Waterborne Polyurethanes Prepared from Benzophenone Derivatives with Delayed Fluorescence and Room-Temperature Phosphorescence

Tao Wang,Cao Zhou,Xingyuan Zhang,Dong Xu

DOI: https://doi.org/10.1039/c7py01995e

IF: 4.6

2018-01-01

Polymer Chemistry

Abstract:Charge-transfer states serve as a bridge between singlet and triplet states and polymerization can further promote communication between them.

What problem does this paper attempt to address?

Waterborne Polyurethanes with Tunable Fluorescence and Room-Temperature Phosphorescence

cao zhou,tongqing xie,rui zhou,carl trindle,yavuz tikman,xingyuan zhang,guoqing zhang

DOI: https://doi.org/10.1021/acsami.5b04075

IF: 9.5

2015-01-01

ACS Applied Materials & Interfaces

Abstract:Single-component materials with both fluorescence and room-temperature phosphorescence (RTP) are useful for ratiometric sensing and imaging applications. On the basis of a general design principle, an amino-substituted benzophenone is covalently incorporated into waterborne polyurethanes (WPU) and results in fluorescence and RTP single-component dual-emissive materials (SDMs). At different aminobenzophenone concentrations, the statistical, thermal, and optical properties of these SDMs are characterized. Despite their similar thermal behaviors, the luminescence properties as a function of the chromophore concentration are quite different: increasing concentrations led to progressively narrowed singlet triplet energy gaps. The tunability of fluorescence and RTP via chromophore concentration is explained by a previously proposed model, polymerization-enhanced intersystem crossing (PEX). The proposal of PEX is based on Kasha's molecular exciton theory with a specific application in polymeric systems, where the polymerization of luminophores results in excitonic coupling and enhanced forward and reverse intersystem crossing. The mechanism of PEX is also examined by theoretical calculations for the WPU system. It is found that the presence of K1 aggregates indeed enhances the crossover from singlet excited states to triplet ones.
Dual-Emissive Waterborne Polyurethanes Prepared from Naphthalimide Derivative

Tao Wang,Xingyuan Zhang,Yipeng Deng,Wei Sun,Qidong Wang,Fei Xu,Xiaowen Huang

DOI: https://doi.org/10.3390/polym9090411

IF: 5

2017-01-01

Polymers

Abstract:Fluorescent and room-temperature phosphorescent (RTP) materials are widely used in bioimaging, chemical sensing, optoelectronics and encryption. Here, a series of single-component dual-emissive waterborne polyurethanes (WPUs) with both fluorescence and room-temperature phosphorescence were synthesized. Dye without halogen atom incorporated into WPUs can only exhibit fluorescence due to poor spin-orbit coupling. When bromine atom is introduced into dye, we found that WPUs can emit both fluorescence and room-temperature phosphorescence with lifetimes up to milliseconds because of enhanced spin-orbit coupling. Moreover, with an increase in dye concentrations in WPUs, excimers are formed due to the aggregation effect, and may promote communication between singlet and triplet states. At different dye concentrations, structural, thermal, and luminescent properties serve as the main focus.
Modulation of Thermally Activated Delayed Fluorescence in Waterborne Polyurethanes Via Charge-Transfer Effect.

Zongren Li,Tao Wang,Dong Xu,Jie Zuo,Xinyu Li,Zhiwei Li,Fei Xu,Xingyuan Zhang

DOI: https://doi.org/10.1002/asia.201900423

2019-01-01

Chemistry - An Asian Journal

Abstract:Here, we designed several waterborne polyurethanes (WPUs) with efficient thermally activated delayed fluorescence (TADF) via serving charge-transfer (CT) states as a mediate bridge between singlet and triplet states to boost reverse intersystem crossing (RISC). By tuning substituents of diphenyl sulfone (DS), we found that O, O'- and S,S'-substituted DS covalently incorporated in WPUs solely show typical fluorescence emission with lifetimes in the nanosecond range. Interestingly, TADF appears by replacing the substituent with the nitrogen atom, of which lifetimes are up to approximate to 10 microseconds and approximate to 1 millisecond in air and vacuum, respectively, even though the energy gap between singlet and triplet states (Delta E-ST) is still large for generating TADF. To explain this phenomenon, an energy level mode based on CT states and an (3)(n-pi*) receiver state was proposed. By the rational modulation of CT states, it is possible to tune the Delta E-ST to render TADF-based materials suitable for versatile applications.
Preparation of Waterborne Polyurethane with Outstanding Fluorescence Properties and Programmable Emission Intensity

