Ionic Liquids-Coordinated Au Catalysts for Acetylene Hydrochlorination: DFT Approach Towards Reaction Mechanism and Adsorption Energy

Hao Xu,Shijun Meng,Guohua Luo

DOI: https://doi.org/10.1039/c7cy02539d

IF: 6.177

2018-01-01

Catalysis Science & Technology

Abstract:A DFT study of Au–IL catalysts for acetylene hydrochlorination was carried out and consistency with experimental data was obtained.

What problem does this paper attempt to address?

Efficient Au-0/C Catalyst Synthesized by A New Method for Acetylene Hydrochlorination

Xiaohui Tian,Guotai Hong,BinBo Jiang,Feipeng Lu,Zuwei Liao,Jingdai Wang,Yongrong Yang

DOI: https://doi.org/10.1039/c5ra06552f

IF: 4.036

2015-01-01

RSC Advances

Abstract:A Au0/C catalyst for acetylene hydrochlorination was prepared via a novel method and an excellent Au dispersion and catalytic activity was obtained.
On the Origin of Room–temperature, Au+‐mediated Coupling of a Methylene Ligand with H2. Implications for the Mechanism of Methane Dehydrogenation.

Jilai Li,Shaodong Zhou,Maria Schlangen,Thomas Weiske,Helmut Schwarz

DOI: https://doi.org/10.1002/slct.201600073

2016-01-01

ChemistrySelect

Abstract:According to state-of-the-art computations, in conjunction with mass-spectrometric experiments, both the Au+-mediated, thermal coupling of a methylene ligand with molecular hydrogen as well as the activation of methane by atomic Au+ proceed through well-defined intermediates. The crucial transition state in the [Au(CH2)](+)/H-2 reversible arrow [Au( CH4)](+) conversion is, in many ways, reminiscent of the isolobal, thoroughly studied [CH3](+)/ H-2 reversible arrow [CH5](+) system. The previously suggested direct mechanism, according to which the Lewis acidity of Au+ alone accounts for the unusual behavior of the Au+/CH4 couple, has been modified.
Improvement of performance of a Au–Cu/AC catalyst using thiol for acetylene hydrochlorination reaction

guotai hong,xiaohui tian,binbo jiang,zuwei liao,jingdai wang,yongrong yang,jie zheng

DOI: https://doi.org/10.1039/c5ra24584b

IF: 4.036

2016-01-01

RSC Advances

Abstract:In order to overcome problems of Au-Cu bimetallic catalysts for acetylene hydrochlorination reaction such as instability, Au-Cu-SH/AC catalysts were prepared through the introduction of thiol and tested to examine their activity and stability. It was found that performances of Au-Cu-SH/AC catalysts were quite excellent, with significantly higher catalytic activity and better stability than performances of Au/AC and Au-Cu/AC catalysts. The contents of Cu and thiol additives were also optimized and the optimum molar ratio of Au/Cu/SH was 1 : 1 : 10. Catalyst samples were characterized by scanning electron microscopy (SEM), nitrogen adsorption/desorption (BET), X-ray diffraction (XRD), transmission electronic microscopy (TEM), H-2 temperature-programmed reduction (H-2-TPR), and X-ray photoelectron spectroscopy (XPS). It was demonstrated that the Au-Cu-SH/AC catalysts were Au-0-based catalysts, due to thiol reducing Au3+ to Au-0 species during the preparation process. Au-0 species exhibited better catalytic activity than Au3+ species for acetylene hydrochlorination, according to the comparison with the composition of active species in different samples through XPS. Furthermore, the sulfhydryl of thiol could bond to the surface of gold nanoparticles (Au NPs). It helped in mitigating the oxidation of Au-0 by HCl, protecting Au NPs from structure damage, stabilizing Au NPs in a nearly constant particle size and keeping a more active structure in the reaction environment. Thus, improved dispersity of active species and protection of the active structure of the Au NPs resulted in the better catalytic activity and stability of Au-Cu-SH/AC.
Catalytic Behavior of Au Confined in Ionic Liquid Film: A Kinetics Study for the Hydrochlorination of Acetylene

