Adhesion Strength of the Cathode in Lithium-Ion Batteries under Combined Tension/shear Loadings

Hailing Luo,Juner Zhu,Elham Sahraei,Yong Xia

DOI: https://doi.org/10.1039/c7ra12382e

IF: 4.036

2018-01-01

RSC Advances

Abstract:A new test method is designed to measure the adhesion strength of electrodes under different stress states.

What problem does this paper attempt to address?

(Invited) Understanding the Coupled Electrochemical-Mechanical Behavior of Materials for Improving the Performance and Durability of Lithium-Ion Batteries

Yang-Tse Cheng

DOI: https://doi.org/10.1149/ma2022-012373mtgabs

2022-07-15

ECS Meeting Abstracts

Abstract:With an increasing demand for higher energy and power density of lithium-ion batteries (LIBs), the coupled electrochemical-mechanical degradation of electrode materials becomes a more pressing problem. In particular, fracture and delamination of electrodes can occur during repeated charging and discharging of LIBs. An improved understanding of the mechanical behavior of electrode materials, which often evolves with the state-of-charge and cycle number, is therefore necessary for improving the performance and durability of LIBs and other types of batteries. In this presentation, I will provide an overview of our recent work on using four complementary measurement techniques: (1) electrochemical nanoindentation, (2) scanning probe microscopy, (3) peel adhesion and cohesion test, and (4) electrode curvature measurement to help understand several coupled effects between mechanical and electrochemical behavior of materials on the performance and durability of high capacity electrodes. Examples include silicon/polymer porous composite electrodes, polymeric binders, lithium metal electrodes, and ceramic materials for the positive electrode and solid-state electrolyte. These characterization techniques may also be used to investigate the coupled electrochemical-mechanical behavior of a wide range of materials for lithium-ion batteries and beyond.
Measuring the coating adhesion strength of electrodes for lithium-ion batteries

W. Haselrieder,B. Westphal,H. Bockholt,A. Diener,S. Höft,A. Kwade

DOI: https://doi.org/10.1016/j.ijadhadh.2015.03.002

IF: 3.848

2015-07-01

International Journal of Adhesion and Adhesives

Abstract:The coating adhesion strength of lithium-ion battery electrodes is a very important mechanical property, affecting the electrochemical life time of battery cells and the electrochemical handling during cell manufacturing. Hence the establishment of a standardized pull-off test with high reproducibility was long time overdue. The measurement setup is realized in a material testing machine. Machine and process parameters have been investigated to propose a reliable measurement procedure with a clearly specified parameter setup. Data acquisition rate (f), contact stress (σc), dwell time (td) and pull-off velocity (vpo) were identified to affect the adhesion strength measurement significantly. Finally electrodes with material and process parameter variations were manufactured to assess the applicability of the presented method. The impact of the amount of binder and its molecular weight as well as the influence of the dry mixing and the dispersing process on adhesion strength was verified and the differences can be clearly distinguished by the developed test method.

materials science, multidisciplinary,engineering, chemical
Diffusion-Induced Transient Stresses in Li-Battery Electrodes Imaged by Electrochemical Quartz Crystal Microbalance with Dissipation Monitoring and Environmental Scanning Electron Microscopy

Netanel Shpigel,Mikhael D. Levi,Xiaopeng Cheng,Tianci Cao,Rui Wu,Tyler S. Mathis,Yuefei Zhang,Doron Aurbach,Yury Gogotsi

DOI: https://doi.org/10.1021/acsenergylett.9b00884

IF: 22

2019-01-01

ACS Energy Letters

Abstract:Quick charging of Li-ion batteries is often accompanied by rapid expansion of composite battery electrodes, resulting in the appearance of transient stresses inside the electrodes' bulk. Although predicted theoretically, they have never been tracked by direct in situ measurements. Herein, using multiharmonic electrochemical quartz crystal microbalance with dissipation monitoring (EQCM-D), acoustic images of strong transient deformations in LiFePO4 electrodes were obtained in the form of giant resonance frequency and resonance width shifts. The formation of cracks was verified by scanning electron microscopy. The effects of charging rate, stiffness of the polymeric binder, and solution concentration have been identified. The attractive feature of EQCM-D is its high sensitivity for selective probing of average mechanical characteristics of the operated electrodes, especially of the particle-binder interactions, directly linked to the electrode cycling performance. Using EQCM-D, an inexpensive, simple, and fast method of structural health monitoring for battery electrodes can be intelligently designed.
Employing Nanoscale Surface Morphologies to Improve Interfacial Adhesion Between Solid Electrolytes and Li Ion Battery Cathodes