Can Tao,Xixi Han,Junjie Bao,Qin Chen,Yiping Huang,Gewen Xu

DOI: https://doi.org/10.1002/pi.5310

IF: 3.213

2017-01-01

Polymer International

Abstract:The hard segment content and hydrophilic group content of a fluorescent waterborne polyurethane (FWPU) were used to optimize the polymer structure which can influence the fluorescence properties. The synthesis of FWPU was based on 2,2'-((4-([3,3': 6', 2''-terpyridine]-4'-yl) phenyl) azanediyl) diethanol (TPPDA) as fluorophore. The structure of FWPU was characterized using Fourier transform infrared and H-1 NMR spectroscopies, and the polymer molecular weight and polydispersity were measured using gel permeation chromatography. The relationship between fluorescence properties and FWPU structure was studied using luminescence spectrometry. Compared to TPPDA, the maximum emission wavelength of FWPU showed a hypsochromic shift, and the fluorescence emission intensity and quantum yield of FWPU were increased obviously. Moreover, increasing the hard segment content led to an enhancement of the fluorescence lifetime of FWPU, and to the fluorescence intensity increasing at first and then decreasing. The fluorescence emission intensity and quantum yield of FWPU were increased nearly 11 and 7 times, respectively, compared to TPPDA when the hard segment content was 65%. With an increase of hydrophilic group content, the fluorescence emission intensity of FWPU increased. The fluorescence emission intensity of FWPU exhibited a response to pH, which facilitated its employment as a fluorescence probe. FWPU with excellent solid fluorescence is very suitable for processing into optical devices, with increasing hard segment content and hydrophilic group content both enhancing the solid fluorescence emission intensity of FWPU. (C) 2016 Society of Chemical Industry
Synthesis and Characterization of Fluorescent Waterborne Polyurethane Based on 4'-P-n,n-bis(2-hydroxyethyl)benzyl-3,3':6',2''-Terpyridine

Xixi Han,Can Tao,Zhiqian Xie,Junjie Bao,Yiping Huang,Gewen Xu

DOI: https://doi.org/10.7317/pk.2017.41.3.378

2017-01-01

Polymer Korea

Abstract:Cationic waterborne polyurethane fluorescent material based on 4'-p-N,N-bis(2-hydroxyethyl)benzyl-3,3':61,2 ''-terpyridine (TPPDA-CWPU) was synthesized. The structure was characterized by FfIR and UV-vis spectroscopy. The content of TPPDA in the fluorescent polyurethane was 6.3x10(-4) mg/mg and the grating ratio was 33.87%. The number averaged and weight-average molecular weights of TPPDA-CWPU were about 16060 and 27131 g.mol(-1), respectively. The maximum absorption wavelength of TPPDA-CWPU was blue shifted ca. 6 nm compared to TPPDA. TPPDA-CWPU showed different fluorescence properties under different solid content. Compared with 20% solid content, the fluorescence intensity of 1% solid content increased by ten times. The quantum yield of TPPDA-CWPU was 0.3, which was four times higher than that of TPPDA. Moreover, TPPDA-CWPU was sensitive to acidic condition and there was the phenomenon of fluorescence quenching in the case of strong acidic conditions. It is believed that more applications will be possible in the pH-responsive polymer.
Waterborne polyacrylates with thermally activated delayed fluorescence and two-state phosphorescence

Tao Wang,Zhen Tang,Dong Xu,Wei Sun,Yipeng Deng,Qidong Wang,Xingyuan Zhang,Peifeng Su,Guoqing Zhang

DOI: https://doi.org/10.1039/c7qm00399d

IF: 8.6834

2018-01-01

Materials Chemistry Frontiers

Abstract:Purely organic luminescent materials are extensively used in bioimaging, sensing and organic light-emitting diodes (OLEDs). Anthraquinone (AQ) derivatives with N- and O-substitution are incorporated into waterborne polyacrylates as single-component polymers with both thermally activated delayed fluorescence (TADF) and two-state phosphorescence. Essential structural and optical properties are characterized for these waterborne polyacrylates. With increasing dye loadings, a convergence between singlet and triplet states due to excitonic splittings is observed.
Color-tunable and Ultralong Organic Room Temperature Phosphorescence from Poly(acrylic Acid)-Based Materials Through Hydrogen Bond Engineering

