Abstract:Vertical cavity surface emitting lasers (VCSELs) are widely used in the field of short-range optical communication and optical interconnection because of their advantages such as low threshold current, large modulation bandwidth, easy two-dimensional integration, easy coupling with optical fibers and low cost. The VCSELs and heterojunction bipolar transistor (HBT) are longitudinal current devices, so they can be well integrated on the same wafer, and the output light power can be modulated by the HBT base current. Integration of VCSELs and HBT are designed in this paper. The VCSELs and PNP InGaP/GaAs HBT form a direct series structure. The reflectivity of DBR is 99.72% at a resonant wavelength of 850 nm and 99.57% after adding HBT separately. Therefore, the addition of HBT has little influence on the reflectivity of DBR at the resonant wavelength. The electro-optical characteristics of the integrated structure are simulated by using PICS3D software. An interim collector is added into the model in order to ensure that the simulation can be carried out smoothly. Firstly, HBT is conducted and the current flows from the emitter to the interim collector. Then, the voltage across the interim collector and the N-type electrode is increased to make VCSELs conducted and the current of the transition collector drop to zero. The interim collector can be removed from the actual structure because the current is zero. The simulation results show that the current gain coefficient is 400, and the maximum modulation rate of the base current to the output light power rises up to 280 mW/mA. The maximum temperature in the active region increases with the base current increasing, and the output light power first increases and then tends to be saturated. The ac optical gain characteristics of the integrated structure is simulated by PICS3D, and the simulation result shows that cutoff frequency exceeds 1 GHz. The addition of HBT limits the modulation rate of the integrated structure, and further optimization of HBT structure parameters and geometric dimension are needed to improve the modulation rate. The integrated structure and simulation method established in this paper can also be used to integrate LED, LD, DFB or other luminescent devices with HBT.

Performance Investigation of VCSEL-Based Voltage Probe and Its Applications to HPEM Effects Diagnosis of Embedded Systems

VCSEL-Based In-Circuit Status-Monitoring and Effects-Diagnosis Method for HPEM Susceptibility Test on Digital Electronic Equipment

A Low-Cost High-Performance Voltage Sensing Circuit with Proactive Parameter Design Compensation Network for SiC MOSFETs.

Application-Oriented Investigation of Parasitic Limitation on Multilevel Modulation of High-Speed VCSELs

Electrical Probing Test for Characterizing Wideband Optical Transceiving Devices with Self-Reference and On-Chip Capability

An Electrooptothermal-Coupled Circuit-Level Model for VCSELs under Pulsed Condition

Novel Semiconductor Lasers and Integrated Photonic Devices

Design and Simulation of Integration of Vertical Cavity Surface Emitting Lasers and Heterojunction Bipolar Transistor

Extraction and Analysis of High-Frequency Response and Impedance of 980-Nm VCSELs As a Function of Temperature and Oxide Aperture Diameter

The Design and Fabrication of High Efficiency Low Beam Divergence 850 nm VCSELs for High Capacity Optical Transmission

Effect of Package on Luminescence Characteristics of High-Power VCSEL with Narrow Pulse

Electrical and physical failure analysis techniques for oxide aperture delineation in high-power oxide-confined VCSEL arrays

High-power 910 Nm Vertical-Cavity Surface-Emitting Laser Arrays for Light Detection and Ranging

High-speed 850 nm Vertical-cavity Surface-emitting Lasers with Multilayer Oxide Aperture

Power Scaling And Beam Divergence Compression Of Bottom-Emitting Vertical-Cavity Surface-Emitting Lasers

Optical Probing Of Electric Fields With An Electro-Acoustic Effect Toward Integrated Circuit Diagnosis

Mechanically tunable organic vertical-cavity surface emitting lasers (VCSELs) for highly sensitive stress probing in dual-modes.

A Compact DC-200MHz Hybrid Current Measurement Approach for Fast Switching Power Semiconductor Modules

VCSEL Line-Beam Module for LiDAR Applications

Design and Fabrication of A Micromachined Bilayer Cantilever Probe Card

A HIGH-PRECISION ULTRA-LOW-POWER HYSTERETIC VOLTAGE DETECTOR USING CURRENT-BASED COMPARISON