Abstract:A novel fiber-optic refractive index (RI) sensor based on a splicing point tapered fiber Michelson interferometer is proposed. It consists of a short section of thin-core fiber (TCF), which is spliced to a standard single-mode fiber, then the fused region is drawn into a taper by using residual heat. The interference between the core and cladding modes in the TCF is utilized, which is insensitive to variations in the RI of the surrounding environment but susceptible to external temperature changes. However, owing to the Fresnel reflection on the fiber end face, the intensity of the reflection spectrum decreases with increasing RI of the surrounding environment. Thus, the RI and temperature can be demodulated by the intensity and wavelength of the reflection spectrum, respectively, which can eliminate the crosstalk between RI and temperature. We experimentally found that the sensor has RI sensitivity of up to 68.60 dB/RIU for a TCF length of 10 mm and a waist diameter of 50 mu m. The temperature characteristics of the sensor in the range of 30 to 90 degrees C were also investigated, and a sensitivity of about 57 pm/degrees C was obtained. Moreover, the compact size, easy fabrication, and low cost of the proposed fiber-optic RI sensor make it an attractive device.

Optical Fiber Interference Sensor Based on Fiber Ending Micro-Groove Fabricated by Femtosecond Laser

An Interferometric Dual Microfiber Refractive Index Sensor via Tapering of Femtosecond Laser Perforated Optical Fiber

Novel Intensity-demodulated Fiber-optic Refractive Index Sensor Based on Splicing Point Tapered Fiber

Fiber Inline Michelson Interferometer Fabricated by One-Step Femtosecond Laser Micromachining for Sensing Applications

Optical fiber micro-hole sensor fabricated with femtosecond laser

Highly Sensitive Refractive Index Optical Fiber Sensors Fabricated by a Femtosecond Laser

An Open-Cavity Fiber Fabry-Perot Interferometer Fabricated by Femtosecond Laser Micromachining for Refractive Index Sensing

In-Line Fiber Fabry-Perot Refractive-Index Tip Sensor Based on Endlessly Photonic Crystal Fiber

Temperature-insensitive Refractive Index Sensor Based on an Optical Fiber Extrinsic Fabry–Perot Interferometer Processed by a Femtosecond Laser

Femtosecond Laser Fabricated In-Line Micro Multicavity Fiber FP Interferometers Sensor

Refractive Index Sensor Based on a Microhole in Single-Mode Fiber Created by the Use of Femtosecond Laser Micromachining

Ultra compact and sensitive optical fiber interferometric refractive index sensor

Refractive-index-modified-dot Fabry-Perot fiber probe fabricated by femtosecond laser for high-temperature sensing

Microfiber Fabry-Perot interferometer fabricated by taper-drawing technique and its application as a radio frequency interrogated refractive index sensor.

A Miniature Fiber-Optic Refractive-Index Sensor Based on Laser-Machined Fabry-Perot Interferometer Tip

Femtosecond laser-inscribed fiber interface Mach–Zehnder interferometer for temperature-insensitive refractive index measurement

Micro Multicavity Fabry–Pérot Interferometers Sensor in SMFs Machined by Femtosecond Laser

Fiber Inline Interferometric Refractive Index Sensors Fabricated by Femtosecond Laser and Fusion Splicing

Trench-embedding Fiber Taper Sensor Fabricated by a Femtosecond Laser for Gas Refractive Index Sensing

Sensitive refractive index sensor based on an assembly-free fiber multi-mode interferometer fabricated by femtosecond laser

Laser-Micromachined Fabry-Perot Fiber-Optic Tip Sensor for Temperature-Independent Measurement of Refractive Index