spherical MnCO3 with the mean diameters of 6.9 μm (MnCO3-B), 4.0 μm (MnCO3-M), and 2.6 μm (MnCO3-S) were prepared via controllable precipitation and utilized as anode materials for LIBs. It is interesting that the as-prepared MnCO3 microspheres demonstrate both high capacity and excellent cycling performance comparable to their reported nanosized counterparts. MnCO3-B, MnCO3-M, and MnCO3-S deliver reversible specific capacities of 487.3, 573.9, and 656.8 mA h g(-1) after 100 cycles, respectively. All the MnCO3 microspheres show capacity retention more than 90% after the initial stage. The advantages of MnCO3 microspheres were investigated via constant-current charge/discharge, cyclic voltammetry and electrochemical impedance spectroscopy. The results indicate that there should be substantial structure transformation from microsized particle to self-stabilized nanostructured matrix for MnCO3 at the initial charge/discharge stage. The evolution of EIS during charge/discharge clearly indicates the formation and stabilization of the nanostructured matrix. The self-stabilized porous matrix maintains the electrode structure to deliver excellent cycling performance, and contributes extra capacity beyond conversion reaction.

Al2O3 Coated Mn3O4@C Composite for LIBs Anode with Enhanced Cycling Stability and Rate Performance

Boosting the high-rate performance of lithium-ion battery anodes using MnCo2O4/Co3O4 nanocomposite interfaces.

A simple synthesis of Li3Fe(MoO4)3@C composite anode materials with high initial Coulombic efficiency and high capacity stability for lithium ion batteries

Achieving CoAl 2 O 4 @Li 1.2 Ni 0.13 Co 0.13 Mn 0.54 O 2 with Long Cyclic and High-Rate Performance via Citric Acid Combustion Method

A facile preparation route of MnO@C composite for high lithium storage anode

High-Capacity and Self-Stabilized Manganese Carbonate Microspheres As Anode Material for Lithium-Ion Batteries.

Large-scale Synthesis of Lithium- and Manganese-Rich Materials with Uniform Thin-Film Al 2 O 3 Coating for Stable Cathode Cycling

Improving Electrochemical Cycling Stability of Ni‐rich LiNi 0.91 Co 0.06 Al 0.03 O 2 Cathode Materials through H 3 BO 3 and Y 2 O 3 Composite Coating

In situ formed Li5AlO4-coated LiNi0·8Co0·1Mn0·1O2 cathode material assisted by hydrocarbonate with improved electrochemical performance for lithium-ion batteries

Nanocrystalline Cellulose Supported MnO2 Composite Materials for High-Performance Lithium-Ion Batteries

Manganous Oxide-Cobalt@carbon Microcubes with a Hierarchical Mesoporous Structure for High Performance Lithium Storage

Ionic Liquid Derived Co3O4/Nitrogen Doped Carbon Composite As Anode of Lithium Ion Batteries with Enhanced Rate Performance and Cycle Stability

Nitrogen-Enriched Porous Carbon Coating for Manganese Oxide Nanostructures Toward High-Performance Lithium-Ion Batteries.

MoC@Cu@C Composites with Structural Advantages Exhibit Excellent Electrochemical Performance and Stability in LIBs

Improving Electrochemical Cycling Stability of Ni‐rich LiNi0.91Co0.06Al0.03O2 Cathode Materials Through H3BO3 and Y2O3 Composite Coating

A Co3O4/C Composite for Use As a High-Performance Lithium-Ion Battery Anode

Facile Preparation of Interlocked Fe 2 O 3 /MOF Composite for Boosted Rate and Cycle Performance of Lithium-Ion Batteries

Facile Preparation of Interlocked Fe2O3/MOF Composite for Boosted Rate and Cycle Performance of Lithium-Ion Batteries

Nitrogen-doped carbon and high-content alumina containing bi-active cobalt oxides for efficient storage of lithium

MOF-derived MnO/C composites as high-performance lithium-ion battery anodes

Advancing Lithium-Ion Batteries' Electrochemical Performance: Ultrathin Alumina Coating on Li(Ni0.8Co0.1Mn0.1)O2 Cathode Materials