Abstract:Energy and mass transfer in photocatalytic systems plays a significant role in photocatalytic water splitting, but relevant research has long been ignored. Here, an interfacial photocatalytic mode for photocatalytic hydrogen production is exploited to optimize the energy and mass flows and mainly includes a heat-insulating layer, a water-channel layer, and a photothermal photocatalytic layer. In this mode, the energy flow is optimized for efficient spreading, conversion, and utilization. A low-loss path (ultrathin water film) and an efficient heat localized zone are constructed, where light energy, especially infrared-light energy, can transfer to the target functional membrane surface with low loss and the thermal energy converted from light can be localized for further use. Meanwhile, the optimization of the mass flow is achieved by improving the desorption capacity of the products. The generated hydrogen bubbles can rapidly leave from the surface of the photocatalyst, along with the active sites being released timely. Consequently, the photocatalytic hydrogen production rate can be increased up to about 6.6 times that in a conventional photocatalytic mode. From the system design aspect, this work provides an efficient strategy to improve the performance of photocatalytic water splitting by optimizing the energy and mass flows.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c01108?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c01108</a>.Theoretical calculation and analysis, photos, EDS spectrum, transmission spectrum, other curves of hydrogen evolution, SEM images, XRD patterns, absorption spectra, and curves of temperature changes (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01108/suppl_file/am1c01108_si_001.pdf">PDF</a>)Video S1. Bubbles growing on the membrane sample submerged in water 10 mm below the surface (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01108/suppl_file/am1c01108_si_002.mp4">MP4</a>)Video S2. Bubbles growing on the membrane sample submerged in water 5 mm below the surface (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01108/suppl_file/am1c01108_si_003.mp4">MP4</a>)Video S3. Bubbles growing on the membrane sample submerged in water 2 mm below the surface (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01108/suppl_file/am1c01108_si_004.mp4">MP4</a>)Video S4. Bubbles growing on the membrane sample but taking only little pressure from water (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01108/suppl_file/am1c01108_si_005.mp4">MP4</a>)Video S5. Hydrogen bubbles sticking on the photocatalytic membrane when the photocatalytic reaction is being carried out (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01108/suppl_file/am1c01108_si_006.mp4">MP4</a>)This article has not yet been cited by other publications.

Experimental Study on Direct Solar Photocatalytic Water Splitting for Hydrogen Production Using Surface Uniform Concentrators

Experimental study of direct solar photocatalytic water splitting for hydrogen production under natural circulation conditions

EXPERIMENTAL STUDY ON THE EFFECTS OF LIGHT INTENSITY ON ENERGY CONVERSION EFFICIENCY OF PHOTO-THERMO CHEMICAL SYNERGETIC CATALYTIC WATER SPLITTING

Enhancement of Solar-to-hydrogen Conversion Efficiency in Water Splitting by Optimizing Morphology of Cu2O Nanostructure and Surface Modification

Direct Solar Photocatalytic Hydrogen Generation with CPC Photoreactors: System Development

Development of the Direct Solar Photocatalytic Water Splitting System for Hydrogen Production in Northwest China: Design and Evaluation of Photoreactor

Solar Concentrator with Uniform Irradiance for Particulate Photocatalytic Hydrogen Production System

Efficient Solar Hydrogen Production by Photocatalytic Water Splitting: from Fundamental Study to Pilot Demonstration

Metal-Free Catalyst with Large Carbon Defects for Efficient Direct Overall Water Splitting in Air at Room Pressure

Study on Photocatalytic Hydrogen Production in Simulated Organic Pollutants over Cadmium Sulfide Composite Photocatalyst

Computational Fluid Dynamics Modeling of Reactive Multiphase Flow for Suspended Photocatalytic Water Splitting of Hydrogen Production System

Tailoring the Surface and Interface Structures of Photocatalysts to Enhance Hydrogen Production

Photocatalytic hydrogen production under direct solar light in a CPC based solar reactor: Reactor design and preliminary results

Interfacial Design to Enhance Photocatalytic Hydrogen Evolution via Optimizing Energy and Mass Flows

Boosting photothermal-assisted photocatalytic water/seawater splitting into hydrogen based on greenhouse-induced photothermal effect

Visible-light-driven photocatalytic water splitting on nanostructured semiconducting materials

Photothermally Driven Decoupling of Gas Evolution at the Solid-Liquid Interface for Boosted Photocatalytic Hydrogen Production.

Experimental investigation on parameter optimization of liquid spectral beam splitter for continuous photocatalytic hydrogen production accompanied with photovoltaic power generation under solar full spectrum

A p-n-p Configuration Based on the Cuprous Oxide/Silicon Tandem Photocathode for Accelerating Solar-Driven Hydrogen Evolution

Activating Surface Sulfur Atoms Via Subsurface Engineering Toward Boosted Photocatalytic Water Splitting

A Numerical Case Study of Particle Flow and Solar Radiation Transfer in a Compound Parabolic Concentrator (CPC) Photocatalytic Reactor for Hydrogen Production