Bolin Wang,Haifeng Zhang,Yuxue Yue,Changlin Li,Jia Zhao

DOI: https://doi.org/10.3390/catal12091012

IF: 3.9

2022-09-08

Catalysts

Abstract:A systematic study of the kinetics of supported-ionic-liquid-phase (SILP) Au catalysis (Au-IL/AC) has been established in the continuous gas-phase hydrochlorination of acetylene. We reveal that the effect of ionic liquid (IL) film on substrate diffusion can be eliminated. The reaction order of the catalyst indicates that Au is confirmed to exist as a monomer in the IL film of the Au-IL/AC system, which is different from the fast equilibrium of the "Au dimer and monomer" for the classical Au/AC catalyst. The homogeneous reaction micro-environment is confirmed for Au-IL/AC since the activation energy was little changed under both heterogeneous and homogeneous catalysis, further verifying the monatomic characteristics of Au in Au-IL/AC. Due to the supported IL film, the reaction order of hydrogen chloride was decreased from 1 to 0.5 while creating a hydrogen chloride enrichment system around Au, which provides the possibility of producing vinyl chloride with an equal substrates feed ratio. This kinetic-perspective-based revelation of the catalytic behavior of the metal active sites confined in IL film enriches and expands the SILP catalytic system for acetylene hydrochlorination.

chemistry, physical
Density Functional Theory Study of a Graphdiyne-Supported Single Au Atom Catalyst for Highly Efficient Acetylene Hydrochlorination

Sajjad Ali,Zan Lian,Bo Li

DOI: https://doi.org/10.1021/acsanm.1c00945

IF: 6.14

2021-05-26

ACS Applied Nano Materials

Abstract:In this work, supported single Au on graphdiyne is examined as an efficient catalyst for acetylene hydrochlorination. The adsorption of reactants C2H2 and HCl has a paramount influence on the reaction mechanism. It is indicated that C2H2 adsorption is much stronger than the counterpart of HCl for most of the investigated cases. An Eley–Rideal (E–R) mechanism is first investigated, which is initiated with C2H2 adsorption. In the following steps, the adsorbed C2H2 becomes the site to bind and activate HCl, which leads to formation of the product. It is also revealed that single Au experienced a redox cycle along the reaction pathway. The largest barrier is calculated to be 0.57 eV, corresponding to the product desorption. On the other hand, a novel Langmuir–Hinshelwood (L–H)-like mechanism is also reported, which started with coadsorption of HCl and C2H2. It is noted that the barriers of the LH mechanism are smaller than those of the ER mechanism. Moreover, supported single Au on graphdiyne has much improved performance than the counterpart on pristine graphene and single-walled carbon nanotube support. This work clearly demonstrated the superior performance of supported single Au in acetylene hydrochlorination and the potential of novel support graphdiyne in single-atom catalysis.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.1c00945?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.1c00945</a>.Optimized structures of adsorbed Au on GD; charge density difference plot of Au2GD; HCl adsorption energy; corresponding structures; distance between Au and carbon in C2H2; calculated binding energy and bond distance between Au and Cl of absorbed HCl on AunGD (n = 1–8); charge density difference plot of HCl/AuGD; reaction pathways of acetylene hydrochlorination on the surface of Au adsorbed on site 1 and sites 3–8 of GD; comparison of the energy barriers for acetylene hydrochlorination in the rate-limiting step obtained with different catalysts (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.1c00945/suppl_file/an1c00945_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Understanding the Role of Au in the Selective Hydrogenation of Acetylene on Trimetallic PdAgAu Catalytic Surface