Liuqi Kong,Yan Zhu,Shaochen Sun,Hongye Li,Farong Tao,Fei Li,Liping Wang,Guang Li

DOI: https://doi.org/10.1039/d2tc04789f

IF: 6.4

2023-01-01

Journal of Materials Chemistry C

Abstract:Color-tunable and ultralong organic room temperature phosphorescence (URTP) materials have drawn extensive attention due to their various applications in many fields. Herein, a series of poly(acrylic acid) (PAA)-based RTP materials are facilely constructed through hydrogen bond engineering by binary doping of PAA with phenylboric acid and benzoic acid derivatives. PAA-based RTP materials all exhibit long lifetimes, and PAA-4-carboxyphenylboronic acid (PAA-CPBA) shows durable afterglow (more than 12 s) with an ultralong phosphorescence lifetime (up to 536 ms) under ambient conditions. PAA-1,4-benzendiboronic acid (PAA-BDA) displays multicolor tunable phosphorescence by changing the excitation wavelengths or BDA doping concentrations. Most impressively, the phosphorescence color of PAA-CPBA can change from blue to green by water vapor fumigation, and return to blue again through heating treatment. After sequential water vapor and heating treatment, the phosphorescence peak of PAA-CPBA is red-shifted from 425 nm to 525 nm with the excitation wavelength increasing from 230 to 300 nm. PAA-based RTP materials are further applied in information encryption and rewritable paper on the basis of the properties of ultralong luminescence lifetime and color-tunability. This work provides inspiration for the design and preparation of color-tunable polymer-based URTP materials.
Photoluminescent nanoparticles in water with tunable emission for coating and ink-jet printing

chao deng,zhening yang,zhicheng zheng,na liu,jun ling

DOI: https://doi.org/10.1039/c5tc00318k

IF: 6.4

2015-01-01

Journal of Materials Chemistry C

Abstract:We report a novel fluorescent polyfluorene-containing methacrylate macromonomer (PFMA) and its well-defined copolymers with 2-(dimethylamino) ethyl methacrylate (DMAEMA) [P(PFMA-r-DMAEMA)s] via reversible addition-fragmentation chain transfer (RAFT) polymerization. These copolymers selfassemble into photoluminescent nanoparticles in aqueous solutions and act as an excellent scaffold for the incorporation of various pigments to emit tunable colors, including white, through Forster resonance energy transfer with high quantum yield up to 0.80. The directly cast films of these NPs after evaporation of water exhibit strong colorful emission on both smooth quartz and rough plaster surfaces. The NP aqueous solutions are ready for ink-jet printing to produce exquisite fluorescent pictures.
Achieving Colorful Ultralong-Lifetime Room-Temperature Phosphorescence Based on Benzocarbazole Derivatives through Resonance Energy Transfer

Zhizheng Li,Qian Yue,Ye He,Huacheng Zhang

DOI: https://doi.org/10.1021/acsami.4c04921

IF: 9.5

2024-05-03

ACS Applied Materials & Interfaces

Abstract:It is of practical significance to develop polymer-based room-temperature phosphorescence (RTP) materials with ultralong lifetime and multicolor afterglow. Herein, the benzocarbazole derivatives were selected and combined with a poly(vinyl alcohol) (PVA) matrix by a coassembly strategy. Owing to the hydrogen-bonding interactions between benzocarbazole derivatives and the PVA matrix, the nonradiative transition and the quenching of triplet excitons are effectively inhibited. Therefore, the...

materials science, multidisciplinary,nanoscience & nanotechnology
Long Lifetime Delayed Fluorescent Materials with Water and Temperature Tolerability Based on Charge Separation States