Xin Su,Teng Zhang,Xin Liang,Huajian Gao,Brian W. Sheldon

DOI: https://doi.org/10.1016/j.actamat.2015.06.047

IF: 9.4

2015-01-01

Acta Materialia

Abstract:Solid state Li ion batteries are particularly susceptible to deleterious mechanical responses at interfaces, because the electrochemically driven volume changes must be accommodated by deformation of the solid electrolyte. In the current study, this was investigated with PEO electrolyte and V2O5 electrodes, using different morphologies (e.g. patterned films, plasma roughened surfaces, etc). Detailed finite element modeling of the experimental configuration was also used to analyze the results. Methods for improving the adhesion of this critical interface were also demonstrated. Relatively small improvements were attributed to plasma roughening. However, the introduction of large, thin sheets of material normal to the primary decohesion surface lead to unexpected large increases in the adhesive energy. For example, with patterned islands that were 800nm tall, the increase in adhesion was approximately 8 times larger than the corresponding surface area increase. A finite element simulation of the decohesion process shows good agreement with the experimental values. Based on this analysis, it appears that thin elastic sheets in a much softer matrix can reduce stresses at the delamination front. This shielding effect provides a novel approach for improving the failure resistance of PEO electrolyte/V2O5 interfaces in solid state batteries.
Effect of State-of-Charge and Air Exposure on Tensile Mechanical Properties of Lithium-Ion Battery Electrodes

Zhexin Pan,Tobias Sedlatschek,Yong Xia

DOI: https://doi.org/10.1149/1945-7111/ab8804

IF: 3.9

2020-01-01

Journal of The Electrochemical Society

Abstract:The large deformation and failure behaviors of electrodes under various SOC conditions are essential for understanding the battery impact response and reconstructing battery impact scenarios with numerical methods. Depending on the chemical activity, the electrodes may react with oxygen if exposed to air, which leads to change of mechanical properties to some extent. To obtain the real mechanical properties of electrodes as they are sealed inside a battery, an argon-protected testing method was developed to test the electrodes. In this way, we identified the SOC sensitivities of tensile behaviors for the electrodes extracted from a pouch cell for electronic devices. The mechanical properties of anode change with SOC but the cathode does not present apparent difference. By comparing test results of anode and anode current collector under different SOCs, we inferred that anode current collector is responsible for the SOC effect of anode. We further evaluated the influence of oxidation on the tensile behaviors of electrodes at different SOCs after exposing them in the air for different durations. For anodes from charged batteries, we come up with a couple of competing mechanisms to explain the non-monotonic change of mechanical properties along with air exposure.
Changes of adhesion properties for negative electrode and positive electrode under wet conditions and different states of charge

GuangQi Hong,Na Li,Heng Yang,Hao-sen Chen,WeiLi Song,DaiNing Fang

DOI: https://doi.org/10.1016/j.ijadhadh.2021.102870

IF: 3.848

2021-07-01

International Journal of Adhesion and Adhesives

Abstract:Debonding often occurs in flexible batteries due to mechanical and electrochemical coupling during service. Debonding of electrode will seriously affect the capacity and life of the battery, and even cause a short circuit inside the battery, resulting in spontaneous combustion. Here, the adhesion performance between the electrode sheet and the active material are investigated under the electrolyte environment and different states of charge (SOCs). A small stretcher loading device is used to perform stripping experiments on positive electrodes and negative electrodes in a glove box filled with argon to obtain the peel strength. The binders used in the positive and negative electrodes in this paper are polyvinylidene fluoride (PVDF) and Styrene-Butadiene Rubber/Carboxymethyl Cellulose (SBR/CMC). Compared with the electrode sheet without electrolyte, the peel strength of the positive electrode and negative electrode is decreased by 89.7% and 46.3%, respectively. The significant reduction in peel strength is due to the swelling effect of the electrolyte on the binder. The scanning electron microscope observation shows that there is a large number of active material particles at the interface of the positive electrode and the negative electrode after peeling. Additionally, the peel strength of the positive electrode was increases slightly with the increase of SOC and the added value is 14.8%. But the peel strength of negative electrode decreased with the increase of SOC and the added value is 47.6%. These results play an essential role in evaluating the interface peel strength of the electrode sheet in the different environment and designing electrochemical performance for batteries.