Chenxi Yang,Guoqing Wang,Aimin Liang,Yi Yue,Hui Peng,Daojian Cheng

DOI: https://doi.org/10.1016/j.catcom.2019.01.012

IF: 3.51

2019-01-01

Catalysis Communications

Abstract:In this work, we used density functional theory calculations to comprehensively study the influence of Au on adsorption property, electronic structure and catalytic performance of trimetallic PdAgAu/Pd(111) surface. The results indicated that Au can not only isolate the contiguous Pd atoms, but also bind with acetylene. Furthermore, due to the high electronegativity of Au, the interaction between the surface and ethylene is weakened. Thus, through the geometric and electronic effects, Au addition endows the surface with strong and weak bonding to acetylene and ethylene, respectively, and also enhanced reactivity and selectivity in acetylene selective hydrogenation reaction.
Step Site-Specific Semihydrogenation of Acetylene on the Au Surface

Zongfang Wu,Fang Wang,Guanghui Sun,Feng Xiong,Botao Teng,Weixin Huang

DOI: https://doi.org/10.1021/acs.jpclett.2c01810

2022-01-01

Abstract:Supported Au catalysts are highly selective and size-sensitive in catalytic hydrogenation of alkynes under mild conditions. Using thermal-programmed desorption and density functional theory calculations, we study the hydrogenation reactions of C2 hydrocarbons with atomic H and clarify the site-specific selective hydrogenation of C2H2 on Au(997) at low temperatures. On atomic H(a) covered Au(997), hydrogenation of C2H2 goes with 100% selectivity to C2H4 at steps, yet no hydrogenation occurs at terraces; adsorbed C2H4 on neither steps nor terraces reacts with H(a). DFT calculations suggest that the increased adsorption free energies and appropriate reaction barriers of C2 species at steps lead to the step-site specific semihydrogenation of C2H2. These results elucidate the elementary surface reactions between C2 hydrocarbons and atomic H on Au surfaces at the molecular level and significantly deepen the fundamental understanding of the unique selectivity of Au catalysts.
Supported ionic liquid-copper catalyst for synergistically catalytic and highly efficient hydration of acetylene

Qiang Zhang,Xiejie Chen,Yu Xie,Xinyue Ji,Qihong An,Cunhua Ma,Caixia Xu

DOI: https://doi.org/10.1016/j.ijhydene.2021.12.163

IF: 7.2

2022-02-01

International Journal of Hydrogen Energy

Abstract:At present, heterogeneous mercury-free catalysts are suffering from rapid deactivation caused by reduction or aggregation/growth of copper particle during preparation and reaction. Here, a high-performance and long-lived catalysts with activated carbon supported copper-ionic liquid system (Cu-xIL/AC, x is the molar ratio of IL and Cu) was prepared by wet impregnation method for the hydration of acetylene to acetaldehyde. Over the optimal Cu-1.5IL/AC catalyst, the acetylene conversion of 96.8% and acetaldehyde selectivity of 87.1% could still be obtained at 20 h (T = 240 °C, GHSVC2H2 = 90 h−1 and VH2O/VC2H2 = 1.15). The experimental results indicated that Cu species were embedded in ionic liquid (IL) and the interaction and synergistic effect between metal ions and IL guaranteed high and stable dispersion of active species on the host and suppress the reduction of active Cu specie, which are mainly responsible for the excellent catalytic property. The findings highlight the contribution of ILs in heterogeneous catalytic reaction and supply a promising industrial application of Cu-1.5IL/AC catalyst in acetylene hydration.

energy & fuels,electrochemistry,chemistry, physical
Mechanistic Insight into Acetylene Hydrochlorination with Ru-Ligands via Dual Activation Promoted by Metal-Ligands Cooperative Catalysis

Saisai Wang,Liqi Wan,Chunxiao Jin,Tao Wang,Kaixuan Zhuge,Yuxue Yue,Haiting Cai,Bolin Wang,Renqin Chang,Jia Zhao,Xiaonian Li

