Abstract:Viscosity is a physical property of fluids and shows resistance to flow. In metallurgical slag, it directly affects various parameters of a metallurgical process such as reaction rate, separation effect, etc. The estimation of viscosity by models during a production process is considered to be much more effective owing to the production fluctuations and complexities of the slag composition. Many viscosity models have been developed in the past, such as the structural model with a wide range of adaptability and complex calculation process and the empirical and semiempirical models with simple structure and a narrow range of adaptability. The present paper proposed a new method to calculate the structural parameter (NBO/T) ratio (the amount of nonbridging oxygen per tetrahedral-coordinated atom), based on which the relationship between the viscosity of molten slag and (NBO/T) ratio was investigated. First, the viscosity model was applied to SiO2–ΣMxO slags, with the model parameters obtained by fitting the viscosity data of pure oxide and SiO2–MxO binary slag, and the average deviations were in the range of 9%–18.5%. Then, the model was extended to calculate the viscosity of SiO2–Al2O3–ΣMxO, a multicomponent complex aluminosilicate system, and Al2O3 was split into acid and basic oxides. Then the oxides were used for calculating the (NBO/T) ratio and viscosity activation energy based on the amphoteric behavior of Al2O3 in SiO2–Al2O3–MxO ternary slag system. Using the parameters of a SiO2–MxO binary system, the model parameters of the Al2O3-containing slag system were obtained by fitting the viscosity data of the SiO2–Al2O3–MxO ternary slag system with average deviations between 10% and 25%. In addition, the viscosity of a multi-complex system (SiO2–Al2O3–CaO–MgO–FeO–Na2O–K2O–Li2O–BaO–SrO–MnO) and its subsystems were also calculated using the model proposed in this paper, and the average deviations is less than 25%, which shows relatively accurate prediction results. The present model is based on the analysis of a slag structure and processing of data by an empirical method. This method has a better prediction effect and wider application range compared with the traditional empirical model, and it uses a simpler calculation process compared with the structure model.

A new prediction method for the viscosity of the molten coal slag. Part 1: The effect of particle morphology on the suspension viscosity

A New Prediction Method for the Viscosity of the Molten Coal Slag. Part 2: the Viscosity Model of Crystalline Slag

Rheology and Viscosity Prediction of Bituminous Coal Slag in Reducing

A Novel Structural Viscosity Model for Coal Slag Melts

A prediction method of slagging behavior for pulverized coal by using test method of sedimendation furnace

Model of estimating viscosity based on slag structure in entrained flow gasifier

Computational Modeling and Prediction on Viscosity of Slags by Big Data Mining

Structurally-based Viscosity Model for Multicomponent Slag Systems

A modified method for calculating the viscosity of multicomponent slags based on Kriging interpolation

A structural viscosity model for silicate slag melts based on MD simulation

Experimental Research and Prediction Model on Viscosity of High FeO Content Slag

Viscosity experiments of slag-spinel suspensions: The effect of volume fraction, particle size, and shear rate

A Novel Kinematic Model for Molten Slag Fiberization: Prediction of Slag Fiber Properties

Modeling Viscosity of High Titania Slag

Quantitative Study of Si Structural Units in Coal Slags and Its Influence on Viscosity

Viscosity measurement and prediction model of molten iron

A modified prediction model for viscosity of nanofluids based on molecular dynamics simulation

Development of Structure-Informed Artificial Neural Network for Accurately Modeling Viscosity of Multicomponent Molten Slags

A critical review of ash slagging mechanisms and viscosity measurement for low-rank coal and bio-slags

Modeling the slag flow and heat transfer with the effect of fluid-solid slag layer interface viscosity in an entrained flow gasifier

Viscosity of Cohesive Sediment‐Laden Flows: Experimental and Empirical Methods