materials science, multidisciplinary,engineering, chemical
Interfacial adhesion energy of lithium-ion battery electrodes

Yan Wang,Yujie Pu,Zengsheng Ma,Yong Pan,Chang Q. Sun

DOI: https://doi.org/10.1016/j.eml.2016.08.002

IF: 4.728

2016-12-01

Extreme Mechanics Letters

Abstract:Interfacial stability of electrode materials is crucial to the internal resistance and electrochemical performance of the lithium-ion batteries. However, determination of the cohesive energy at the heterogeneous interface remains yet a great challenge. Here, we report an approach and outcomes of quantifying the heterogeneous interfacial adhesion strength of the lithium-ion battery electrodes using the combination of the bond-order-length–strength (BOLS) correlation theory and X-ray photoelectron spectroscopy (XPS). Results revealed that the core-bond electrons of Ge/Si, Cu/Sn, Si/C and Ge/C alloys undergo quantum entrapment, while the C 1s electrons in Si/C and Ge/C alloys undergo polarization. Most strikingly, besides the interfacial adhesion energies, we are able to gain the local bond energy, energy density, atomic cohesive energy, and free energy at the interfaces. The presented approach and outcomes not only clarify the origin of the energetic behavior of the hetero-junction interface but also provide with reliable strategies for designing alloy electrodes with desired functions.

mechanics,materials science, multidisciplinary
Li-Ion Battery Electrode Contact Resistance Estimation by Mechanical Peel Test

John Eric Vogel,Jarom G Sederholm,Edmund M Shumway,Gabriel J Abello,Stephen E. Trask,Dean Wheeler,Brian A Mazzeo

DOI: https://doi.org/10.1149/1945-7111/ac8504

IF: 3.9

2022-07-30

Journal of The Electrochemical Society

Abstract:Li-ion battery electrode electronic properties, including bulk conductivity and contact resistance, are critical parameters affecting cell performance and fast-charge capability. Contact resistance between the coating and current collector is often the largest electronic resistance in an electrode and is affected by chemical, microstructural, and interfacial variations. Direct measurements of contact resistance and bulk conductivity have proven to be challenging. In their absence, a mechanical electrode peel test is often used to compare adhesion and electrical contact resistance. However, using a micro-flexible-surface probe, contact resistance can be directly determined. This work compares contact resistance and mechanical peel strength of multiple commercial-grade HE5050 and NCM523 cathodes and graphite and silicon anodes. It was found that peel strength correlates well with contact resistance in a carefully curated data set (p < 0.05) and in some situations may be a good metric to estimate electrical properties. However, there were distinct outliers in the data set, indicating that peel strength may not accurately reflect electrical properties when there is significant variation in electrode composition. These results illustrate the value of the micro-flexible-surface probe in quantifying contact resistance and bulk conductivity to better understand how battery composition and processing steps affect microstructure and resulting cell performance.

electrochemistry,materials science, coatings & films
Adhesion Strength of an Active Material Layer/Cu Foil Interface in Silicon-Based Anodes

Kazuma Ogata,Yuto Kasuya,Xiang Gao,Yuto Shibayama,Aoi Takagi,Akio Yonezu,Jun Xu

DOI: https://doi.org/10.1021/acsami.4c02232

IF: 9.5

2024-04-02

ACS Applied Materials & Interfaces

Abstract:Lithium-ion batteries (LIB) stand as ubiquitous power sources in the industrial sector, with a mounting emphasis on their sustainability considerations, where safety, durability, and recyclability are all considered. Within the intricate architecture of LIB, the anode sheet processes a stratified composition comprising an active material layer and a copper foil serving as the current collector. The delamination of the active materials from the current collector is one of the major mechanical...

