Abstract:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Ahead of Print. Fused Deposition Modeling (FDM) has emerged as a cost-effective and user-friendly technique that has garnered significant attention in recent years. However, challenges persist when printing soft materials using FDM technology. This study proposes a solution by blending a soft polyolefin elastomer (POE) with a stiffer material, acrylonitrile butadiene styrene (ABS). A comprehensive experimental investigation utilizing a direct pellet printing method was conducted to 3D print POE-ABS blends in various ratios (10%, 30%, and 50% ABS content). The study encompassed material preparation, 3D printing, SEM (Scanning Electron Microscopy) analysis, Dynamic Mechanical Thermal Analysis (DMTA), uniaxial tensile testing, and compression testing to assess the mechanical properties and energy absorption capabilities of the 3D printed blends. The results of the DMTA showed that the blends with a higher amount of ABS have a larger area under the Tan δ curve, indicating their ability to absorb more energy. The SEM images revealed that as the proportion of ABS increases, the gaps between layers and beads become smaller. The mechanical properties of the pure printed POE, such as its elongation at break and tensile strength, were 2138% and 2.83 MPa, respectively. However, as the ABS content increased, the samples exhibited more rigid behavior, with a final transition to 50/50 ratio resulting in 9.4 MPa tensile strength and 160% elongation at break. The energy absorption test demonstrated that the sample with 30% ABS content has the highest energy absorption capability among all the tested samples. This research underscores the potential of blending soft and stiff materials to tailor properties for additive manufacturing applications, emphasizing the significance of material composition in achieving desired mechanical performance, printability, and functionality in printed objects.

3D-Printable ABS Blends with Improved Scratch Resistance and Balanced Mechanical Performance

Mechanical, thermal, and microstructure analysis of 3D printed polyolefin elastomer-acrylonitrile butadiene styrene blends for tunable mechanical properties

Mechanical Properties and Performance of 3D-Printed Acrylonitrile Butadiene Styrene Reinforced with Carbon, Glass and Basalt Short Fibers

Three-dimensional printing with waste acrylonitrile butadiene styrene: Processing and characterization

Effects of SBS on Properties of 3D Printing ABS

Preparation and Properties of Scratch Resistance and High Surface Gloss ABS/PMMA Alloy

Selective Laser Sintering of Acrylonitrile Butadiene Styrene Polymer and Post-Processing Enhancement: an Experimental Study

Effect of Nanoparticles on the Mechanical Properties of Acrylonitrile–butadiene–styrene Specimens Fabricated by Fused Deposition Modeling

Mechanical Reinforcement of ABS with Optimized Nano Titanium Nitride Content for Material Extrusion 3D Printing

Development of a laser‐assisted fused deposition modeling process for improvement in bond tensile strength of ABS

Compatibility and Thermal Properties of Poly(acrylonitrile–butadiene–styrene) Copolymer Blends with Poly(methyl Methacrylate) and Poly(styrene‐co‐acrylonitrile)

Improving 3D printability and interlayer adhesion in ABS/PP immiscible polymer blends

Assessment of Physio-Mechanical characteristics of ABS/PETG blended parts fabricated by Material Extrusion 3D printing

Modification of the Grafting Character to Prepare PA6/ABS-g-MA Blends with Higher Toughness and Stiffness

Preparation and Characterization of Poly(butylene Succinate)/polylactide Blends for Fused Deposition Modeling 3D Printing

Structure and Mechanical Behavior of Additive Manufactured Fused Deposition Modeling ABS

Effect of Inorganic Fillers on Mechanical Properties of FDM 3D Printed ABS Specimens

Short Fiber Reinforced Composites for Fused Deposition Modeling

Effect of Fused Filament Fabrication Parameters and Tetrabromobisphenol-A/Microcrystalline Cellulose Additives on the Dynamic Mechanical Behavior of Polycarbonate/Acrylonitrile–Butadiene–Styrene Blends for Precision Structures

Synthesis and Investigation of Mechanical Properties of the Acrylonitrile Butadiene Styrene Fiber Composites Using Fused Deposition Modeling

Izod Impact Strength of Acrylonitrile Butadiene Styrene (ABS) Matetials after Used in UP2! 3D-Printer