Peng Lu,Mengdie Zhou,Danyu Gu,Yongjie Yuan,Yan Yu,Hailiang Zhang

DOI: https://doi.org/10.1002/adom.202301101

IF: 9

2023-07-23

Advanced Optical Materials

Abstract:Preparation of a series of long lifetime delayed fluorescence copolymers with water and temperature tolerability based on charge separated states is proposed. The P3 copolymer can emit an afterglow for 1.00 s. After immersing P3 in water for 49 days, the afterglow duration remains unchanged. Significantly, the afterglow can persist for 0.43 s at 323 K. Long lifetime delayed fluorescent materials have great potential applications in bioimaging, anti‐counterfeiting encryption, lighting, and other fields. However, the preparation of functionalized long lifetime fluorescent materials with simple chemical structure and tunable luminescent behavior still poses significant challenges. In this article, a simple and effective method to prepare a series of long lifetime delayed fluorescent copolymers with temperature and humidity tolerance is presented. This method involves the copolymerization of 2‐bromo‐5‐hydroxybenzaldehyde derivative monomer (M1), which contains electron‐withdrawing groups, with naphthalimide derivative fluorescent monomer (M2), which contains electron‐donating groups. The results demonstrate that long‐range charge transfer occurs between the two components in copolymers, forming charge‐separated states that emit long lifetime delayed fluorescence after exciton recombination. The delayed luminescent behavior of the copolymer is directly influenced by the content of the M2 component. The maximum delayed fluorescence lifetime can reach 13.7 ms, and the fluorescence quantum yield is 39%. Interestingly, the polymer film of P3 can emit a maximum afterglow of 1.00 s after photoactivation. Even after being immersed in water for 49 days, the afterglow remains unchanged. Besides, the afterglow of P3 can exist for ≈0.43 s at 323 K. Even at 373 K, the afterglow for 0.2 s can still be observed.

materials science, multidisciplinary,optics
Protonation-Induced Room-Temperature Phosphorescence In Fluorescent Polyurethane

Wei Sun,Zhaowu Wang,Tao Wang,Li Yang,Jun Jiang,Xingyuan Zhang,Yi Luo,Guoqing Zhang

DOI: https://doi.org/10.1021/acs.jpca.7b01711

2017-01-01

Abstract:Room-temperature phosphorescence (RTP) from purely organic systems is of practical importance in biological imaging, oxygen sensing and displaying technologies. The key step to obtaining RTP from organic molecules is efficient intersystem crossing (ISC), which is usually low compared to inorganic materials. Here we show that protonation of a dye molecule, a thioflavin derivative, in strongly polar polyurethane can be used to effectively harness RTP. Prior to protonation, the predominant transition is pi-pi* for the polymer, which has nearly undetectable RTP due to the large singlet triplet energy splitting (0.87 eV).; when Bronsted acids are gradually added to the system, increasingly strong RTP is observed due, to the presence of a new intramolecular charge-transfer (ICT). The ICT state serves to lower the singlet-triplet energy gap (0.46 eV). The smaller gap results in more efficient ISC and thus strong RTP under deoxygenated conditions. The thioflavin-polyurethane system can be tuned via proton concentration and counterions and opens new doors for RTP-based polymeric sensors and stimuli-responsive materials. state
Ultralong Room-Temperature Phosphorescence from Polycyclic Aromatic Hydrocarbons by Accelerating Intersystem Crossing within Rigid Polymer Network

Xiao Meng,Qian Hu,Xi Wang,Tengfei Ma,Weimin Liu,Xingjun Zhu,Chunhong Ye

DOI: https://doi.org/10.1039/d2tc02557d

IF: 6.4

2022-11-02

Journal of Materials Chemistry C

Abstract:Polymer-based room temperature phosphorescence has attracted great attentions for the potential applications in organic light-emitting diodes, sensors, data encryption, and anti-counterfeiting. One of the most applied strategies to realize efficient room-temperature phosphorescence (RTP) is to suppress the non-radiative transition by introducing secondary interactions (hydrogen bonding, ionic bonding etc.) between phosphors and polymer matrix. However, water and moisture will turn off the phosphorescence emission by damaging the hydrogen bonding network. Besides, the role of the polymer matrix on the photophysical process is still under developing. Herein, we successfully achieved robust long-lived room temperature phosphorescence materials based on purely polycyclic aromatic hydrocarbons (PAHs) by in-situ doping with rigid polymer network during polymerization. The materials exhibited ultralong phosphorescence lifetime up to 1.27 s, large Stokes shift of 233 nm and a remarkable duration of afterglow over 12 s, which are extremely stable even under aqueous surrounding. Photophysical analysis and transient absorption spectroscopy reveal that the phosphorescence is facilitated by accelerating the intersystem crossing (ISC) from singlet to triplet states and suppressing the non-radiative transition of the triplet excitons within the rigid polymer matrix. Furthermore, 3D phosphorescent structures and 2D large-scale, transparent display with re-writable encoded information are fabricated with the facilely processing PAHs@polymer RTP materials.

