Abstract:Summary form only given. Permanent magnet (PM) machines have been widely employed in electric vehicles, wind power generators, domestic appliances, and industrial servos etc. When the rotor is eccentric, either static or dynamic due to manufacturing or operating tolerances, the full machine model is necessary for finite element analysis (FEA), because the model cannot be simplified by utilizing the periodicity any more. This is problematic and time-consuming for FEA especially when the slot number and pole number are high, such as in direct-drive low-speed PM machines. This paper proposes a new analytical model which combines the superposition method and the subdomain method [1] for predicting air-gap field in PM machines with rotor eccentricity. A 12-slot/10-pole surface-mounted PM machine is taken as example to illustrate the developed method. The original machine with rotor eccentricity, Fig.1(a), is divided into a number of air-gap sections along the circumference. For each air-gap section, an equivalent air-gap length is determined, corresponding to the center point of the slot opening in this example. Then, the subdomain method is employed for each of concentric models with different equivalent air-gap lengths to analytically synthesize the air-gap field in the original eccentric machine. By way of example, Figs.1(b), (c) and (d) show 3 concentric models according to the three selected air-gap lengths shown in Fig.1(a) respectively. It is worth noting that the whole synthesis process can be carried out analytically and integrated into the CAD software. The open-circuit air-gap flux densities and back-EMFs obtained by the proposed superposition method is shown in Fig.2 and validated by the direct FEA for a specific rotor eccentricity. The results clearly show that 3 phase back-EMFs are unbalanced due to rotor eccentricity. Therefore, it has demonstrated that the proposed method can accurately predict the air-gap field in PM machines with rotor eccentricity and can be used to predict the electromagnetic performance. The details of analytical method and application to a very high slot and pole number PM machine will be given in the full paper .

Analytical Calculation of No-Load Magnetic Field of External Rotor Permanent Magnet Brushless Direct Current Motor Used As In-Wheel Motor of Electric Vehicle

Analytical Calculation and Parameter Analysis of Air-Gap Magnetic Field Distribution in Permanent Magnet Synchronous Motor With Partition-Between-Poles Halbach Magnet

Analytical Synthesis of Air-Gap Field in Permanent Magnet Machines with Rotor Eccentricity by Superposition Method

Field-circuit Coupled Design and Analysis for Permanent Magnet Synchronous Motor System Used in Electric Vehicles

Solution of Permanent Magnet Synchronous Motors with Partition between Poles Halbach Magnet

Analytical Model for Armature Reaction of Outer Rotor Brushless Permanent Magnet DC Motor

Nonlinear Analytical Analysis of External Rotor Permanent Magnet Synchronous Motor

Effects of static eccentricity on the no-load back electromotive force of external rotor permanent magnet brushless DC motor used as in-wheel motor

Magnetic Field Analysis Using an Analytical Method in a Radial Magnetic Bearing

Magnetic Field Analysis of an Inner-Mounted Permanent Magnet Synchronous Motor for New Energy Vehicles

Analytical Solution to Magnetic Field Distribution of A Parallel Magnetised Rotor with Cylindrical or Ring-Type Permanent Magnet

Design and Analysis of Outer Rotor Permanent-Magnet Vernier Machines with Overhang Structure for In-Wheel Direct-Drive Application

Analytical Modeling of High-Torque-Density Spoke-Type Permanent Magnet In-Wheel Motor Accounting for Rotor Slot and Eccentric Magnetic Pole

Design and Analysis of a Linear-Rotary Permanent Magnet Motor with Orthogonal Windings

Characteristic Analysis and Direct Measurement for Air Gap Magnetic Field of External Rotor Permanent Magnet Synchronous Motors in Electric Vehicles

Analytical Calculation of Eccentric Surface-Mounted Permanent-Magnet Motor Accounting for Iron Saturation

Analytical modelling of air‐gap magnetic field of interior permanent magnet synchronous motors

Analytical Calculation of Stray Magnetic Field in Interior Permanent Magnet Synchronous Motor under Static Eccentricity Considering Nonlinear and Non-uniform Magnetic Saturation

Analytical Investigation Of The Magnetic-Field Distribution In An Axial Magnetic-Field-Modulated Brushless Double-Rotor Machine

Open-Circuit Air-Gap Magnetic Field Calculation of Interior Permanent Magnet Synchronous Motor With V-Shaped Segmented Skewed Poles Using Hybrid Analytical Method

Analysis and Calculation of Radial Electromagnetic Force of Circular Winding Brushless DC Motor