Abstract:In this paper, the influence of cooling rate on acicular ferrite (AF) nucleation and growth on Ti-Mg oxide was studied using high-temperature confocal laser scanning microscopy. The compositions and elemental distributions of the inclusions were studied via electron probe microanalysis, and the crystallographic orientation relationships between AF and inclusions were investigated systematically via electron back scattered diffraction. The results indicated that the initial transformation temperature of AF decreased from ~656 to ~609 °C and the growth rate of AF raised from 6.74 to 55.52 μm/s as the cooling rate increased from 1 to 12 °C/s. The area fraction and the nucleation probability of AF reached a maximum at 2 °C/s, which was the most suitable cooling rate for AF formation. The Ti-Mg-Mn-O, Ti-Mg-Mn-O·TiN and Ti-Mg-Mn-O·MnS inclusions in Ti-Mg deoxidized steel were all effective for AF nucleation. For the four samples at different cooling rates, all AF grains had four kinds of orientation relationships with Ti-Mg-Mn-O oxides: Baker–Nutting (B-N), Nishiyama–Wasserman (N-W), {100}Ferrite║{110}Oxide, and irrational orientation relationships. The {100}Ferrite║{110}Oxide orientation was also a common parallel relationship between the B-N and N-W orientation relationships. The lattice mismatch between the AF and oxide was low, and the interface between the AF and oxide was close to a coherent interface when the first three kinds of orientation relationships were adopted. The formation of a Mn-depleted zone (MDZ) around Ti-Mg-Mn-O oxide could increase the driving force of ferrite formation, and it contributed more to the nucleation of those AF grains that had no orientation relationships with oxides.

Experimental and first principle calculation study on titanium, zirconium and aluminum oxides in promoting ferrite nucleation

Effect of oxides on nucleation of ferrite: first principle modelling and experimental approach

First-principles Calculation of the Interaction of Mn with ZrO2 and Its Effect on the Formation of Ferrite in High-Strength Low-Alloy Steels

Nucleation and growth mechanisms of ferrite on Mg-Ti-oxide surfaces: First-principles investigation

Ni X Cr ( X = 2 and 3): the Top Choice for Enhancing Bonding Performance of ZTA–Fe Interfaces Demonstrated by First Principles Calculations

First-Principles Investigations of the Structural, Anisotropic Mechanical, Thermodynamic and Electronic Properties of the AlNi2Ti Compound

Systematic study on orientation relationships between acicular ferrite and Ti-Mg oxide at different cooling rates in low-carbon steel

Theoretical Study of the Effects of Alloying Elements on TiO2/Ti2AlNb Interface Adhesion Properties.

The Origin of Different Morphology of Internal Oxide Precipitates in Ferritic and Austenitic Steels

Chemical bonding, thermodynamic stability and mechanical strength of Ni3Ti/α-Al2O3 interfaces by first-principles study

Study on the mechanism of AF nucleation induced by complex oxide inclusions after LF refining in oxide metallurgical steel

Microstructure Refinement via Nucleation of Intragranular Acicular Ferrite Stimulated by Ti-Containing Core–Shell Structured Particles in Low-Carbon Steel

Effect of Fe content on microstructure and hardness of Ti-4.5Mo–5Al-1.8Zr-2.5Cr-1.1Sn titanium alloy based on high-throughput diffusion couple

Orderly Nucleation and Competitive Growth Behaviors of Ti-Al Intermetallic Compounds in Ti/TiAl3 Diffusion Couple under High Temperature

Nucleating Acicular Ferrite with Galaxite (Al2O3MnO) and Manganese Oxide (MnO2) in FeMnAlC steels

Effect of Zr and Al Addition on Nanocluster Formation in Oxide Dispersion Strenghthened Steel-an ab initio Study

Comparative First-Principles Study of the Y2Ti2O7/Matrix Interface in ODS Alloys

Nucleation of Intragranular Acicular Ferrite in the Heat Affected Zone of Ti-Bearing Hsla Steel

Exploring crystal structures, stability and mechanical properties of Fe, Mn-containing intermetallics in Al-Si Alloy by experiments and first-principles calculations

Revisiting dissolution behavior of interfacial oxides in hot-compression bonding of stainless steel by combination of experiments and first-principles calculations

Study on the growth and morphology evolution of titanium oxide clusters in molten iron with molecular dynamics simulation