Effects of Cr/Fe Ratio on Structural Evolution and Tensile Properties of the Fe75.7−xCrxNi15.1Al4.6Ti4.6 High‐Entropy Alloys
Yu Ji,Long Zhang,Xing Lu,Jingyu Pang,Yunzhuo Lu,Zhengwang Zhu,Huameng Fu,Hongwei Zhang,Hong Li,Haifeng Zhang
DOI: https://doi.org/10.1002/adem.202200115
IF: 3.6
2022-05-08
Advanced Engineering Materials
Abstract:As Cr/Fe ratio increases in Fe75.7−xCrxNi15.1Al4.6Ti4.6 (in molar ratio, x = 17.1–25.3) high‐entropy alloys (HEAs), the tensile strength rises sharply and the plasticity decreases rapidly. Specifically, Fe56.8Cr18.9Ni15.1Al4.6Ti4.6 exhibits a good combination of the strength (1142 MPa) and the elongation (9.5%). In the designed HEAs, second‐phase strengthening is the dominate mechanism. According to the effect of valence electron concentration (VEC) on the phase evolution of high‐entropy alloys (HEAs), Fe75.7−xCrxNi15.1Al4.6Ti4.6 (at%, x = 17.1, 18.9, 20.6, 22.3, and 25.3) HEAs are designed. Effects of the Cr addition on the microstructure and tensile properties are investigated systemically. As the Cr/Fe ratio increases (i.e., decreasing VEC), there is a phase transition from face‐centered‐cubic (FCC) to body‐centered‐cubic (BCC) and Heusler‐type β′ ‐Ni2TiAl (L21). When x is between 17.1 and 22.3, the alloys, with the mixed structure of the FCC and BCC/L21 phases, behave like composites with a sharp increase in strength but reduced ductility. When x = 25.3, the alloy, with only BCC/L21 phases, becomes extremely brittle. Specifically, Fe56.8Cr18.9Ni15.1Al4.6Ti4.6 exhibits a good combination of a high strength of 1142 MPa and an elongation strain of 9.5%. The excellent tensile properties of this alloy are attributed to the synergetic effects of a soft FCC phase, a hard BCC phase, and the uniform distribution of high‐density L21 nanoparticles in BCC matrix. The phase‐evolution principle is delineated by parameters of the VEC and the atomic size difference (δ), and the strengthening mechanism is well discussed. These findings offer a guidance for the development of BCC/L21‐containing HEAs for practical applications.
materials science, multidisciplinary