materials science, multidisciplinary,nanoscience & nanotechnology
Investigation of the Deformation Mechanisms of Lithium-Ion Battery Components Using In-Situ Micro Tests

Juner Zhu,Xiaowei Zhang,Hailing Luo,Elham Sahraei

DOI: https://doi.org/10.1016/j.apenergy.2018.05.007

IF: 11.2

2018-01-01

Applied Energy

Abstract:Understanding mechanisms of deformation of battery cell components is important in order to improve the mechanical safety of lithium-ion batteries. In this study, micro-scale deformation and failure of fully-discharged battery components including an anode, a cathode, and a separator were investigated at room temperature. Nanoindentation tests and in-situ tensile tests under scanning electron microscope (SEM) were carried out on the electrodes of a commercial battery cell in order to measure the elastic modulus of coating materials and the elastic plastic and fracture behavior of the electrodes. Additionally, interrupted tests were conducted on a polypropylene separator and its deformation at each stage was investigated under SEM. Samples with the same size were loaded to different strains and then fully unloaded. SEM and X-ray diffraction (XRD) techniques were subsequently used to analyze the changes in the microstructure such as crystal orientation and pore size. From these tests, it was found that cathode and anode coatings have distinct deformation mechanisms. The cathode develops a number of micro cracks on the surface before reaching final failure, while the anode maintains its integrity until later stages of deformation. The separator also shows unique stages of deformation such as elongation of fibrils and formation of new pores until reaching final onset of failure.
In Situ Electrode Stress Monitoring: An Effective Approach to Study the Electrochemical Behavior of a Lithium Metal Anode

Peng Liang,Gang Shao,Hailong Wang,Chang-an Wang

DOI: https://doi.org/10.1021/acsaem.1c00353

IF: 6.4

2021-03-19

ACS Applied Energy Materials

Abstract:The evolution of mechanical stress in lithium metal anodes has been suggested as a persistent challenge for large volume fluctuations, dendritic lithium deposition, and eventual failure of the electrodes. There is, however, only limited knowledge and probe methods regarding the stress generation of lithium metal anodes. Here, the stress evolution of a practical lithium metal anode during lithium plating/stripping was studied for the first time and in situ precise measurements were performed using a well-designed electrochemistry–mechanics-coupled cell device. A failure mechanism of the Li metal anode was proved by the observed Li morphology and the continuously increasing stress evolution of the Li metal over cycling. The Li metal anode suffers from a dramatic stress increase and irreversible volume expansion due to the formation of porous Li and "dead" Li after the continuous Li metal volume change during the electrochemical reaction. The real-time stress evolution of lithium could be probed with a variety of parameters, e.g., electrolytes, rates, cathode mass loadings, and even short circuits. This approach can be adopted for the in situ investigation of electrodes with large volume variations (Si and alloy anodes) to gain additional insights into the mechanical effects of energy storage, short circuit detection, and safe battery design.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00353?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00353</a>.SEM image of the cross section of the LTO electrode; Li insertion and extraction profiles of a symmetrical LTO–LTO cell; stress–charging/discharging curves of Li metal–LTO under a short circuit process; and electrochemical performances of Li metal–LTO batteries using the EM-5Li-Na IL electrolyte (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00353/suppl_file/ae1c00353_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Investigation of the Adhesion Strength along the Electrode Manufacturing Process for Improved Lithium‐Ion Anodes

Nicolas Billot,Till Günther,David Schreiner,Ralf Stahl,Jakob Kranner,Moritz Beyer,Gunther Reinhart

DOI: https://doi.org/10.1002/ente.201801136

IF: 4.149

2019-05-13

Energy Technology

Abstract:Nowadays, lithium‐ion batteries (LIBs) represent a key technology for energy storage in electromobility or stationary applications. Lithium‐ion electrodes, more specifically their mechanical properties, such as the adhesion strength, play an active role for the life span of LIBd. Herein, parameter‐ and process‐oriented investigations are conducted within electrode manufacturing to identify the main levers to improve the mechanical characteristics of electrodes. Among the investigated factors and processes, the binder amount, the coating thickness, and the calendaring represent the main influencing factors of the adhesion strength. A transfer of these findings can play an important role for the implementation of new anode materials, such as silicon, enabling high‐energy batteries with increased lifetime.