DOI: https://doi.org/10.1016/j.apcata.2023.119382

2023-08-20

Abstract:Ru-based catalysts have shown great potential for the environmentally friendly industrialization of acetylene hydrochlorination. However, the high cost and reduction of active sites in Ru catalysts have limited their practical applications. In this study, we propose a strategy to optimize the electronic structure of Ru single-atom catalysts by leveraging the strong coordination ability of ligands with the metal and apply this strategy to acetylene hydrochlorination. The experimental results verify that the performance of the catalyst increases with the increase of the ligand. Characterization results indicate that ligands not only optimize the electronic properties of Ru single atoms by forming a RuCl 2 -N structure, but also enhance the adsorption of reactants on the catalysts. DFT calculations reveal that the ligand-modified Ru species can efficiently adsorb and activate acetylene molecules, while the adjacent excessive ligand can adsorb and dissociate HCl molecules. This ultimately leads to an addition reaction between acetylene and HCl through a hydrogen overflow mechanism.

chemistry, physical,environmental sciences
Highly Selectivity Catalytic Hydrogenation of Acetylene on Al2O3 Supported Palladium-Imidazolium Based Ionic Liquid Phase

Yiqi Xu,Yishu Jiang,Hao Xu,Qingtao Wang,Weimin Huang,Haihua He,Yuanyuan Zhai,Shuxia Di,Lingling Guo,Xiaoliang Xu,Jia Zhao,Feng,Qunfeng Zhang,Xiaonian Li

DOI: https://doi.org/10.1016/j.apcata.2018.09.002

IF: 5.723

2018-01-01

Applied Catalysis A General

Abstract:Designing the electron-rich palladium active site is of great importance to enhance the selectivity of ethylene in acetylene semi-hydrogenation. In this work, ionic liquids, the effective electronic modifier, were mingled with palladium solution to be immobilized on Al2O3 by incipient impregnation method. X-ray photoelectron spectra characterization was conducted to characterize the structure of catalysts, suggesting that some ionic liquids can form unique carbene structure. The catalytic results showed that those immobilized ionic liquids that can form unique carbene structure exhibited much higher selectivity of ethylene than those cannot. The above results were obtained because carbene can donor the electron to palladium, enriching the electron density of palladium and therefore facilitating the desorption of ethylene. The findings of the unique carbene structure derived from ionic liquids in this work provide an efficient strategy to design the catalyst to improve the selectivity of the intermediate in other partial hydrogenationreactions.
The Catalytic Mechanism of [Bmim]Cl-Transition Metal Catalysts for Hydrochlorination of Acetylene

Hui Shao,Yingzhou Lu,Xin Liang,Chunxi Li

DOI: https://doi.org/10.3390/catal14020093

IF: 3.9

2024-01-24

Catalysts

Abstract:Ionic liquids (ILs) are green solvents involved in chemical reaction and separation processes. In this paper, four ILs-based metal catalysts were prepared by dissolving four transition metal chlorides into 1-butyl-3-methylimidazolium chloride ([Bmim]Cl). Their catalytic performance was measured, and the catalytic mechanism was studied via density functional theory (DFT) based on the analysis of the Mayer bonding order, Mulliken charge, molecular electrostatic potential (ESP), electron localization function (ELF), and partial density of states (PDOS). The results show that the catalytic activity follows the order [Bmim]Cl-RuCl3 > [Bmim]Cl-AgCl > [Bmim]Cl-CuCl2 > [Bmim]Cl-CuCl. [Bmim]Cl helps to dissolve and activate HCl, and the metal chlorides can greatly reduce the activation energy of the reaction. This study provides new insights into the catalytic mechanism of IL, transition metals, and their synergistic effect from a microscopic point of view and sheds light on the development of new catalysts for acetylene hydrochlorination.

chemistry, physical
Catalysis of the acetylene hydrochlorination reaction by Si-doped Au clusters: a DFT study

