Abstract:This study investigates the removal of aluminum and iron from rare earth element (REE) containing solutions by solvent extraction with saponified naphthenic acid and by hydrolysis-precipitation. The results emphasize both, the preferential application as well as limitations of every method. We find that emulsification occurring during the solvent extraction of aluminum is caused by its slow extraction rate in comparison to the neutralization reaction and by the proximity of the pH value required for aluminum extraction and the pH value at which hydrolysis of aluminum occurs. However, by choosing a long shaking time of at least 4 h, the emulsion recedes. The formation of emulsion can be avoided by strict control of pH value during the extraction. Moreover, the loading capacity of the organic phase with aluminum is limited due to the strong increase in viscosity of the organic phase with increasing aluminum concentration and due to the gel formation. Regarding the extraction of iron, the amount of extracted ions is limited due to the overlap of the pH range required for the extraction with pH range in which sparingly soluble iron oxides/hydroxides are formed. In summary, aluminum and iron can be simultaneously removed from REE-sulfate solution by solvent extraction with saponified naphthenic acid in one extraction stage only from diluted solutions. However, in comparison to the hydrolysis-precipitation method, a higher purity of the solution is achieved. A complete removal of aluminum and iron from concentrated solutions can be achieved in two stages. First, the content of aluminum and iron should be reduced by hydrolysis-precipitation. After that, a high-purity solution can be obtained by subsequent solvent extraction by saponified naphthenic acid.

Removal of Ferric Ions from Aluminum Solutions by Solvent Extraction, Part I: Iron Removal

A New Extraction Mechanism in Sulfuric Acid Media for the Recovery of Aluminum

Extracting Iron from Aluminum Sulfate Solution

The Recycling of Ferric Salt in Steel Pickling Liquors: Preparation of Nano-sized Iron Oxide

Removal of 4-Chlorophenol from Polluted Water by Aluminum-Iron Alloys.

Mechanism and kinetics of iron removal in Fe-Al-H2SO4 system by coordination precipitation

Iron: Removal from Aluminum

Separation of Aluminum and Iron from Lanthanum—A Comparative Study of Solvent Extraction and Hydrolysis-Precipitation

Extraction kinetics of separating molybdenum(VI) over iron(III) from high acid leach solutions with mixtures of P507 and N235

Removal of Aluminum from Rare-Earth Leaching Solutions Via a Complexation-Precipitation Process

Removal of Iron From Aluminum: A Review

Efficiently Selective Extraction of Iron (III) in an Aluminum‐based Metal‐organic Framework with Native N Adsorption Sites

Recovery of aluminum oxide and iron oxide from aluminum electrolysis iron-rich cover material and preparation of aluminum fluoride

A Novel Method to Remove Iron Impurity from Aluminum

Study on Aluminum Removal Through 5-Sulfosalicylic Acid Targeting Complexing and D290 Resin Adsorption

Enhanced extraction of scandium and inhibiting of iron from acid leaching solution of red mud by D2EHPA and sodium chloride

Recovery and Separation of Sulfuric Acid and Iron from Dilute Acidic Sulfate Effluent and Waste Sulfuric Acid by Solvent Extraction and Stripping

Removal of Impurities from Nickel and Cobalt in Mixed Hydroxide Precipitate with Solvent Extraction Using Di(2-Ethylhexyl) Phosphoric Acid

Removal of Aluminum from Synthetic Rare Earth Leach Solution by Selective Complexation and Turbidity Point Extraction

Removal of Iron(III) and Aluminum Ions from Phosphoric Acid–Nitric Acid Solutions by S957 Chelation Resin: Kinetics, Dynamic Adsorption, and Elution

Solvent extraction and separation of zinc-iron from spent pickling solution with tri-n-octylamine