Abstract:In order to manage the energy and improve the heating/cooling efficiency, a hybrid method with mechanism modeling and system identification is proposed to predict the energy consumption of semi-closed greenhouses. Based on the balance of energy and mass balance, a physical model for energy consumption in the semi-closed greenhouse is developed, which takes into account the energy flux due to solar radiation, long wave thermal radiation, crop transpiration, heat conduction and convection. According to the measurement difficulty and time-variation, besides the environmental parameters, 11 uncertain parameters of the model are selected such as leaf area index of crop, aerodynamic resistances of the leaves and heat transfer coefficient of greenhouse cover. Self-accelerating particle swarm optimization and genetic algorithm (SPSO-GA) is presented to adjust the uncertain parameters of the energy consumption model. To speed up the convergence, the acceleration factor is considered to change the inertia weight in the optimization process. The population is evolved by particle swarm optimization (PSO) and the local optimal particle population is retained. Then, the local worst particle population from PSO is evolved by implementing crossover and mutation genetic algorithm (GA) operators. Combining the local best particle population by PSO and the particles by GA,thebest particles are remained. The data measurement is conducted in a semi-closed greenhouse in the Chongming agricultural demonstration base (31°57′N, 121°7′E), located in Shanghai City from November 1, 2014 to May 31, 2015. SPSO-GA is utilized to calibrate the uncertain parameters of energy consumption model by using the measured data in the experimental greenhouse from March 1 to March 5, 2015. The identification results illustrate that SPSO-GA can provide the advantage of rapid convergence, global optimization and strong robustness. The root mean square error (RMSE) by the GA and the PSO at final convergence is respectively 21.3% and 12.9% higher than that by the SPSO-GA. Hence, these results indicate that the SPSO-GA is effective to adjust the uncertain parameters of greenhouse energy model with high accuracy. According to the validation by using the continual three-day data, the RMSE by the GA and the PSO is respectively 32.2% and 10.7% higher than that by the SPSO-GA. The predicted heat power consumption by the SPSO-GA in the semi-closed greenhouse is well fitted with the measured data, and the total energy consumption performs a better accuracy of 98.6%. For checking the extensive applicability of energy consumption model in the semi-closed greenhouses, the energy forecasting model is then utilized to further predict the daily energy consumption in January, 2015. The deference of predicted and measured daily energy consumption is 1.58%-27.05%; however, all the relative error between predicted and measured daily energy consumption can be less than 14% when the trend of actual outside temperature and solar radiation is similar to that set for simulation. It proves that the energy forecasting model can be reliable to estimate the energy consumption of semi-closed greenhouse. The developed model for energy consumption can act as a tool to design the cooling/heating load and manage the greenhouse energy for financial and energy savings.

Energy Consumption Analysis of the Forced-Air Cooling Process with Alternating Ventilation Mode for Fresh Horticultural Produce

Numerical Analysis of Air Supply Alternatives for Forced-Air Precooling of Agricultural Produce

Development and experimental investigation on forced-air precooling device with alternating ventilation mode

Multi-parameter analysis of air flow velocity on peach precooling efficiency using CFD

Experimental Performance Comparison and Trade‐off among Air‐based Precooling Methods for Postharvest Apples by Comprehensive Multiscale Thermodynamic Analyses

A Numerical Study on Heat and Mass Transfer Coupled with Respiration Reaction within Stacked Spherical Postharvest Produce: Spatial Distribution and Temporal Variation

Selection of a computational fluid dynamics (CFD) model and its application to greenhouse pad-fan cooling (PFC) systems

Variable air supply velocity of forced-air precooling of iceberg lettuces: Optimal cooling strategies

A review of computational fluid dynamics for forced-air cooling process

Performance Simulation and Applicability Analysis of Hybrid Air Conditioner in Cooling Season

Modeling and optimization of integrated earth air heat exchanger and direct evaporative cooling system using ANN and RSM approaches for preserving fruits and vegetables

Enhanced airflow by additional axial fans for produce cooling in a cold room: A numerical study on the trade-off between cooling performance and irreversibility

Simulation and Experimental Analysis of A Fresh Air-Handling Unit with Liquid Desiccant Sensible and Latent Heat Recovery

Impact of Ventilation Design on the Precooling Effectiveness of Horticultural Produce—a Review

Prediction on Energy Consumption of Semi-Closed Greenhouses Based on Self-Accelerating PSO-GA

Prediction Of The Energy Savings Of A System Combining Air-Conditioner'S Outdoor Unit With Hydroponic-Cultivated Roof Plant

Performance and economic efficiency analysis of an integrated, outdoor fan-ventilated cooling device

Experimental performance analysis of hybrid air conditioner in cooling season

Optimal fresh-air utilization strategy based on isocost Line: Adaptability analysis for constant temperature and humidity air-conditioning system

Simulation Analysis on the Fresh Air Handling Unit with Liquid Desiccant Total Heat Recovery

Forced-air cooling of iceberg lettuces: Cooling efficiency in relation to commercial operating strategies