Abstract:This study systematically investigates the influence of the cross-sectional aspect ratio (B/H) and four different aerodynamic mitigation measures, i.e., the fairing, lower central stability plate, inverted L-shaped edge plate, and lower horizontal edge plate, on the performance of cable-stayed bridges, with π-typed composite deck, i.e., π section, due to vortex-induced vibrations (VIV). The study utilized wind tunnel tests and limited CFD simulations by varying bridge dimensions. First, based on a survey of existing cable-stayed bridges with the π-typed composite deck, three-section models with different aspect ratios were studied and their corresponding vibration characteristics for the vertical and torsional VIVs were analyzed. Then, the vibration suppression effects of mitigation measures with several variants in shape were investigated to determine an effective mitigation measure, i.e., with favorable aerodynamic stability, for the π section deck. The vibration suppression mechanism for three selected cases was further assessed using numerical simulation. The results show that: (a) for the π section model with the aspect ratio in the range of 9.05–11.96, increasing the ratio value will delay the onset wind speed of the vertical and torsional VIVs; (b) In the case of a low ratio of the torsional frequency to vertical bending frequency, there are often special phenomena where the vertical and torsional vibrations coexist. However, a larger aspect ratio would result in more independent vertical and torsional vibrations; (c) Regarding the vibration suppression effect, based on the limited studied cases, a small fairing can be superior to large fairings; (d) Different forms of the lower central stability plate have a good suppression effect on the vertical VIV; (e) The use of inverted L-shaped edge plate with a = <math>23</math>H and b = <math>12</math>H is identified to result in the best vibration suppression for both the vertical and torsional vibrations among the considered mitigation measures, where a and b are the size parameters of the inverted L-shaped edge plate; and (f) The lower horizontal edge plate cannot effectively improve the torsional VIV performance. This study offers guidance on the performance of composite cable-stayed bridge with the π section in isolation and equipped with mitigation measures to aid in the engineering design practice.

Spanwise layout optimization of aerodynamic countermeasures for multi-mode vortex-induced vibration control on long-span bridges

Vortex-induced Vibration and Control of Split Three-Box Girder Bridges

Optimizing vortex-induced vibration suppression in π-shaped girders using wind tunnel testing and CFD analysis

Study on VIV performance of streamlined steel box girder of a sea-crossing cable-stayed bridge

Evaluation and Early Warning of Vortex-Induced Vibration of Existed Long-Span Suspension Bridge Using Multisource Monitoring Data

Aerodynamic performance of Π-shaped composite deck cable-stayed bridges including VIV mitigation measures

Modelling of vortex-induced force and prediction of vortex-induced vibration of a bridge deck using method of multiple scales

Experimental and numerical studies of the vortex-induced vibration behavior of an asymmetrical composite beam bridge

Optimization of cable-stayed bridges with three-dimensional modelling

Robust damping improvement against the vortex-induced vibration in flexible bridges using multiple tuned mass damper inerters

Dynamic Analysis and Optimization of Vehicle-Bridge Interaction System under Road Roughness and Time Variability of Element Interpolation Function

Study on the Influence of Wind Fairing Parameters on the Aerodynamic Performance of Long-Span Double-Deck Steel Truss Suspension Bridge

A fast on-site measure-analyze-suppress response to control vortex-induced-vibration of a long-span bridge

Study on optimization algorithm of tuned mass damper parameters to reduce vehicle-bridge coupled vibration

Discovering time-varying aeroelastic models of a long-span suspension bridge from field measurements by sparse identification of nonlinear dynamical systems

Vortex-induced vibration performance and mechanism of long-span railway bridge streamlined box girder

Mitigation Measures of Vortex-Induced Vibration of Suspension Bridge Based on Section Model Test

A generalized van der Pol nonlinear model of vortex-induced vibrations of bridge decks with multistability

Experimental Study of Mitigation of Wind-Induced Vibration in Asymmetric Cable-Stayed Bridge Using Sharp Wind Fairings

Optimization Method for Solving the Reasonable Arch Axis of Long-Span CFST Arch Bridges

Extraction of aerodynamic damping and prediction of vortex-induced vibration of bridge deck using CFD simulation of forced vibration