Abstract:BACKGROUND Manganese‐based catalysts were considered the most promising catalysts for low‐temperature selective catalytic reduction (NH3‐SCR) reactions. In this work, a series of Mn3Fe2NbyOx catalysts were synthesized by co‐precipitation method for low‐temperature NH3‐SCR and SO2 tolerance tests. RESULTS The catalysts were characterized by BET, SEM, XRD, XPS, H2‐TPR, and NH3‐TPD. Mn3Fe2Nb0.01Ox exhibited exceptionally high activity with a conversion of almost 100% from 80°C to 240°C, and a NO conversion of more than 75% at 40°C, while the NO conversion at 140°C in the presence of 100 ppm SO2 remained above 90% for 4 h. CONCLUSION According to the characterization results, Nb modification can expand the specific surface area of the catalyst, improve the structure of the catalyst, and make the active components on the catalyst surface more dispersed. Moreover, the Nb‐modified catalyst reduced the content of Mn2+ on the catalyst surface and strengthened the electronic interactions between elements. The synergistic effects among Mn, Fe, and Nb facilitate the formation of more chemically adsorbed oxygen, which enhances the reduction capacity of the catalyst. This facilitates the adsorption of NH3 by the catalyst at low temperatures and promotes the process of low‐temperature NH3‐SCR reaction. More importantly, the Nb‐modified catalyst possessed more weak acid sites, and the higher surface acidity was conducive to the inhibition of SO3 generation, which enhanced the sulfur poisoning resistance of the catalyst. © 2024 Society of Chemical Industry (SCI).

Morphological Effects of Manganese Dioxide on Catalytic Reactions for Low-Temperature Nh3-Scr

Effects of Mno2 Crystal Structure and Surface Property on the Nh3-Scr Reaction at Low Temperature

Manganese Oxide Nanorod Catalysts for Low-Temperature Selective Catalytic Reduction of NO with NH3

Catalytic Reduction of NOx with NH3 over Different-Shaped MnO2 at Low Temperature

Structure–performance relationships of MnO2 nanocatalyst for the low-temperature SCR removal of NOX under ammonia

Low-Temperature Selective Catalytic Reduction of NO with NH3 over Mn2O3-Doped Fe2O3 Hexagonal Microsheets

Structural and Surface Effect of MnO2 for Low Temperature Selective Catalytic Reduction of NO with NH3

Manganese Oxides Supported on Multi-Walled Carbon Nanotubes for Selective Catalytic Reduction of NO with NH3: Catalytic Activity and Characterization

Abundant Oxygen Vacancies Induced by the Mechanochemical Process Boost the Low-Temperature Catalytic Performance of MnO2 in NH3-SCR

Synthesis, characterization and catalytic performances of Cu- and Mn-containing ordered mesoporous carbons for the selective catalytic reduction of NO with NH3

The Effects of Manganese Precursors on NO Catalytic Removal with MnOx/SiO2 Catalyst at Low Temperature

Structural properties of MnOx/Al-SBA-15 in low-temperature selective catalytic reduction of NOx with NH3

Low-temperature NOx Selective Catalytic Reduction Activity Evaluation of Hollow-Spherical Manganese Oxides

Ni-Mn Bi-Metal Oxide Catalysts for the Low Temperature SCR Removal of NO with NH3

Manganese Oxide Catalysts Supported on Zinc Oxide Nanorod Arrays: A New Composite for Selective Catalytic Reduction of NOx with NH3 at Low Temperature

Preparation of Manganese Oxides Supported on Graphene Catalysts and Their Activity in Low-Temperature Nh3-Scr

Effect of Mn Loading on Catalytic Performance of Nmno/tio in NH-SCR Reaction

Surface Structure Sensitivity of Manganese Oxides for Low-Temperature Selective Catalytic Reduction of NO with NH3

Effect of Nb‐doping on the MnFeOx catalyst for NH3‐SCR reaction at low‐temperature

Manganese–niobium Mixed Oxide Catalyst for the Selective Catalytic Reduction of NOx with NH3 at Low Temperatures

Interactions between CO oxidation and selective catalytic reduction of NO with NH3 over Mn-based catalysts