energy & fuels
Development of an adhesion model for graphite-based lithium-ion battery anodes

Nicolas Billot,Moritz Beyer,Nico Koch,Christian Ihle,Gunther Reinhart

DOI: https://doi.org/10.1016/j.jmsy.2020.10.016

IF: 12.1

2021-01-01

Journal of Manufacturing Systems

Abstract:Lithium-ion Batteries (LIBs) have become a key technology for energy storage in electromobility or stationary applications. However, lifetime, energy density and production costs of LIBs need to be improved in order to satisfy the growing demands of these applications. Two possible approaches to improving the specific energy are the use of thicker electrode coatings or the use of high capacity materials such as silicon. Unfortunately, these two levers lead to a decrease of the adhesion strength of the electrodes which compromises the lifetime of a cell and leads to high production scrap. That is why a lot of research activity is directed at improving the adhesion strength of electrodes. However, due to the high complexity of the physics of adhesion, further investigations are necessary. In this work, a thorough analysis of adhesion theories is conducted and supplemented by an expert survey in order to select significant influencing factors of the adhesion strength of graphite-based anodes. The investigation of the influence of the boundary layer properties on the adhesion strength constitutes the focus of the present work. The obtained results are presented in a mathematical-empirical adhesion model for graphite-based anodes.

engineering, manufacturing, industrial,operations research & management science
Comparative Study of the Adhesion Properties of Ceramic Composite Separators Using a Surface and Interfacial Cutting Analysis System for Lithium-Ion Batteries

Hyunkyu Jeon,Junyoung Choi,Myung-Hyun Ryou,Yong Min Lee

DOI: https://doi.org/10.1021/acsomega.7b00493

IF: 4.1

2017-05-17

ACS Omega

Abstract:Because of the constantly increasing demand for highly safe lithium-ion batteries (LIBs), interest in the development of ceramic composite separators (CCSs) is growing rapidly. Here, an in-depth study of the adhesion properties of the Al2O3 ceramic composite coating layer of CCSs is conducted using a peel test and a surface and interfacial cutting analysis system (SAICAS). Contrary to the 90 and 180° peel tests, which resulted in different adhesion strengths even for the same CCS sample, the SAICAS is able to measure the adhesion properties uniformly as a function of depth from the surface of the coating layer. The adhesion strengths measured at the midlayer (F mid) and interface (F inter, interlayer between the separator and the ceramic coating layer) are compared for various types of CCS samples with different amounts of polymeric binder, and it is found that F inter is higher than F mid for all CCSs. Compared with F mid, F inter is significantly affected by storage in the liquid electrolyte (under wet condition).

chemistry, multidisciplinary
Stress Evolution in Lithium Metal Electrodes and the Impact of Artificial Passivating Layers

Jung Hwi Cho,Xingcheng Xiao,Kai Guo,Huajian Gao,Brian W. Sheldon

DOI: https://doi.org/10.1149/ma2020-022498mtgabs

2020-01-01

Abstract:The potential advantages of lithium (Li) metal anodes have been widely touted (lowest reduction potential, etc.). However, the poor stability of Li metal / liquid electrolyte interfaces leads to chronic problems, such as dendrite formation and capacity loss. The possible impact of mechanical effects on interface stability and dendrite formation is a critical question that is difficult to probe directly. In-situ curvature measurements are an important tool for monitoring stresses during battery cycling. Using this technique during Li plating and examining film thickness effects, it is possible to separate contributions from the bulk lithium metal and the solid electrolyte interphase (SEI). These investigations show that significant stresses are created in the SEI films. Similar stress evolution measurements were also performed during lithium plating and stripping using both soft (PEO) and hard (LiF) artificial surface layers. The results indicate that stresses in surface films can be tuned to improve performance when artificial SEI layers are employed. A basic chemo-mechanical model indicates that hybridizing the two layers may benefit interface stability and performance in Li metal anodes.
Adhesive Sulfide Solid Electrolyte Interface for Lithium Metal Batteries