Yu Zhao,Fei Zhao,Lihua Kang

DOI: https://doi.org/10.1007/s00894-018-3602-2

IF: 2.172

2018-02-20

Journal of Molecular Modeling

Abstract:The mechanisms for the acetylene hydrochlorination reaction on pristine Au7 and Au8 clusters and on the Si-doped Au clusters Au6Si and Au7Si were systematically investigated via density functional theory using the PBE functional. The band gap (∆Eg) of the Au7Si cluster was found to smaller than that of its undoped equivalent (Au8), thus enhancing its catalytic activity, and Au7Si presented a significantly reduced activation barrier (16.69 kcal mol−1) for the acetylene hydrochlorination reaction compared with the pristine Au8 cluster (21.83 kcal mol−1). On the other hand, the activation barrier for the acetylene hydrochlorination reaction was not lower for the Au6Si cluster than for the pristine Au7 cluster because the band gap (∆Eg) of Au6Si was found to be larger than that of Au7. Hence, the current work shows that the catalytic activities of gold clusters can be systematically modified by doping them. Our findings also suggest how to enhance the acetylene hydrochlorination reaction by doping foreign atoms into Au clusters.Graphical abstractThe Si-doped Au7Si cluster showed stronger catalytic activity for the acetylene hydrochlorination reaction compared with the pristine Au8 cluster.

chemistry, multidisciplinary,biochemistry & molecular biology,biophysics,computer science, interdisciplinary applications
Single Au Anion Can Catalyze Acetylene Hydrochlorination: Tunable Catalytic Performance from Rational Doping

Sajjad Ali,Samson Olanrele,TianFu Liu,Zan Lian,Chaowei Si,Min Yang,Bo Li

DOI: https://doi.org/10.1021/acs.jpcc.9b07557

2019-01-01

The Journal of Physical Chemistry C

Abstract:In this work, for the first time it is demonstrated that supported single Au in either a positive or a negative charge state can catalyze acetylene hydrochlorination competitively with regard to other reported Au catalysts by using first-principle calculations. The nitrogen and boron dopants on the single-walled carbon nanotube (SWCNT) not only behave as stable anchoring positions for the single Au but also effectively adjust the electronic structure of Au. It is revealed that Au becomes positively and negatively charged on nitrogenand boron-doped SWCNT, respectively. The different charge state of Au directly influences the interactions with the reactants C2H2. Moreover, the charge transfer during C2H2 adsorption exhibits an opposite effect for Au cation and anion. Therefore, the dopant on the support is effectively a tool to tune the properties of the supported single Au. The reaction obeys an Eley-Rideal-like mechanism, in which C2H2 binds first, followed by HCI activation and product formation. Detailed reaction pathway analysis reveals that both positively and negatively charged Au are active acetylene hydrochlorination catalysts with comparable reaction barriers. The current work not only broadens the scope of Au catalysts in acetylene hydrochlorination, with the inclusion of negative Au, but also verifies the effectiveness of support doping to tune the catalytic performance.
Single-Atom AuI–N3 Site for Acetylene Hydrochlorination Reaction

Zheng Chen,Yinjuan Chen,Songlin Chao,Xiaobin Dong,Wenxing Chen,Jun Luo,Chenguang Liu,Dingsheng Wang,Chen,Wei Li,Jun Li,Yadong Li

DOI: https://doi.org/10.1021/acscatal.9b05212

IF: 12.9

2020-01-01

ACS Catalysis

Abstract:The gold-catalyzed acetylene hydrochlorination reaction is an important process to produce vinyl chloride monomer in the polyvinyl chloride industry. The traditional catalyst of carbon-supported AuCl3 is inclined to be reduced by acetylene and lose its activity during the reaction process. Here, we presented the construction of Au-I-N-3 active sites through single gold atom dispersed on g-C3N4 (Au-1/g-C3N4), which shows robust catalytic performance toward acetylene hydrochlorination. The Au species is shown to have Au' oxidation state, and it is coordinated with three nitrogen atoms of tri-s-triazine repeating units, which is consistent with density functional theory (DFT) modeling and XAFS measurements. Through DFT study, we demonstrate that the Au-I-N-3 sites tend to coordinate with HCl than C2H2 in the initial reaction. The Au-I-N-3 sites cannot be reduced into Au-0 oxidation state easily and thus maintain their activity as stable catalytic active sites. The single-atom-site Au catalyst with nitrogen coordination environment and corresponding electronic state provides an efficient pathway for acetylene hydrochlorination reaction.
Ionic Liquid‐Silver Catalysts For Acetylene Acetoxylation At Tow‐Temperature

