Abstract:Bismuth telluride-based alloys are the best performing thermoelectric materials near room temperature. Grain size refinement and nanostructuring are the core stratagems for improving thermoelectric and mechanical properties. However, the donor-like effect induced by grain size refinement strongly restricts the thermoelectric properties especially in the vicinity of room temperature. In this study, the formation mechanism for the donor-like effect in Bi2Te3-based compounds was revealed by synthesizing five batches of polycrystalline samples. We demonstrate that the donor-like effect in Bi2Te3-based compounds is strongly related to the vacancy defects (VBi‴ and VTe···) induced by the fracturing process and oxygen in air for the first time. The oxygen-induced donor-like effect dramatically increases the carrier concentration from 2.5 × 1019 cm-3 for the zone melting ingot and bulks sintered with powders ground under an inert atmosphere to 7.5 × 1019 cm-3, which is largely beyond the optimum carrier concentration and seriously deteriorates the thermoelectric performance. Moreover, it is found that both avoiding exposure to air and eliminating the thermal vacancy defects (VBi‴ and VTe···) via heat treatment before exposure to air can effectively remove the donor-like effect, producing almost the same carrier concentration and Seebeck coefficient as those of the zone melting ingot for these samples. Therefore, a defect equation of oxygen-induced donor-like effect was proposed and was further explicitly corroborated by positron annihilation measurement. With the removal of donor-like effect and improved texturing via multiple hot deformation (HD) processes, a maximum power factor of 3.5 mW m-1 K-2 and a reproducible maximum ZT value of 1.01 near room temperature are achieved. This newly proposed defect equation of the oxygen-induced donor-like effect will provide a guideline for developing higher-performance V2VI3 polycrystalline materials for near-room-temperature applications.

Mechanical Properties in Thermoelectric Oxides: Ideal Strength, Deformation Mechanism, and Fracture Toughness

Oxide semiconductors for thermoelectric: The challenges and future

High Performance Oxides-Based Thermoelectric Materials

Mechanical and Electronic Properties of CeO 2 under Uniaxial Tensile Loading: A DFT Study

High-performance near-room-temperature n-type Bi2Te3-based thermoelectric alloys with superior mechanical properties

Enhancing the Thermoelectric and Mechanical Properties of Bi 0.5 Sb 1.5 Te 3 Modulated by the Texture and Dense Dislocation Networks

Thermal Transport and Mechanical Properties of Layered Oxychalcogenides LaCuOX (X = S, Se, and Te)

First-principles Modelling of SrTiO3 based Oxides for Thermoelectric Applications

Stable cubic crystal structure and optimized thermoelectric performance of SrTiO3 based ceramics driven by entropy engineering

Biaxial Tensile Strain-Induced Enhancement of Thermoelectric Efficiency of α-Phase Se2Te and SeTe2 Monolayers

Removing the Oxygen-Induced Donor-like Effect for High Thermoelectric Performance in n-Type Bi 2 Te 3 -Based Compounds

The use of strain to tailor electronic thermoelectric transport properties: A first principles study of 2H-phase CuAlO2

Metal oxides for thermoelectric power generation and beyond

Ca4Sb2O and Ca4Bi2O: two promising mixed-anion thermoelectrics

Improving the mechanical properties of Bi2Te3‐based thermoelectric materials by K2Ti6O13 whisker

Enhanced Interfacial Reliability and Mechanical Strength of CoSb3-Based Thermoelectric Joints with Rationally Designed Diffusion Barrier Materials of Ti-Based Alloys

Modulation of Vacancy Defects and Texture for High Performance N-Type Bi2 Te3 Via High Energy Refinement.

Research Progress of Oxides Thermoelectric Materials

High-Temperature Mechanical and Thermoelectric Properties of p-Type Bi0.5Sb1.5Te3 Commercial Zone Melting Ingots

Tuning Multiscale Microstructures to Enhance Thermoelectric Performance of N‐type Bismuth‐Telluride‐Based Solid Solutions

Gibbs Adsorption and Zener Pinning Enable Mechanically Robust High‐Performance Bi2Te3‐Based Thermoelectric Devices