materials science, multidisciplinary,physics, applied
Synthesis and Optical Performances of a Waterborne Polyurethane-Based Polymeric Dye

Xianhai Hu,Xingyuan Zhang,Jin Liu

DOI: https://doi.org/10.1155/2015/425083

2015-01-01

International Journal of Polymer Science

Abstract:A waterborne polyurethane-based polymeric dye (WPU-CFBB) was synthesized by anchoring 1, 4-bis(methylamino)anthraquinone (CFBB) to waterborne polyurethane chains. The number molecular weight, glass transition temperature, and average emulsion particle size for the polymeric dye were determined, respectively. This polymeric dye exhibited intriguing optical behaviors. The polymeric dye engendered two new absorption bands centered at about 520 nm and 760 nm if compared with CFBB in UV-vis spectra. The 760 nm peak showed hypsochromic shift with the decrease of average particle sizes. The polymeric dye dramatically demonstrated both hypsochromic and bathochromic effects with increasing temperature. The fluorescence intensity of the polymeric dye was much higher than that of CFBB. It was found that the fluorescence intensities would be enhanced from 20°C to 40°C and then decline from 40°C to 90°C. The fluorescence of the polymeric dye emulsion was very stable and was not sensitive to quenchers.
Synergetic enhancement of room-temperature phosphorescence via water molecules as a hydrogen bonding bridge

Hao Gao,Bingbing Ding,Chao Wang,Xiang Ma

DOI: https://doi.org/10.1039/d1tc03740d

IF: 6.4

2021-01-01

Journal of Materials Chemistry C

Abstract:To improve the water and oxygen resistance of room-temperature phosphorescence based on copolymerization strategy, a facile secondary processing strategy using water as the hydrogen bridge was proposed, which extended the lifetime and quantum yield.

materials science, multidisciplinary,physics, applied
Synergetic Enhancement of Room-Temperature Phosphorescenceviawater Molecules As a Hydrogen Bonding Bridge

Hao Gao,Bingbing Ding,Chao Wang,Xiang Ma

DOI: https://doi.org/10.1039/d1tc03740d

IF: 6.4

2021-01-01

Journal of Materials Chemistry C

Abstract:To improve the water and oxygen resistance of room-temperature phosphorescence based on copolymerization strategy, a facile secondary processing strategy using water as the hydrogen bridge was proposed, which extended the lifetime and quantum yield.
Converting Molecular Luminescence to Ultralong Room-Temperature Phosphorescence Via the Excited State Modulation of Sulfone-Containing Heteroaromatics.

Zetong Ma,Zhiqiang Yang,Lan Mu,Lisong Deng,Liangjian Chen,Bohan Wang,Xianfeng Qiao,Dehua Hu,Bing Yang,Dongge Ma,Junbiao Peng,Yuguang Ma

DOI: https://doi.org/10.1039/d1sc04118e

IF: 8.4

2021-01-01

Chemical Science

Abstract:Manipulating the molecular orbital properties of excited states and the subsequent relaxation processes can greatly alter the emission behaviors of luminophores. Herein we report a vivid example of this, with luminescence conversion from thermally activated delayed fluorescence (TADF) to ultralong room-temperature phosphorescence (URTP) via a facile substituent effect on a rigid benzothiazino phenothiazine tetraoxide (BTPO) core. Pristine BTPO with multiple heteroatoms shows obvious intramolecular charge transfer (ICT) excited states with small exchange energy, featuring TADF. Via delicately functionalizing the BTPO core with peripheral moieties, the excited states of the BTPO derivatives become a hybridized local and charge transfer (HLCT) state in the S-1 state and a local excitation (LE) dominated HLCT state in the T-1 state, with enlarged energy bandgaps. Upon dispersion in a polymer matrix, the BTPO derivatives exhibit a persistent bright green afterglow with long lifetimes of up to 822 ms and decent quantum yields of up to 11.6%.
Ph-Responsive Amorphous Room-Temperature Phosphorescence Polymer Featuring Delayed Fluorescence Based on Fluorescein