Qi Zhuang,Xunchao Zhang,Mingyuan Zhu,Bin Dai

DOI: https://doi.org/10.1002/cctc.202400428

IF: 4.5

2024-04-16

ChemCatChem

Abstract:It was crucial to develop a catalyst with high catalytic activity at iow temperatures, as the zinc‐based catalysts were prone to deactivation in the high‐temperature reaction of acetylene acetoxylation, and ionic liquid (IL)‐silver (Ag) catalysts were synthesized and applied in acetylene acetoxylation. The X‐ray diffraction, transmission electron microscopy, and X‐ray photoelectron spectroscopy characterizations displayed that Ag species were stabilized in the state of Ag+, and the dispersion of the Ag active species was effectively improved in supported‐ionic‐liquid‐phase (SILP) system. Furthermore, we prepared Ag‐IL liquid phase catalysts for catalyzing acetylene acetoxylation in liquid phase systems. It was demonstrated that the presence of ILs could effectively stabilize the Ag+ active site. The catalytic performance of the Ag‐IL/AC catalyst prepared in this article at a low temperature of 180 °C was 2.5 times that of the traditional Zn/AC catalyst. The development of low‐temperature catalysts would play a driving role in the development of acetylene acetoxylation.

chemistry, physical
Reaction-Driven Dynamic and Reversible Transformations of Au Single Atoms and Au-Zr Alloys on Zirconia for Efficient Acetylene Hydrochlorination

Yuxue Yue,Bolin Wang,Jiale Huang,Saisai Wang,Chunxiao Jin,Renqin Chang,Zhiyan Pan,Yihan Zhu,Jia Zhao,Xiaonian Li

DOI: https://doi.org/10.1021/acsami.3c18532

2024-04-03

Abstract:Catalysis involving gold supported on metal oxides has undergone extensive examination. However, the nature of the catalytic site under actual reaction conditions and the role of the support continue to be vigorously debated. This study addresses these issues through experimental investigations and theoretical simulations. We explore a novel catalytic mechanism that employs dynamic single-atom catalysis for the hydrochlorination of acetylene. This catalytic mechanism occurs in defective ZrO2-supported Au-Zr single-atom alloys. Specifically, the dynamic single-atom catalysis is a result of the mobility of the gold cation, which is accelerated by Cl radicals and strongly couples with the abundant unsaturated surface sites of ZrO2 in a synergistic manner. As a result, the Au electronic structure dynamically evolves, leading to a decrease in the addition reaction energy barrier. Notably, the Au cation can detach from the Au-Zr alloy structure to catalyze the hydrochlorination of acetylene near the Zr-Ov-Zr sites and then reintegrate back into the Au-Zr alloy structure upon completion of the reaction. This study underscores the significance of dynamic active sites under reaction conditions and their pivotal role in catalysis.
Effect of the Transforming Ag into an Active Species (Silver Chloride) for the Acetylene Hydrochlorination

