Abstract:This paper presents a progressive numerical model validation of a bowstring-arch railway bridge based on the analysis of experimental data from different structural response measurements, namely, static deformations under environmental actions, modal vibrations, and transient dynamic responses under traffic loads. This work also addresses an integrated approach that uses structural health monitoring (SHM) measurements in combination with FE modelling to understand the structural behaviour of a long-span complex bridge. A progressively phased in situ SHM system has provided a diverse set of data streams ranging from static and dynamic responses to the measurement of environmental and operational traffic loads. The first phase consists of defining a detailed baseline finite-element (FE) model of the bridge, envisaging the initial condition of the structure immediately after construction, and its validation using modal parameters (natural frequencies and mode shapes) derived from an ambient vibration test. Since overall in-service deflections in general do not exercise the non-linear regime of the bridge response, the second phase focuses on the analysis of static response data and temperature measurements to validate the non-linear behaviour of the structural system, particularly at the bearing devices, under slow actions. The third and final phase addresses the dynamic analysis under traffic actions, which provides greater sensitivity in the detection of non-linear behaviour due to the effects of high-amplitude actions induced by regular train loading profiles. To guarantee the accuracy of the baseline numerical model, particularly under temperature and traffic actions, it was necessary to use contact restrictions in some specific bearing devices. This improvement is in line with the structural changes detected in some bearing devices through visual inspections. As a result, an updated numerical model capable of reproducing the modal, static, and dynamic structural responses was achieved, showing a very good agreement between experimental and numerical data. In future applications, this updated numerical model will be useful for assessing the condition of the bridge under traffic loads, namely to identify damages and support the adoption of life cycle maintenance strategies based on the integration of SHM systems with (stochastic) load and failure models.

Performance Monitoring of an Existing Concrete Bridge using Strain Measurement Data

Dynamic Monitoring and Data Analysis of a Long-Span Arch Bridge Based on High-Rate GNSS-RTK Measurement Combining CF-CEEMD Method

Strain-Based Structural Condition Assessment of an Instrumented Arch Bridge Using Fbg Monitoring Data

Bridge Health Monitoring Using Strain Data and High-Fidelity Finite Element Analysis

Kalman Filter Based Estimation of Neutral Axis Position of Bridge Deck under Traffic Loading

Research on Mapping Relationship Between Environmental Load and Vibration Response of Bridge Structure Based on Structural Health Monitoring Data

Operational modal analysis and finite element model updating of ultra-high-performance concrete bridge based on ambient vibration test

Structural Health Monitoring Design and Performance Evaluation of a Middle-Span Bridge

Comparative study on sensitivity of acceleration and strain responses for bridge health monitoring

Using Drive-by Health Monitoring to Detect Bridge Damage Considering Environmental and Operational Effects

Effectiveness of Drive‐By Monitoring in Short‐Span Bridges: A Real‐Scale Experimental Evaluation

Long-term Bridge Health Monitoring and Performance Assessment Based on a Bayesian Approach

Using limited roving sensors to monitor bridge subjected to random traffic load

A strain sensor based monitoring and damage detection system for a two-span beam bridge

Structural Performance Monitoring of an Urban Footbridge

Methodology of Long-Term Real-Time Condition Assessment for Existing Cable-Stayed Bridges

Performance monitoring and diagnosis of bridge structures based on time multiscale divide and conquer strategy

Health monitoring of steel box girder bridges using non-contact sensors

Progressive numerical model validation of a bowstring-arch railway bridge based on a structural health monitoring system

HEALTH-MONITORING METHOD FOR BRIDGES UNDER ORDINARY TRAFFIC LOADINGS

Vibration-based structural health monitoring from operational long- gauge fiber optic strain data