Abstract:Cylindrical grinding of advanced ceramic materials, like silicon nitride, is a crucial machining process for high-precision industrial applications. The goal is to achieve a damage-free surface and subsurface while ensuring high grinding efficiency and desirable material removal rates. For the first time in the cylindrical grinding process, a laser structuring of the Si 3 N 4 workpiece has been employed to structure the material surface before the grinding process. The structuring process is conducted as a time-independent process. The laser structuring aims to generate a controllable damaged zone, which reduces grinding forces and temperature. This reduction subsequently leads to an increase in the achievable material removal rate. A series of line structures parallel to the workpiece axis with different structure percentages has been generated on the circumferential surface of the samples using a nanosecond laser. The influence of laser structuring on thermal damage zones has been microstructurally investigated through SEM and EDS analyses. The thermal damages caused by the laser before the grinding process (exhibiting different microstructures and chemical compositions) are categorized as the recast layer and the heat-affected zone (HAZ). The maximum damage thickness for the recast layer is 2 μm, whereas the thickness of the heat-affected zone is approximately 10 μm. The HAZ thickness could increase up to 50 μm if the snowflakes are placed in close proximity to the thermal damage zone. The study also explored the tangential grinding force and the surface integrity, including characteristics like surface roughness and microstructure of the ground surface in laser-assisted cylindrical grinding. The results indicate that laser structuring substantially reduces the tangential grinding force (up to 75 %). Moreover, the proposed laser-assisted grinding process could achieve a damage-free subsurface and even slightly better ground surface quality compared to the conventional grinding process. This study introduces a novel approach by predicting the grinding allowance through material analysis, aiming for a damage-free surface and subsurface.

Grinding Characteristics, Material Removal, and Damage Formation Mechanisms of Zirconia Ceramics in Hybrid Laser/Grinding

An Experimental Investigation of Grinding Force and Energy in Laser Thermal Shock-Assisted Grinding of Zirconia Ceramics

Effects of Laser-Assisted Grinding on Surface Integrity of Zirconia Ceramic

Experimental Investigation of Grinding Force and Material Removal Mechanism of Laser-Structured Zirconia Ceramics

Laser-Induced Deterioration Grinding of Zirconium Oxide (zro2) – Generation of Layer Patterns and Performance Evaluation

Surface prediction in laser-assisted grinding process considering temperature-dependent mechanical properties of zirconia ceramic

The Grinding Force Modeling and Experimental Study of ZrO2 Ceramic Materials in Ultrasonic Vibration Assisted Grinding

A Grinding Force Predictive Model and Experimental Validation for the Laser-Assisted Grinding (LAG) Process of Zirconia Ceramic

Material Removal Behavior in Scratching of Zirconia Ceramic Surface Treated with Laser Thermal Shock

Understanding Machinability Improvements and Removal Mechanism of Ceramic Matrix Composites During Laser-Ablating Assisted Grinding

Characterization of Zirconia-Based Ceramics After Microgrinding

Tribological behavior of zirconia ceramic with micro-channels produced by nanosecond laser

A novel low-damage and low-abrasive wear processing method of Cf/SiC ceramic matrix composites: Laser-induced ablation-assisted grinding

Grinding Force Modelling for Ductile-Brittle Transition in Laser Macro-Micro-structured Grinding of Zirconia Ceramics

Machinability: Zirconia-reinforced lithium silicate glass ceramic versus lithium disilicate glass ceramic

Kinematics and Simulation Analysis of Longitudinal-Torsional Ultrasonic Assisted Grinding of Zirconia Ceramics

Laser-assisted grinding of RB-SiC composites: Laser ablation behavior and mechanism

Investigation of laser-assisted cylindrical grinding of silicon nitride ceramics with controlled damage zone

Analysis of Diamond Wheel Wear and Surface Integrity in Laser-Assisted Grinding of RB-SiC Ceramics

Ultrashort Pulse Laser Processing of ZrO2 Ceramics

Experimental Investigations of Machining Characteristics of Laser-Induced Thermal Cracking in Alumina Ceramic Wet Grinding