Abstract:KH560 modification is exploited to successfully prepare a scalable crosslinked polyvinyl‐butyral‐based solid polymer electrolyte (PVB‐SPE) foil with remarkable ionic conductivity and superior mechanical, optical, and thermal performances. The laminated WO3–NiO device fabricated using the modified PVB‐SPE is functional at temperatures ranging from −20 to 80 °C, thereby showing promise for realizing commercially viable large‐area electrochromic devices. Polyvinyl butyral (PVB) is a well‐established polymer interlayer material that has been used in laminated safety glass panels for over 80 years. However, its intrinsically poor ionic conductivity (σ) severely restricts its widespread application as a solid polymer electrolyte (SPE) for laminated WO3–NiO electrochromic devices (ECDs). Here, a new strategy for significantly improving the σ of PVB via a cross‐linking reaction with 3‐glycidoxypropyltrimethoxysilane (KH560) is presented. The cross‐linked PVB‐SPE with 10 wt.% KH560 exhibits the highest room‐temperature σ value among the investigated samples (1.51 × 10−4 S cm−1), which is also higher than that of previously reported PVB‐based SPEs (10−5–10−7 S cm−1). Additionally, the prepared SPE exhibits comprehensive optical, mechanical, and thermal performances, including a high visible transmittance (>91%), relatively high adhesive strength (2.13 MPa), and superior thermal stability (up to 150 °C). Laminated WO3–NiO ECDs with dimensions of 5 × 5 cm2 and 20 × 20 cm2, fabricated by leveraging the aforementioned properties of the electrolyte, operate stably at temperatures ranging from −20 to 80 °C, underscoring the potential of the PVB‐SPE for realizing commercially viable large‐area ECDs.

A Novel Hybrid Quasi-Solid Polymer Electrolyte Based on Porous PVB and Modified PEG for Electrochromic Application

A PVB Electrolyte Film and Its Application in Electrochromic Laminated Glass

A method to achieve full incorporation of PMMA-based gel electrolyte in fiber-structured PVB for solid-state electrochromic device fabrication

Blue/green-to-transmissive Electrochromic-Supercapacitor Bifunctional Polymer Films Via Electropolymerization Containing 3,4-Propylenedioxythiophene Derivatives As Novel Donor Units

Transparent Succinonitrile-Modified Polyacrylate Gel Polymer Electrolyte for Solid Electrochromic Devices

A Scalable, Robust Polyvinyl‐Butyral‐Based Solid Polymer Electrolyte with Outstanding Ionic Conductivity for Laminated Large‐Area WO3–NiO Electrochromic Devices

Polyvinyl butyral-based gel polymer electrolyte films for solid-state laminated electrochromic devices

P(AMPS‐co‐PEGMA) Doped and PVDF‐HFP Enhanced Stretchable Polymer Electrolytes: Application as Flexible Electrochromic Devices

Research Progress in Polymer Electrolytes for Electrochromic Devices

Preparation and characterization of PEO based organic-inorganic hybrid gel polymers for electrochromic devices

High-Performance PVDF-HFP Based Gel Polymer Electrolyte Modified by Core-Shell SiO2-PMMA for Electrochromic Devices

Printable Electrolytes for Highly Efficient Quasi-Solid-state Dye-Sensitized Solar Cells

A salt-free poly(acrylic acid) hydrogel electrolyte with self-released ions for quasi-solid-state electrochromic devices

Novel PEO-based composite solid polymer electrolytes incorporated with active inorganic–organic hybrid polyphosphazene microspheres

Polyvinyl Butyral Solid Electrolyte Film and Its Electrochromic Laminated Safety Glass

A hybrid gel polymer electrolyte with imide groups modified by the coupling agent and its application in electrochromic devices

Low-power, fast response simplified electrochromic device based on functionalized gel electrolyte

Preparation and Characterization of Novel High-Performance N, N, N′, N′-tetraphenyl-p-phenylenediamine-Based Poly (ether Sulfone)s

A Strong and Highly Transparent Ionogel Electrolyte Enabled by In Situ Polymerization-Induced Microphase Separation for High-Performance Electrochromic Devices

Porous Polymer Electrolyte Based on Poly(vinylidene Fluoride)/comb-Liked Polystyrene Via Ionic Band Functionalization

Effect of PEG Molecular Weight on the Polyurethane-Based Quasi-Solid-State Electrolyte for Dye-Sensitized Solar Cells