Experimental study on instability failure of rock mass with rough joints under one-side constraint compression
Yang Peng,Yongtao Gao,Yongsheng Xie,Yu Zhou,Tianhua Wu,Weiwei Shi,Jialin Dong
DOI: https://doi.org/10.1016/j.tafmec.2023.103907
IF: 4.374
2023-04-24
Theoretical and Applied Fracture Mechanics
Abstract:The development of rough joints parallel to the free surface in the surrounding rock will lead to instability and failure of the surrounding rock, and the occurrence of rockburst, plate cracking, and other disasters. This paper used a custom-made mold, 3D-printing technology, acoustic emission (AE) equipment, and digital image correlation (DIC) to systematically analyze the fracture characteristics and instability process of rock sample with different roughness joints under one-side constraint compression. The results showed that, in the same sample group, the peak stress gradually increases with the increase in the distance between the joint and the free surface, and that the peak stress and strain at the same distance of the joint will decrease first and then increase as the roughness increases. The energy storage limit of the sample with joints 10 mm away from the free surface was greater than that for 5 mm, the energy dissipation ratio before the peak strength of specimens decreases as the roughness increases. The smooth-jointed specimens have higher resistance to deformation under one-side constraint compression, and the failure pattern of that specimen can be tensile type. However, as roughness increases, shear cracks gradually appear along the joint convex position, and the damage degree will be increased. The closer the joint is to the free surface, the more broken the specimen will be. The AE events within the same sample group increased with the increase in the distance between the joint and the free surface, and the cumulative AE counts increased with the increase in roughness when the joint space position was the same.
engineering, mechanical,mechanics