Li Liu,Lutai Song,Dong Xu,Mingyuan Zhu,Bin Dai

DOI: https://doi.org/10.1002/cctc.202101022

IF: 4.5

2021-09-20

ChemCatChem

Abstract:Effective approaches are desired to improve catalytic performances for the hydrochlorination of acetylene. Crucially, the systematic explorations of catalytic and deactivation mechanisms are prerequisites to the implementation of such approaches. Ag has been scarcely researched for acetylene hydrochlorination reaction because it is easily poisoned by Cl, which inactivates it. However, this challenge must be further verified. Here, the active species and causes of the inactivation of Ag/activated carbon (AC) were detailedly discussed. The results indicated that Ag/AC exhibited excellent catalytic performance in the acetylene hydrochlorination. Specifically, X-ray photoelectron spectroscopy (XPS) analysis revealed that AgCl was the main active site, which was almost transformed from Ag 0 after the activation with HCl for 0.5 h. Moreover, Inductively Coupled Plasma Optical Emission Spectrometer (ICP-OES) and transmission electron microscopy (TEM) results confirmed that the deactivation of the catalyst was justified by the loss of Ag and particle aggregation. Thus, the conversion of acetylene of the small-sized AgCl nanoparticles were significantly enhanced, and these inhibited the agglomeration of the particles, thereby further verifying that AgCl was the active site. This perspective offered a suitable insight for the subsequent research on Ag-based catalysts.

chemistry, physical
Study on the Effects of Acetylene on an Au–Cu/C Catalyst for Acetylene Hydrochlorination Using Monte Carlo and DFT Methods

Junmei Ma,Shengjie Wang,Benxian Shen

DOI: https://doi.org/10.1007/s11144-013-0583-0

2013-01-01

Reaction Kinetics Mechanisms and Catalysis

Abstract:Effects of acetylene on a bimetallic Au–Cu/C catalyst for the hydrochlorination of acetylene were investigated. The deactivation of catalyst was observed after acetylene treatment. This result could be ascribed to the reduction of active species and carbon deposition on the surface of the catalyst. DFT calculations indicated that multi-adsorption of acetylene could take place on the surface of catalyst leading to active species loss. Monte Carlo simulations show that excess hydrogen chloride could be favorable to minimize the negative effects of acetylene by timely converting the adsorbed acetylene into vinyl chloride.
Kinetics of Acetylene Hydrochlorination over Bimetallic Au–Cu/C Catalyst

Shengjie Wang,Benxian Shen,Qinglei Song

DOI: https://doi.org/10.1007/s10562-009-0216-4

IF: 2.936

2009-01-01

Catalysis Letters

Abstract:A kinetic model of the acetylene hydrochlorination over the bimetallic Au–Cu/C catalyst was obtained on the basis of kinetic data. DFT theoretical calculation and the kinetic model indicated the reaction probably proceeds via the Eley-Rideal mechanism in which gas phase HCl reacts with the adsorbed C2H2 to produce vinyl chloride. Reaction conditions were optimized according to kinetics analyses. Under the optimized reaction conditions obtained, the bimetallic Au–Cu/C showed excellent performances with more than 99.5% conversion and selectivity and did not deactivate in 200 h on stream.
In Situ Surface Structures of PdAg Catalyst and Their Influence on Acetylene Semihydrogenation Revealed by Machine Learning and Experiment

