Abstract:AlCoCrFeNiTi high-entropy alloys (HEAs) have attracted much attention because of their excellent mechanical properties. Here, we systemically studied the effects of elements on the microstructure and mechanical properties of AlCoCrFeNiTi HEAs. The results showed that the phase composition and morphology are significantly affected by the elements. With increasing Ti addition, the lattice parameters of the solid solution phase increased slightly, and lattice distortion occurred. Al changes the crystal structure of FCC to BCC and reduces the lattice distortion energy of the alloy. The BCC phase obviously increases with increasing Al content. However, excessive Al, Ti and Cr promote the formation of intermetallic compound phases, while Ni, Fe and Co promote the transformation of the alloy into a solid solution. The properties of AlCoCrFeNiTi HEAs are closely related to their phase composition and morphology. When HEAs consist only of FCC and BCC phases, their ductility and strength are greatly improved. The presence of an intermetallic compound phase in the microstructure can significantly reduce the configurational entropy of adjacent solid solutions, thus reducing the strengthening effect of solid solutions. Additionally, the AlCoCrFeNiTi HEAs with different microstructures show different deformation mechanisms. The deformation of FCC + BCC HEAs with cellular structures is uniform and presents great plasticity and strength. When the cellular-structure HEAs contain equiaxed BCC, thick lamellar BCC/FCC or intermetallic compound phases, cracks tend to occur and propagate along the phase boundary due to the local nonuniform deformation. For AlCoCrFeNiTi HEAs with dendrite structures, after initiation at the phase boundary, the crack does not easily spread to the dendrite FCC phase but causes the interdendritic BCC phase to crack.

Effect of Alloying Elements on Microstructure, Mechanical and Damping Properties of Cr-Mn-Fe-V-Cu High-Entropy Alloys

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

Effect of element V on the as-cast microstructure and mechanical properties of Al0.4Co0.5VxFeNi high entropy alloys

Effects of Cu addition on the microstructure and mechanical properties of AlFeCrCoTiCu x high-entropy alloys

Impact of Cu Content on Microstructural Evolution and Mechanical Behavior of CoCrMo0.5TiVCux High-Entropy Alloys

Microstructural Evolution and Strengthening Mechanisms in CrxMnFeNi High-Entropy Alloy

Microstructure and Mechanical Properties of Face‐Centered‐Cubic‐Based Cr‐Free Equiatomic High‐Entropy Alloys

Effect of Cr Content on Microstructure, Mechanical, and Corrosion Properties of CoCr X FeMnNi High-Entropy Alloys Fabricated by Selective Laser Melting

Cu alloying enables superior strength-ductility combination and high corrosion resistance of FeMnCoCr high entropy alloy

Effect of Alloying on Microstructure and Mechanical Properties of AlCoCrFeNi2.1 Eutectic High-Entropy Alloy

Microstructure, Mechanical Properties, and Damping Capacity of AlxCoCrFeNi High-Entropy Alloys Prepared by Spark Plasma Sintering

Effect of Mo Content on Microstructure and Mechanical Properties of CoCrFeNi Series High-entropy Alloys

Effect of Al Addition on Microstructures and Mechanical Properties of AlxCrFeNi2.5Mo High Entropy Alloys

Mechanical properties and fracture mechanism of as-cast MnFeCoCuNi high-entropy alloys

Influence of V and Al in Enhancing the Strength and Ductility of Co-rich High-Entropy Alloys

Improving Mechanical Properties of Co-Cr-Fe-Ni High Entropy Alloy via C and Mo Microalloying

Effects of Elements on the Microstructure and Mechanical Properties of AlCoCrFeNiTi High-Entropy Alloys

Effects of Mn addition on mechanical properties, fracture surface, and electrochemical corrosion resistance of CoCrFeNiAl high-entropy alloys

Microstructure, Mechanical and Corrosion Properties of Co- and Cu-free AlxCrFeNi2.5Mo1-x High Entropy Alloys

Composition Design of High Entropy Alloys Using the Valence Electron Concentration to Balance Strength and Ductility

Effect of Al Elements on the Microstructure and Properties of CoCrNiCuMoAlx High-Entropy Alloys