Wei Jiang,Lijing Yan,Xiaomin Zeng,Xiangjuan Meng,Renzhi Huang,Xinxin Zhu,Min Ling,Chengdu Liang

DOI: https://doi.org/10.1021/acsami.0c17828

2020-11-25

Abstract:All solid-state Li metal batteries have drawn extensive attention because of the limited side reaction and consequent safety character. The applications of Li metal anodes are indispensable for realizing high energy density but still face many obstacles. One of the critical issues is the contact failure of the solid/solid interface. The rigid interface between a sulfide electrolyte and Li anode cannot afford the volume variation during cycling. Herein, we design an adhesive solid-state electrolyte film, which is supported by hot melt adhesive porous membranes for anode protection. The Li symmetric cells and all solid-state batteries based on adhesive electrolyte layers all exhibit enhanced long cyclic stability and suppressed voltage polarization. The peel strength tests confirm that the electrolyte layers decorated with adhesive components can offer intimate Li metal/electrolyte physical contact and withstand the volume variation of the Li anode. The adhesion force from porous membranes is believed to play a vital role in maintaining solid–solid interfacial contact stability. This work gives a new insight for interface engineering in all solid-state Li metal batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c17828?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c17828</a>.Adhesive property evaluation of EVAP films; TGA curve of EVAP films under a N2 atmosphere; X-ray powder diffraction pattern of sulfide electrolyte samples; FESEM images of LGPS powders at various magnifications; Nyquist plots; time-dependent electrochemical impedance spectra of Li symmetric cells; digital photographs of detached coin cells; FESEM images of Li metal plates after 200 cycles; peel strength test for the Li metal/SEs-EVAP layer interface; FESEM images of pristine Li metal plates; overpotential curves; X-ray powder diffraction pattern of NCM111 samples; FESEM images of NCM111 samples at various magnifications; charge/discharge curves of the ASSLBs for the first cycle under 80 MPa; charge/discharge curves of the ASSLBs for the 50th and 100th cycles; and energy efficiency of the ASSLBs at 0.2 C (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c17828/suppl_file/am0c17828_si_001.pdf">PDF</a>)Combustion experiment of EVAP membranes under a blue flame (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c17828/suppl_file/am0c17828_si_002.mp4">MP4</a>)Intimate anode/electrolyte interfacial contact in Li/SEs-EVAP/Li symmetric cells after cycling (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c17828/suppl_file/am0c17828_si_003.mp4">MP4</a>)Peel process of Li/SEs-EVAP/Li symmetric cells after cycling (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c17828/suppl_file/am0c17828_si_004.mp4">MP4</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
The Role of Surface Free Energy in Binder Distribution and Adhesion Strength of Aqueously Processed LiNi 0.5 Mn 1.5 O 4 Cathodes

Andreas Weber,Noah Keim,Andreas Gyulai,Marcus Muller,Francesco Colombo,Werner Bauer,Helmut Ehrenberg

DOI: https://doi.org/10.1149/1945-7111/ad3a24

IF: 3.9

2024-04-05

Journal of The Electrochemical Society

Abstract:This study identifies the critical aspects of binder distribution and mechanical integrity in aqueously processed LNMO cathodes, employing a comprehensive approach involving surface characterization techniques, adhesion strength testing, and electrochemical characterization. The investigation includes the use of the Washburn and Sessile Drop methods for surface free energy analysis, revealing key insights into the interfacial tensions between cathode constituents. The results explain the formation of carbon-binder-domains and their impact on adhesion strength, with a particular focus on the conductive additives' (CA) surface area. The study demonstrates the effectiveness of reducing CA surface area and employing alternative conductive additives, such as vapor-grown carbon fibers (VGCF), in improving adhesion strength and mitigating capacity fade attributed to delamination during cycling. Furthermore, the research emphasizes the role of heat treatment beyond the melting point of the polyvinylidene fluoride (PVDF) latex binder, showcasing its influence on wetting and enhancing mechanical integrity. The presented methodology provides a valuable tool for predicting and optimizing binder distribution, offering insights into improving the overall performance and reliability of aqueously processed cathodes for advanced lithium-ion batteries.

electrochemistry,materials science, coatings & films
Nanomechanics of Li-ion battery materials

