Abstract:Polyvinylidene fluoride is an excellent membrane separation material, but its hydrophilicity is weak, which makes the membrane susceptible to contamination during use. In this study, a novel composite nanomaterial was prepared to improve the hydrophilicity of the polyvinylidene fluoride membrane, so that it can efficiently separate the oil–water emulsion. The nanophase material crystal structure was studied by X-ray diffraction, and the Fourier transform infrared spectroscopy revealed polar moieties (–OH, –NH2) on the membrane surface. The results show that the hydrophilic nanomaterials have been successfully prepared. The membrane surface morphology and the pore structure were analyzed by scanning electron microscopy and atomic force microscopy. It can be observed that the surface of the modified membrane is more orderly than the original polyvinylidene fluoride membrane. The polyvinylidene fluoride composite membrane’s pure water flux was investigated by using a cup ultrafiltration device to characterize the permeability. The pure water contact angle was measured by a contact angle meter to characterize the membrane’s hydrophilicity. The results show that the modified membrane has good hydrophilicity compared with the original polyvinylidene fluoride membrane. In addition, the oil–water separation performance was studied using four different types of oil/water emulsions. The experimental results showed that the membrane had a good performance in separating the emulsified oils with a highest oil removal rate of 97.2%. At the same time, the polyvinylidene fluoride membrane had good anti-fouling performance. After three pollution/washing cycles, the flux recovery rate still reached 84.6%. Under the long-term testing conditions, the performance of the membrane was relatively stable.

Improvement in Antifouling and Separation Performance of PVDF Hybrid Membrane by Incorporation of Room‐temperature Ionic Liquids Grafted Halloysite Nanotubes for Oil–water Separation

High-flux Underwater Superoleophobic Hybrid Membranes for Effective Oil–water Separation from Oil-Contaminated Water

Preparation of a Novel Poly(vinylidene Fluoride) Ultrafiltration Membrane by Incorporation of 3-Aminopropyltriethoxysilane-grafted Halloysite Nanotubes for Oil/Water Separation

Fabrication of Ph-Sensitive Superhydrophilic/Underwater Superoleophobic Poly(vinylidene Fluoride)-Graft-(sio2 Nanoparticles and PAMAM Dendrimers) Membranes for Oil-Water Separation.

A Modified, Mussel-Inspired Method to Fabricate Polyvinylidene Fluoride Membranes Filled with Halloysite Nanotubes Modified with Dopamine, Iron Oxide, and Silane for Oil–water Separation

Facile Preparation of Halloysite Nanotube-Modified Polyvinylidene Fluoride Composite Membranes for Highly Efficient Oil/water Emulsion Separation

Hydrophilic modification of PVDF membranes for oily water separation with enhanced anti-fouling performance

Biomimetic hydrophilic modification of poly (vinylidene fluoride) membrane for efficient oil-in-water emulsions separation

Novel Hydrophilic PVDF Ultrafiltration Membranes Based on a ZrO 2 –multiwalled Carbon Nanotube Hybrid for Oil/water Separation

Hydrophilic modification of <scp>PVDF</scp> membranes for oily water separation with enhanced anti‐fouling performance

Surface modification of PVDF membrane via deposition-grafting of UiO-66-NH 2 and their application in oily water separations

Bio-inspired Method for Preparation of Multiwall Carbon Nanotubes Decorated Superhydrophilic Poly(vinylidene Fluoride) Membrane for Oil/water Emulsion Separation

Antifouling polyamide-amine /PVDF gel membrane via click chemistry method for high-efficiency oil/water emulsion separation

Modification of Poly(vinylidene Fluoride) Membranes with Aluminum Oxide Nanowires and Graphene Oxide Nanosheets for Oil–water Separation

Preparation of Halloysite-Based PVDF Membrane for Effective Oil/water Separation and Dyes Removal

High-Flux Nanofibrous Membranes with an Under-oil Superhydrophobic Surface Modulated by Zeolitic Imidazolate Framework-71 for Gravity-Driven Water-in-Oil Separation

Significantly enhanced antifouling and separation capabilities of PVDF membrane by synergy of semi-interpenetrating polymer and TiO<sub>2</sub> gel nanoparticles

One-step modification of electrospun PVDF nanofiber membranes for effective separation of oil-water emulsion

Efficient Separation of Oil‐in‐water Emulsion Based on a Superhydrophilic and Underwater Superoleophobic Polyvinylidene Fluoride Membrane

Interfacial coordination mediated surface segregation of halloysite nanotubes to construct a high-flux antifouling membrane for oil-water emulsion separation

Fabrication of Superhydrophobic Electrospun Polyimide Nanofibers Modified with Polydopamine and Polytetrafluoroethylene Nanoparticles for Oil–water Separation