Abstract:The vortex-induced vibration (VIV) performance and aerodynamic mechanism of VIV control of a split three-box girder bridge were investigated numerically by Computational Fluid Dynamics (CFD). Large-scale section model wind tunnel tests show that the integrated countermeasure combined by 30% ventilation ratio grids and new scheme for maintenance tracks can effectively restrain vertical and torsional VIVs. The reliability of numerical method is verified by comparing static three-component coefficients and Strouhal numbers obtained from CFD and wind tunnel tests. The flow structure and changes of aerodynamic forces were analyzed via delayed detached-eddy simulation (DDES). For the original section, large-scale vortices form with shedding behind the safety barrier of the upstream box and behind the maintenance tracks, as well above the downstream highway box, introducing periodic pulsating lifts and moments that result in severe VIVs. The grids can effectively reduce the size of vortices in the gaps, prevent the flow from fluctuating and reduce the pressure difference between upper and lower surfaces. The torsional VIVs at non-negative attack angles are not controlled because the grids cannot interfere with the vortices behind the maintenance tracks. The new scheme for maintenance tracks, which has grid-like effects, can eliminate the torsional VIVs at non-negative attack angles by preventing the vortices behind maintenance tracks from impacting downstream boxes. The aerodynamic force components are analyzed to find that box 1 mainly contributes the mean values and box 3 mainly contributes the fluctuating values. The integrated countermeasure can reduce the mean and RMS values of aerodynamic forces to varying degrees. The streamlines and RMS pressure contours indicate that the integrated countermeasure effectively reduced the wake height and vortices motion range, which is conducive to VIV control. This work lays a solid foundation for an in-depth understanding of the aerodynamic characteristics and optimization mechanism of split three-box girder bridges.

Experimental study on mitigating vortex-induced vibration of a bridge by using passive vortex generators

Wake control using spanwise-varying vortex generators on bridge decks: A computational study

Experimental study on suppressing vortex-induced vibration of a long-span bridge by installing the wavy railings

Control of Vortex-Induced Vibration of a Long-Span Bridge by Inclined Railings

Vortex-induced vibration control of a streamline box girder using the wake perturbation of horizontal axis micro-wind turbines

External suction-blowing method for controlling vortex-induced vibration of a bridge

Vortex-induced Vibration and Control of Split Three-Box Girder Bridges

Optimizing vortex-induced vibration suppression in π-shaped girders using wind tunnel testing and CFD analysis

Experimental Investigation on Suppressing Circular Cylinder VIV by a Flow Control Method Based on Passive Vortex Generators

Vortex Dynamics-Based Flow Control of Wind Effects on Long-Span Bridges

Self-issuing Jet Control for Suppression of Vortex-Induced Vibrations of a Single Box Girder at Low Sc

Secondary wake instability of a bridge model and its application in wake control

Study on VIV performance of streamlined steel box girder of a sea-crossing cable-stayed bridge

Experimental and numerical studies of the vortex-induced vibration behavior of an asymmetrical composite beam bridge

The Vortex-Induced Vibrations of a Triple-Box Girder Model of a Long-Span Rail-Cum-road Bridge

Vortex-induced vibration performance and mechanism of long-span railway bridge streamlined box girder

A fast on-site measure-analyze-suppress response to control vortex-induced-vibration of a long-span bridge

Experimental and numerical study on vortex-induced vibration of a truss girder with two decks

Parameters Optimization and Performance Evaluation of Multiple Tuned Mass Dampers to Mitigate the Vortex-Induced Vibration of a Long-Span Bridge

Mitigation Measures of Vortex-Induced Vibration of Suspension Bridge Based on Section Model Test

Study on the Influence of Wind Fairing Parameters on the Aerodynamic Performance of Long-Span Double-Deck Steel Truss Suspension Bridge