Guanghui Wang,Zifei Wang,Bingbing Ding,Xiang Ma

DOI: https://doi.org/10.1016/j.cclet.2021.03.054

IF: 9.1

2021-01-01

Chinese Chemical Letters

Abstract:Numerous researchers have paid attention to achieve metal-free phosphorescence by exploring new structures or new mechanisms. Herein, a facile way is introduced to endow a common fluorescence dye,tetrabromofluorescein（4 Br-Flu）, some fabulous optical characteristics such as dual emission including thermally activated delayed fluorescence, room-temperature phosphorescence（RTP）, and the excellent pH-sensitivity. Shortly, 4 Br-Flu with good light-emitting properties is composed into the polymer system. The multiple bromine atoms promote the spin-orbit coupling effect and facilitate triplet excitation. Especially, the hydrogen bonding network of the polymer restricts the molecular motion of4 Br-Flu so that the system can emit long-wavelength RTP when 4 Br-Flu is doped into polyvinyl alcohol or co-polymerized with acrylamide. Due to the reversible transformation of protonation and deprotonation,the 4 Br-Flu based polymer responded to acid and alkali like a phosphorescent switch which makes it an excellent hydrogen chloride/ammonia gas leak detector in dry environment.
Time-dependent Color-Tunable Room Temperature Phosphorescence from Unusual Conformational Transitions in Phenothiazine Polymers under UV Irradiation

Jiwen Lu,Yifan Niu,Chanjuan Jin,Chengheng Wu,Hanyu Wang,Yan Guan,Ping Wang,Xinghe Fan

DOI: https://doi.org/10.1007/s11426-024-2270-x

2024-01-01

Science China Chemistry

Abstract:Achieving color-tunable room-temperature phosphorescence (RTP), especially including blue RTP from a single-component polymer still faces a formidable challenge. Herein, we wisely choose conformation-dependent phenothiazine with trifluoromethyl substituent as the side group of the phosphor monomer (CzPT) and then copolymerize it with N-isopropylacrylamide (NIPAM) through photopolymerization to obtain polymers PPCzPTs. Time-dependent color-tunable phosphorescence from unusual quasi-equatorial (eq) to quasi-axial (ax) conformers are obtained, and the RTP color changes from orange (550 nm) to blue (470 nm) with phosphorescence lifetime up to 0.96 s. The theoretical calculations confirm that the quasi-axial conformer is the preferred structure that facilitates the formation of intramolecular hydrogen bonds on the trifluoromethyl group. The EPR spectra illustrate that the persistent UV irradiation generates radical cations to induce the conformational transitions first, followed by photopolymerization immobilizing the ax conformation in PPCzPTs. Applications of data encryption and anti-counterfeiting are fabricated to show prompt and delayed multicolor information. This work affords a simple and feasible avenue for two-dimensional color tunable room temperature phosphorescence from a single-component polymer.
Controlling the efficient and ultralong room-temperature phosphorescence of 9H-dibenzo[a,c]carbazole derivatives for erasable light printing

Wei Cai,Lingqi Zuo,Shiya Feng,Pengtao Hu,Hengshan Wei,Zhexian Zhang,Hongru Wu,Leyu Wang,Yuhai Wang,Guang Shi,Bingjia Xu

DOI: https://doi.org/10.1039/d3qm00883e

IF: 8.6834

2023-09-14

Materials Chemistry Frontiers

Abstract:The development of intelligent polymer materials with high phosphorescence quantum yields ( Φ phos. ) and ultralong phosphorescence lifetimes ( τ phos. ) simultaneously under ambient conditions is significant but very challenging. In this work, two new organic luminogens, namely BCzS and BCzSF, were synthesized by attaching dibenzothiophene and diphenyl sulfone to the nitrogen atom of 9 H -dibenzo[ a , c ]carbazole via a palladium-catalyzed carbon-nitrogen coupling reaction, respectively. Subsequently, they were employed as guest compounds and doped into the mixtures of bisphenol A diglycidyl ether and 1, 3-propylenediamine, respectively, followed by an in-situ polymerization to produce doped epoxy polymer (EP) films BCzS-EP and BCzSF-EP. It was found that the resulting polymer films showed high Φ phos. and τ phos. values up to 13.5% and 3.01 s, respectively, and could produce conspicuous green organic afterglow with a duration time of over 20 s under ambient conditions. Moreover, the BCzS-EP and BCzSF-EP films exhibited controllable and reversible photoactivated UOP properties, in which their organic afterglow could be facilely tuned on and off by the stimuli of light and heat. Given the unique photophysical properties and excellent flexibility and transparency, the BCzSF-EP film was successfully used for erasable light printing. This work provides a new direction for developing intelligent and flexible polymer materials simultaneously with high Φ phos. and τ phos. values.