Hugues-Yanis Amanieu

2015-12-14

Abstract:Active materials used in lithium ion batteries consist of micro-metric ceramic particles. Mechanical failure can happen within these brittle particles due to large internal stresses provoked by lithium intercalating in the crystalline structure during charge and discharge. Their mechanical behavior is directly related to some key intrinsic parameters, namely the elastic modulus, the fracture toughness and lithium di usivity. This works deals with the development of new characterization techniques to quantify these parameters at the local scale. Obtaining quantitative measurements is notably challenging for this type of specimen due to the highly heterogeneous structure of battery electrodes. For this, spinel LiMn2O4-based commercial cathodes are proposed as material of investigation. First, composition analysis of cathode materials at di erent states of charge was done. In general it was noticed that commercial cells are not as consistent as laboratory cells: impurities are often present (Ni, Co,...) and particles can be porous agglomerates of nanoparticles as well as large single grains. However only spinel structure was detected by X-ray di raction and Rietveld analysis showed a typical lattice expansion for higher lithium concentrations. A method using nanoindentation was developed. It consists of applying a large number of indents in cathode cross-sections and subsequently ltering the measurements depending on whether they t the set of hypotheses of the Oliver and Pharr method. It was observed that for decreasing lithium concentrations, the elastic modulus and the hardness increase from 87 GPa (0% State of Charge) to 104 GPa (100% SoC) and from 7.0 GPa (0% SoC) to 8.0 Gpa (100%SoC), respectively. With the help of contact-resonance atomic force microscopy, the elastic property could also be qualitatively mapped and it seems that the particles are homogeneous. Added to micro-raman spectroscopy, it was observed that neighboring particles can have di erent lithiation levels. The fracture toughness was estimated by measuring the crack opening displacement by atomic force microscopy and applying Irwin’s near eld theory. A toughness of about 0.9 MPa·m was found but should not be taken at face-value. Irwin’s theory requires a purely elastic-brittle fracture with traction-free crack walls. Unfortunately this condition cannot be met due to the size of the particles and the toughness is surely overestimated. Associated with electron backscattered di raction, cleavage planes were also evaluated on a reference {111} wafer. It was found that cracks always propagate in the <121> direction, corresponding to {101} planes just below the surface. At higher depths (> 100 nm), the crack deviates of 30 to 40◦. The last part of this work consists of developing a model to better comprehend electrochemical strain microscopy “time spectroscopy” (ESM-TS). It is the most promising technique to quantify locally ionic di usion coe cients. An AFM cantilever is used

Chemistry,Engineering,Materials Science
In situ method for stress measurements in film-substrate electrodes during electrochemical processes: key role of softening and stiffening

Haimei Xie,Yilan Kang,Haibin Song,Jiangang Guo,Qian Zhang

DOI: https://doi.org/10.1007/s10409-020-00995-8

IF: 3.5

2020-10-20

Acta Mechanica Sinica

Abstract:Electrode stress is one of the main driving forces of electrochemical degradation, which is directly related to battery cycle life, thus attracting great interest. Herein, we propose an in situ method to measure bilayer stresses in film-substrate electrodes during electrochemical processes. This method consists of two parts: stress models featuring Li-dependent material modulus and in situ deformation measurements, through which electrode bilayer stresses evolution accompanied by Li-dependent material modulus can be quantitatively characterized. As application of the method, typical silicon-composite and carbon-composite film-substrate electrodes are selected for in situ mechanical measurements and experimental analysis is performed. Results show that silicon material and carbon material exhibit significant, continuous softening and stiffening, respectively. In two film-substrate electrodes, electrode material films experience compressive stress and current collector substrates undergo a tensile-to-compressive conversion across the thickness. Besides, moduli and stresses in both electrodes vary nonlinearly with capacity, presenting non-overlapping paths between lithiation and delithiation. Based on experimental data, we further demonstrate the key role of Li-dependent modulus on electrode stresses, finding that silicon material softening decreases and carbon material stiffening increases electrode stresses. The deficiencies of current stress measurement method based on Stoney equation and the applicability of our method are discussed.

