Abstract:Mechanical metamaterials with three-dimensional micro- and nanoarchitectures exhibit unique mechanical properties, such as high specific modulus, specific strength, and energy absorption. However, a conflict exists between strength and recoverability in nearly all the mechanical metamaterials reported recently, in particular the architected micro/nanolattices, which restricts the applications of these materials in energy storage/absorption and mechanical actuation. Here, we demonstrated the fabrication of three-dimensional architected composite nanolattices that overcome the strength-recoverability trade-off. The nanolattices under study are made up of a high-entropy alloy-coated (14.2-126.1 nm in thickness) polymer strut (approximately 260 nm in the characteristic size) fabricated via two-photon lithography and magnetron sputtering deposition. In situ uniaxial compression inside a scanning electron microscope showed that these composite nanolattices exhibit a high specific strength of 0.027 MPa/kg m<sup>3</sup>, an ultrahigh energy absorption per unit volume of 4.0 MJ/m<sup>3</sup>, and nearly complete recovery after compression under strains exceeding 50%, thus overcoming the traditional strength-recoverability trade-off. During multiple compression cycles, the composite nanolattices exhibit a high energy loss coefficient (converged value after multiple cycles) of 0.5-0.6 at a compressive strain beyond 50%, surpassing the coefficients of all the micro/nanolattices fabricated recently. Our experiments also revealed that, for a given unit cell size, the composite nanolattices coated with a high entropy alloy with thickness in the range of 14-50 nm have the optimal specific modulus, specific strength, and energy absorption per unit volume, which is related to a transition of the dominant deformation mechanism from local buckling to brittle fracture of the struts.

Nano-architected Metamaterials: Carbon Nanotube-Based Nanotrusses

Carbon Nanotube-Based Super Nanotubes: Tunable Thermal Conductivity in Three Dimensions

Carbon-nanotube-templated Carbon Nanofibers with Improved Mechanical Performance

Thermal Conductivity Of Configurable Two-Dimensional Carbon Nanotube Architecture And Strain Modulation

Tuning the Resonance Properties of 2D Carbon Nanotube Networks Towards a Mechanical Resonator

The Effects of Morphology and Temperature on the Tensile Characteristics of Carbon Nitride Nanothreads.

Mechanical Properties of Copper Octet-Truss Nanolattices

Graphene-Nanotube 3d Networks: Intriguing Thermal and Mechanical Properties

Carbon Nanotubes as a Basis of Metamaterials and Nanostructures: Crafting via Design Optimization

Mechanical and Thermal Properties of Graphyne-Coated Carbon Nanotubes: a Molecular Dynamics Simulation on One-Dimensional All-Carbon Van Der Waals Heterostructures

Superelastic bionic graphene/nanoceramic metamaterials with tunable thermo-mechanical performances

Prediction of highly thermal rectification behavior in carbon/C3N heteronanotubes based on nonequilibrium molecular dynamics simulations

Built from Connected Nested Tubes

Three-Dimensional High-Entropy Alloy–Polymer Composite Nanolattices That Overcome the Strength–Recoverability Trade-off

A Novel Carbon Fiber Reinforced Lattice Truss Sandwich Cylinder: Fabrication and Experiments

Lightweight, Flaw-Tolerant, and Ultrastrong Nanoarchitected Carbon.

A computational framework for nanotrusses: input convex neural networks approach

Mechanical metamaterials made of freestanding quasi-BCC nanolattices of gold and copper with ultra-high energy absorption capacity

Tailored carbon-based aramid nanofiber nanocomposites with highly anisotropic thermal conductivity and superior mechanical properties for thermal management

Stiff and Deformable Quasicrystalline Architected Materials

Discovery of quasi-disordered truss metamaterials inspired by natural cellular materials