Abstract:Based on the modified PMMA-PEG polymer loading with LiClO4/PC, a flexible, transparent free-standing quasi-solid polymer electrolyte (QSPE) was prepared. The ionic conductivity of QSPE membrane was carefully studied through electrochemical impedance spectroscopy. It was found that the QSPE membrane with 30 wt% 0.1 M LiClO4/PC displays a high conductivity (5.23 × 10−6 S/cm at room temperature), good transparency (over 70% in visible ranges) and a certain of mechanical strength. Furthermore, a novel fiber-network structured membrane of polyvinyl butyral (PVB) was designed and prepared via electro-spinning, which would allow the liquid QSPE fully complex with PVB polymer structurally. A great improvement for interfacial adhesion between the gel electrolyte and electrodes was achieved, the tensile strength increased to 0.31 MPa (QSPE-PVB) from 0.05 MPa (QSPE), while remaining a good transparency. Meanwhile, the ionic conductivity of the composite electrolyte reached a level of 10−5 S/cm.Using the gel composite electrolyte (QSPE-PVB membrane), all-solid-state electrochromic device (ECD) was assembled with a configuration of PProDot-Me2/QSPE-PVB/V2O5. This novel electrolyte could guarantee that PProDot-Me2 was able to switch its color from bleached state (Tb= 71.4% at 580 nm) to colored state (Tc= 23.7% at 580 nm) within 6 s under the applied potential of ±1.5 V. The as-fabricated QSPE-PVB ECD also exhibited an impressive stability of almost no transmittance attenuation. This new all-solid ECDs offered a certain operational advantage in real-world applications.

A method to achieve full incorporation of PMMA-based gel electrolyte in fiber-structured PVB for solid-state electrochromic device fabrication

A PVB Electrolyte Film and Its Application in Electrochromic Laminated Glass

A Novel Hybrid Quasi-Solid Polymer Electrolyte Based on Porous PVB and Modified PEG for Electrochromic Application

Transparent Succinonitrile-Modified Polyacrylate Gel Polymer Electrolyte for Solid Electrochromic Devices

Polyvinyl butyral-based gel polymer electrolyte films for solid-state laminated electrochromic devices

Integration of High Surface-Energy Electrochromic Polymer with In-Situ Polymerized Quasi-Solid Electrolyte for Efficient Electrochromism

High-conductivity Hydrophobic Fumed-SiO2 Composite Gel Electrolyte for High Performance Electrochromic Devices

A salt-free poly(acrylic acid) hydrogel electrolyte with self-released ions for quasi-solid-state electrochromic devices

High-Performance PVDF-HFP Based Gel Polymer Electrolyte Modified by Core-Shell SiO2-PMMA for Electrochromic Devices

Gel Electrolyte for Solid‐State Electrochromic Cell

Environmental Effects on the Ionic Conductivity of Poly(methyl Methacrylate) (Pmma)-Based Quasi-Solid-state Electrolyte

A Strong and Highly Transparent Ionogel Electrolyte Enabled by In Situ Polymerization-Induced Microphase Separation for High-Performance Electrochromic Devices

PMMA-Based Composite Gel Polymer Electrolyte with Plastic Crystal Adopted for High-Performance Solid ECDs

Research Progress in Polymer Electrolytes for Electrochromic Devices

Characteristics of PEMA/PVdF-HFP blend polymeric gel films incorporated with lithium triflate salt in electrochromic device

Low-power, fast response simplified electrochromic device based on functionalized gel electrolyte

A Novel Imide-Based Hybrid Gel Polymer Electrolyte: Synthesis and Its Application in Electrochromic Device

Realisation of Solid-State Electrochromic Devices Based on Gel Electrolyte

Ultra-strong ionic liquid-based polymer composite electrolyte for high performance electrochromic devices

Extraordinarily fast response all-solid-state electrochromic devices

Hybrid Gel Polymer Electrolyte with Good Stability and Its Application in Electrochromic Device