Abstract:The transition from the cubic to monoclinic phase of Gd2O3 at high temperatures poses a significant challenge to the preparation of transparent Gd2O3 materials. In this work, we presented a straightforward yet effective method for fabricating transparent Gd2O3 ceramics. Via ZrO2 stabilization effect for phase structure, highly transparent Gd2O3 ceramics were successfully fabricated by vacuum sintering at 1850 °C for 8 h. The effect of different Zr (0 ∼ 13 at%) concentrations on phase transition, grain growth, fracture mode and optical properties of Gd2O3 transparent ceramics was investigated. As the Zr content increases, the transition from the cubic (C) to monoclinic (M) phase is effectively suppressed, which is crucial for achieving Gd2O3 transparent ceramics. Moreover, the results indicate that the addition of ZrO2 has a significant effect on grain growth by not only impeding the migration of grain boundaries but also affecting the phase composition. In addition, the 11 at% Zr-doped Gd2O3 ceramic exhibits the best optical properties, of which transmittance is about 76% at 850 nm and about 80% in the 2.5 µm ∼ 6 µm mid-infrared range. This work provides an illustrative example for the development of other ceramics with phase transition. The obtained Zr-doped Gd2O3 transparent ceramics with high optical quality are potential candidates for optical window, scintillator host and mid-infrared transmission materials.

Effects of Cation Ordering and Microstructure on LaGdZr2O7 Transparent Ceramics Processing by Vacuum Sintering

Effect of CaO doping on densification and micr‐ostructure control of highly transparent La0.4Gd1.6Zr2O7 ceramics

Preparation of non-stoichiometric Gd2+xZr2O7+3x/2 transparent ceramics by vacuum sintering

Vacuum sintering of highly transparent La1+xYb1+yZr2O7 ceramics with excess La and Yb contents

Effect of La2O3 on the microstructure and optical performance of (Tb0.8Y0.2-xLax)2O3 ceramics

Effects of Preparation Conditions on the Structural and Optical Properties of Spark Plasma‐Sintered PLZT (8/65/35) Ceramics

Vacuum sintering of Yb2O3 transparent ceramics: Effect of ZrO2 concentration on structural and optical properties

Transmittance enhancement of La0.4Gd1.6Zr2O7 transparent ceramic by aqueous AM gel-casting with pretreated powder

High Performance of La-doped Y2O3 Transparent Ceramics

Fabrication and mechanical behavior of nano-grained LaGdZr2O7 transparent ceramic

Highly transparent polycrystalline Gd2O3 ceramic attained via ZrO2 stabilization effect

Effect of sintering process on the microstructure and ionic conductivity of Li7–xLa3Zr2–xTaxO12 ceramics

Effect of Sintering Temperature on Structure and Ionic Conductivity of Li7−xLa3Zr2O12−0.5x (x=0.5~0.7) Ceramics

The origin of microstructural inhomogeneity in vacuum‐sintered ZrO2‐doped Lu2O3 transparent ceramics

High Transparency Nd: Y2O3 Ceramics Prepared with La2O3 and ZrO2 Additives

Effect of La2O3 on Microstructures and Laser Properties of Nd:YAG Ceramics

Fabrication and luminescent properties of Sm-doped Gd2Zr2O7 transparent ceramics

Sintering Temperature–induced Structural Transition in LaCrO3‐based Conducting Oxides Synthesized from Nano‐powders

Optimizing co-precipitated Nd:YAG nanopowders for transparent ceramics

Structural evolution, synthesis mechanism and thermal conductivity of (La0.2Nd0.2Sm0.2Gd0.2Yb0.2)2Zr2O7 high-entropy ceramic prepared by concurrent chemical coprecipitation method

Vacuum sintering of transparent Cr:Y2O3 ceramics