Abstract:In recent years, montmorillonite (Mt) has started to be used as a carrier for catalysts and widely utilized inexpensive adsorbent due to its unique structure. However, the used Mt might cause solid-waste pollution without proper dispose. In order to realize the resource utilization of solid waste, a new strategy for preparing high-performance catalysts was proposed using waste Mt-based materials as precursor, providing a new way to reuse abandoned Mt materials. In this study, the waste Mt was obtained by using iron hydroxide oxide (FeOOH) and hexadecylpyridinium chloride (CPC) to simulate the process of adsorption of contaminants (tetracycline, TC) on the montmorillonite composite. The iron oxide/Carbon-Montmorillonite (Fe/C-Mt) composite catalysts were successfully prepared at 700 °C pyrolysis temperature, reconstructing metal and carbon catalytic sites on Mt through the conversion of FeOOH to Fe3O4 and the organic precursors to graphite carbon. According to the investigation of catalytic performances, the sample after pyrolysis of montmorillonite modified by FeOOH, CPC and TC (Fe/CPC/TC-Mt-p) was determined as the optimum catalyst to activate peroxymonosulfate (PMS), and reaching the degradation efficiency of 96.2% in this oxidation system to treat target pollutants (ofloxacin, OFL). The increase of catalyst dosage and PMS concentration promoted the degradation effect of OFL, while initial pH and anionic species in the solution had little effect. Meanwhile, the synergistic effect of metal and carbon catalytic sites enables this system to have high oxidation activity. Here, Fe/CPC/TC-Mt-p/PMS system was developed with accelerating the generation of 1O2, making 1O2 the major reactive oxygen species for OFL degradation. In addition, Fe/CPC/TC-Mt-p catalyst has good stability, and could reach the initial degradation level of OFL after being regenerated by high temperature pyrolysis. This study provides a novel routine to applications of waste mineral materials and improving treatment efficiency of antibiotic wastewater through PMS activation.

Removal of Atorvastatin in Water Mediated by CuFe2O4 Activated Peroxymonosulfate

Photolysis of Atorvastatin in Aquatic Environment: Influencing Factors, Products, and Pathways.

Preparation of Fe/C-Mt composite catalyst and ofloxacin removal by peroxymonosulfate activation

Activation of Peroxymonosulfate by CoS2 Loaded Air-Laid Cloth for Rapid Degradation of Organic Pollutants in a Shallow Continuous Flow Reactor

FeCo 2 O 4 @CNT/PVDF catalytic spheres as peroxymonosulfate activator for levofloxacin decontamination: Catalytic mechanism, ecotoxicity evolution and degradation pathways

Catalytic degradation of micropollutant by peroxymonosulfate activation through Fe(III)/Fe(II) cycle confined in the nanoscale interlayer of Fe(III)-saturated montmorillonite

Synergistic mechanism and degradation kinetics for atenolol elimination via integrated UV/ozone/peroxymonosulfate process

Activation of peroxymonosulfate by CuCo<sub>2</sub>O<sub>4</sub> nano-particles towards long-lasting removal of atrazine

Efficient Degradation of Ofloxacin by Magnetic CuFe2O4 Coupled PMS System: Optimization, Degradation Pathways and Toxicity Evaluation

Analysis of atorvastatin in environmental waters: Validation of an electrochemical molecularly imprinted polymer sensor with application of life cycle assessment

Activating peroxymonosulfate with Fe-doped biochar for efficient removal of tetracycline: Dual action of reactive oxygen species and electron transfer

Effective removal of antibiotics from water by Cu2O/Co3O4-catalyzed peroxymonosulfate oxidation: catalytic performance and degradation mechanism

Applying a novel advanced oxidation process of activated peracetic acid by CoFe2O4 to efficiently degrade sulfamethoxazole

A New Insight into the Mechanism in Fe3O4@CuO/PMS System with Low Oxidant Dosage

Oxidative Degradation of Atenolol by Heat-Activated Persulfate: Kinetics, Degradation Pathways and Distribution of Transformation Intermediates.

Activation of peroxymonosulfate by a stable Co-Mg-Al LDO heterogeneous catalyst for the efficient degradation of ofloxacin

Copper oxide combing with multi-walled carbon nanotubes activated peroxyacetic acid for the degradation of sulfamethoxazole

Efficient degradation of tetracycline hydrochloride by activated peroxymonosulfate with PdO/CuFe 2 O 4 /coal-bearing strata kaolinite composite

Surface Fe(III)/Fe(II) Cycle Promoted the Degradation of Atrazine by Peroxymonosulfate Activation in the Presence of Hydroxylamine

Fe–Mn bimetallic catalyst to activate peroxymonosulfate (PMS) for efficient degradation of tetracycline: Mechanism insights and application for pharmaceutical wastewater

Removal of gatifloxacin by activated peroxymonosulfate using co-pyrolysis materials of water treatment residuals and biomass: Nonradical-dominated mechanisms enhanced by adsorption