engineering, mechanical,mechanics
Fracture Mode Analysis of Lithium-Ion Battery under Mechanical Loading

Hailing Luo,Xuqian Jiang,Yong Xia,Qing Zhou

DOI: https://doi.org/10.1115/imece2015-52595

2016-01-01

Abstract:Due to its extensive application, the safety issue of lithium-ion battery has received increasing attention. For crashworthiness design of battery in electric vehicles, it is of great importance to investigate the response of the battery under mechanical loading and understand the mechanism of internal short circuit. Quasi-static and intermediate strain rate uniaxial tension tests were conducted on the electrodes and the separators. The high speed camera and DIC (digital image correlation) method were adopted to measure the strain while a self-design load cell was used to measure force in dynamic test. Either loading velocity or loading direction was varied in different tests. The upper limit of the test strain rate achieved 66 /sec. All the component materials showed strain rate dependency and separators demonstrated noticeable anisotropy. Quasi-static penetration tests were conducted on two different types of pouch cell using steel and plastic punch heads. For both Type A pouch cell and Type B pouch cell, during penetration process using plastic punch head, no significant voltage drop or temperature rise was observed. During penetration process using steel punch head, only Type A pouch cell produced short circuit. When the punch head was removed, the voltage of the cells could recover to certain level. From post mortem examination, it was found that for a single pouch cell, all the electrodes presented the same fracture mode that the stacked anode and cathode formed several fragments in the penetration path, while the separators in between only formed a central crack when the punch head went through. Since the separators had a larger elongation ratio than the electrodes, the extended separators around the rupture location could block the direct and constant contact between anode and cathode, electrodes and steel punch, which explained why no massive internal short circuit was initiated. The drop tower was used to conduct dynamic penetration test. The results indicated that under dynamic loading, internal short circuit was more likely to be triggered which can be explained by the strain rate effect of the separators. This study highlighted the importance of the separator to the safety performance of pouch cells.

Adhesion Strength of the Cathode in Lithium-Ion Batteries under Combined Tension/shear Loadings

(Invited) Understanding the Coupled Electrochemical-Mechanical Behavior of Materials for Improving the Performance and Durability of Lithium-Ion Batteries

Measuring the coating adhesion strength of electrodes for lithium-ion batteries

Diffusion-Induced Transient Stresses in Li-Battery Electrodes Imaged by Electrochemical Quartz Crystal Microbalance with Dissipation Monitoring and Environmental Scanning Electron Microscopy

Employing Nanoscale Surface Morphologies to Improve Interfacial Adhesion Between Solid Electrolytes and Li Ion Battery Cathodes

Effect of State-of-Charge and Air Exposure on Tensile Mechanical Properties of Lithium-Ion Battery Electrodes

Changes of adhesion properties for negative electrode and positive electrode under wet conditions and different states of charge

Interfacial adhesion energy of lithium-ion battery electrodes

Li-Ion Battery Electrode Contact Resistance Estimation by Mechanical Peel Test

Adhesion Strength of an Active Material Layer/Cu Foil Interface in Silicon-Based Anodes

Investigation of the Deformation Mechanisms of Lithium-Ion Battery Components Using In-Situ Micro Tests

In Situ Electrode Stress Monitoring: An Effective Approach to Study the Electrochemical Behavior of a Lithium Metal Anode

Investigation of the Adhesion Strength along the Electrode Manufacturing Process for Improved Lithium‐Ion Anodes

Development of an adhesion model for graphite-based lithium-ion battery anodes

Comparative Study of the Adhesion Properties of Ceramic Composite Separators Using a Surface and Interfacial Cutting Analysis System for Lithium-Ion Batteries

Stress Evolution in Lithium Metal Electrodes and the Impact of Artificial Passivating Layers

Adhesive Sulfide Solid Electrolyte Interface for Lithium Metal Batteries

The Role of Surface Free Energy in Binder Distribution and Adhesion Strength of Aqueously Processed LiNi 0.5 Mn 1.5 O 4 Cathodes

Nanomechanics of Li-ion battery materials

In situ method for stress measurements in film-substrate electrodes during electrochemical processes: key role of softening and stiffening

Fracture Mode Analysis of Lithium-Ion Battery under Mechanical Loading