materials science, multidisciplinary,chemistry
Efficient intersystem crossing and tunable ultralong organic room-temperature phosphorescence via doping polyvinylpyrrolidone with polyaromatic hydrocarbons

Guangxin Yang,Subin Hao,Xin Deng,Xinluo Song,Bo Sun,Woo Jin Hyun,Ming-De Li,Li Dang

DOI: https://doi.org/10.1038/s41467-024-48913-x

2024-06-01

Abstract:Polymer-based pure organic room-temperature phosphorescent materials have tremendous advantages in applications owing to their low cost, vast resources, and easy processability. However, designing polymer-based room-temperature phosphorescent materials with large Stokes shifts as key requirements in biocompatibility and environmental-friendly performance is still challenging. By generating charge transfer states as the gangplank from singlet excited states to triplet states in doped organic molecules, we find a host molecule (pyrrolidone) that affords charge transfer with doped guest molecules, and excellent polymer-based organic room-temperature phosphorescent materials can be easily fabricated when polymerizing the host molecule. By adding polyaromatic hydrocarbon molecules as electron-donor in polyvinylpyrrolidone, efficient intersystem crossing and tunable phosphorescent from green to near-infrared can be achieved, with maximum phosphorescence wavelength and lifetime up to 757 nm and 3850 ms, respectively. These doped polyvinylpyrrolidone materials have good photoactivation properties, recyclability, advanced data encryption, and anti-counterfeiting. This reported design strategy paves the way for the design of polyvinylpyrrolidone-based room-temperature phosphorescent materials.

Waterborne Polyurethanes Prepared from Benzophenone Derivatives with Delayed Fluorescence and Room-Temperature Phosphorescence

Waterborne Polyurethanes with Tunable Fluorescence and Room-Temperature Phosphorescence

Dual-Emissive Waterborne Polyurethanes Prepared from Naphthalimide Derivative

Modulation of Thermally Activated Delayed Fluorescence in Waterborne Polyurethanes Via Charge-Transfer Effect.

Preparation of Waterborne Polyurethane with Outstanding Fluorescence Properties and Programmable Emission Intensity

Synthesis and Characterization of Fluorescent Waterborne Polyurethane Based on 4'-P-n,n-bis(2-hydroxyethyl)benzyl-3,3':6',2''-Terpyridine

Waterborne polyacrylates with thermally activated delayed fluorescence and two-state phosphorescence

Color-tunable and Ultralong Organic Room Temperature Phosphorescence from Poly(acrylic Acid)-Based Materials Through Hydrogen Bond Engineering

Photoluminescent nanoparticles in water with tunable emission for coating and ink-jet printing

Achieving Colorful Ultralong-Lifetime Room-Temperature Phosphorescence Based on Benzocarbazole Derivatives through Resonance Energy Transfer

Long Lifetime Delayed Fluorescent Materials with Water and Temperature Tolerability Based on Charge Separation States

Protonation-Induced Room-Temperature Phosphorescence In Fluorescent Polyurethane

Ultralong Room-Temperature Phosphorescence from Polycyclic Aromatic Hydrocarbons by Accelerating Intersystem Crossing within Rigid Polymer Network

Synthesis and Optical Performances of a Waterborne Polyurethane-Based Polymeric Dye

Synergetic enhancement of room-temperature phosphorescence via water molecules as a hydrogen bonding bridge

Synergetic Enhancement of Room-Temperature Phosphorescenceviawater Molecules As a Hydrogen Bonding Bridge

Converting Molecular Luminescence to Ultralong Room-Temperature Phosphorescence Via the Excited State Modulation of Sulfone-Containing Heteroaromatics.

Ph-Responsive Amorphous Room-Temperature Phosphorescence Polymer Featuring Delayed Fluorescence Based on Fluorescein

Time-dependent Color-Tunable Room Temperature Phosphorescence from Unusual Conformational Transitions in Phenothiazine Polymers under UV Irradiation

Controlling the efficient and ultralong room-temperature phosphorescence of 9H-dibenzo[a,c]carbazole derivatives for erasable light printing

Efficient intersystem crossing and tunable ultralong organic room-temperature phosphorescence via doping polyvinylpyrrolidone with polyaromatic hydrocarbons