Abstract:In order to improve performance of internal combustion engines and meet the requirements of the new pollutant emission regulations, advanced combustion strategies have been investigated. The newly designed partially premixed combustion concept has demonstrated its potential for reducing NOx and particulate matter emissions combined with high indicated efficiencies while still retaining proper control over combustion process by using different injection strategies. In this study, parametric variations of injection pressure, second injection and third injection timings were experimentally performed to analyze the effect of the injection strategy over the air/fuel mixture process and its consequent impact on gaseous compound emissions and particulate matter emissions including its size distribution. Tests were carried out on a newly designed two-stroke high-speed direct injection compression-ignition engine operating with the partially premixed combustion concept using 95 research octane number gasoline fuel. A scanning particle sizer was used to measure the particles size distribution and the HORIBA 7100DEGR gas analyzer system to determine gaseous emissions. Three different steady-state operation modes in terms of indicated mean effective pressure and engine speed were investigated: 3.5 bar indicated mean effective pressure and 2000 r/min, 5.5 bar indicated mean effective pressure and 2000 r/min, and 5.5 bar indicated mean effective pressure and 2500 r/min. The experimental results confirm how the use of an adequate injection strategy is indispensable to obtain low exhaust emissions values and a balance between the different pollutants. With the increase in the injection pressure and delay in the second injection, it was possible to obtain a trade-off between NOx and particulate matter emission reduction, while there was an increase in hydrocarbon and carbon monoxide emissions under these conditions. In addition, the experiments showed an increase in particle number emissions and a progressive shift in the particles size distribution toward larger sizes, increasing the accumulation-mode particles and reducing the nucleation-mode particles with the decrease in the injection pressure and delay in the third injection.

Effects of Pilot Injection Strategy on Combustion and Emission Characteristics in Gasoline Compression Ignition

Effects and mechanism of pilot diesel injection strategies on combustion and emissions of natural gas engine

Numerical Investigation of the Effect of Injection Timing on the In-Cylinder Activity of a Gasoline Direct Injection Engine

Numerical Investigations of Injection Timing Effects on a GDI Engine Performance: Part B, In-Cylinder Emission Formation and Oxidation Process

Combined Effects of Pilot Quantity, Injection Pressure and Dwell Periods on the Combustion and Emissions Behaviour of a Modern V6 Diesel Engine

Effects of different injection strategies on mixing, combustion and emission behavior of gasoline compression ignition (GCI) engines

Effect of piston bowl geometry and compression ratio on in-cylinder combustion and engine performance in a gasoline direct-injection compression ignition engine under different injection conditions

Effects of multiple injection strategies on gaseous emissions and particle size distribution in a two-stroke compression-ignition engine operating with the gasoline partially premixed combustion concept

Effect of Cetane-Coupled Pilot Injection Parameters on Diesel Engine Combustion and Emissions

Experimental study on effects of pilot injection strategy on combustion and emission characteristics of diesel/methanol dual-fuel engine under low load

Effect of Pilot Injection Strategy on Performance of Diesel Engine under Ethanol/F-T Diesel Dual-Fuel Combustion Mode

Effects of Pilot Injection Timing and Egr on A Modern V6 Common Rail Direct Injection Diesel Engine

Effects of Injection Parameters on the Combustion and Emission Characteristics of Diesel-Piloted Direct-Injection Natural Gas Engine during Idle Conditions

Effect of multi-injection strategy on characteristics of methanol-fueled direct injection spark ignition engine

Effect of Injection Strategy on Emission Characteristics of Compression Ignition Engine Fueled with Blended Fuel

Investigation of Two-Stage Split-Injection Strategies for a Dieseline Fuelled PPCI Engine

Impact of Pilot Injection on Combustion and Emission Characteristics of a Low-Speed Two-Stroke Marine Diesel Engine

Experimental investigation on the combustion and emissions in a pilot ignited direct injection natural gas engine using HCDI strategy

The effect of diesel pilot injection strategy on combustion and emission characteristic of diesel/methanol dual fuel engine

Non-Volatile Particle Characteristics of A Light-Duty Diesel Engine with Pilot Injections and Exhaust Gas Recirculation

Experimental Investigation on Performance and Heat Release Analysis of a Pilot Ignited Direct Injection Natural Gas Engine