Xiao-Tian Li,Lin Chen,Cheng Shang,Zhi-Pan Liu

DOI: https://doi.org/10.1021/jacs.1c02471

IF: 15

2021-04-20

Journal of the American Chemical Society

Abstract:PdAg alloy is an industrial catalyst for acetylene-selective hydrogenation in excess ethene. While significant efforts have been devoted to increase the selectivity, there has been little progress in the catalyst performance at low temperatures. Here by combining a machine-learning atomic simulation and catalysis experiment, we clarify the surface status of PdAg alloy catalyst under the reaction conditions and screen out a rutile-TiO2 supported Pd1Ag3 catalyst with high performance: i.e., 85% selectivity at >96% acetylene conversion over a 100 h period in an experiment. The machine-learning global potential energy surface exploration determines the Pd-Ag-H bulk and surface phase diagrams under the reaction conditions, which reveals two key bulk compositions, Pd1Ag1 (R3̅m) and Pd1Ag3 (Pm3̅m), and quantifies the surface structures with varied Pd:Ag ratios under the reaction conditions. We show that the catalyst activity is controlled by the PdAg patterns on the (111) surface that are variable under reaction conditions, but the selectivity is largely determined by the amount of Pd exposure on the (100) surface. These insights provide the fundamental basis for the rational design of a better catalyst via three measures: (i) controlling the Pd:Ag ratio at 1:3, (ii) reducing the nanoparticle size to limit PdAg local patterns, (iii) searching for active supports to terminate the (100) facets.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/jacs.1c02471?goto=supporting-info">https://pubs.acs.org/doi/10.1021/jacs.1c02471</a>.Theoretical methodology and the construction of the quaternary Pd-Ag--H G-NN potential, surface structures of Pd1Ag1, electronic structures of Pd/Pd1Ag3(111) and Pd3Ag1/Pd1Ag1(100), kinetic parameters utilized in microkinetic simulations, preliminary results for PdAg nanoparticles on TiO2, and experimental details of the synthesis and characterization of different acetylene hydrogenation catalysts (<a class="ext-link" href="/doi/suppl/10.1021/jacs.1c02471/suppl_file/ja1c02471_si_001.pdf">PDF</a>)XYZ coordinates for the key structure configurations in <a class="internalNav" href="#fig3">Figure </a><a class="internalNav" href="#fig3">3</a> (<a class="ext-link" href="/doi/suppl/10.1021/jacs.1c02471/suppl_file/ja1c02471_si_002.xyz">XYZ</a>)This article has not yet been cited by other publications.

chemistry, multidisciplinary

Ionic Liquids-Coordinated Au Catalysts for Acetylene Hydrochlorination: DFT Approach Towards Reaction Mechanism and Adsorption Energy

Efficient Au-0/C Catalyst Synthesized by A New Method for Acetylene Hydrochlorination

On the Origin of Room–temperature, Au+‐mediated Coupling of a Methylene Ligand with H2. Implications for the Mechanism of Methane Dehydrogenation.

Improvement of performance of a Au–Cu/AC catalyst using thiol for acetylene hydrochlorination reaction

Catalytic Behavior of Au Confined in Ionic Liquid Film: A Kinetics Study for the Hydrochlorination of Acetylene

Density Functional Theory Study of a Graphdiyne-Supported Single Au Atom Catalyst for Highly Efficient Acetylene Hydrochlorination

Understanding the Role of Au in the Selective Hydrogenation of Acetylene on Trimetallic PdAgAu Catalytic Surface

Step Site-Specific Semihydrogenation of Acetylene on the Au Surface

Supported ionic liquid-copper catalyst for synergistically catalytic and highly efficient hydration of acetylene

Mechanistic Insight into Acetylene Hydrochlorination with Ru-Ligands via Dual Activation Promoted by Metal-Ligands Cooperative Catalysis

Highly Selectivity Catalytic Hydrogenation of Acetylene on Al2O3 Supported Palladium-Imidazolium Based Ionic Liquid Phase

The Catalytic Mechanism of [Bmim]Cl-Transition Metal Catalysts for Hydrochlorination of Acetylene

Catalysis of the acetylene hydrochlorination reaction by Si-doped Au clusters: a DFT study

Single Au Anion Can Catalyze Acetylene Hydrochlorination: Tunable Catalytic Performance from Rational Doping

Single-Atom AuI–N3 Site for Acetylene Hydrochlorination Reaction

Ionic Liquid‐Silver Catalysts For Acetylene Acetoxylation At Tow‐Temperature

Reaction-Driven Dynamic and Reversible Transformations of Au Single Atoms and Au-Zr Alloys on Zirconia for Efficient Acetylene Hydrochlorination

Effect of the Transforming Ag into an Active Species (Silver Chloride) for the Acetylene Hydrochlorination

Study on the Effects of Acetylene on an Au–Cu/C Catalyst for Acetylene Hydrochlorination Using Monte Carlo and DFT Methods

Kinetics of Acetylene Hydrochlorination over Bimetallic Au–Cu/C Catalyst

In Situ Surface Structures of PdAg Catalyst and Their Influence on Acetylene Semihydrogenation Revealed by Machine Learning and Experiment