Abstract:The sealing of large diameter rotating shaft in some special applications especially in aerospace and military industry needs to be sealed with magnetic fluids. However, the major problems of restricting the application of large diameter magnetic fluid rotary seal is the decrease of the pressure-resistance capacity of magnetic fluid seal at high temperatures and the bigger breakaway torque at low temperatures. To research effect of the temperature on the pressure-resistance capacity and breakaway torque of large diameter magnetic fluid seal, a sealing device with the diameter size of rotary shaft for 190 mm and the sealing gap for 0.1 mm was designed. Through the experimental test studied on the pressure-resistance capacity at -55 degrees C-70 degrees C and the breakaway torque at -55 degrees C-20 degrees C, exploring the influence rules of injection volumes of magnetic fluid and the standing time on the breakaway torque under at -55 degrees C. The experimental results show that the decrease of the saturation magnetization of magnetic fluid at high temperatures result in the pressure-resistance capacity falls, and the increase of the magnetic fluid viscosity at low temperatures is the key factors which causes the bigger breakaway torque. In theory, the analytical expression of between the viscous drag torque and the temperatures were derived, which could qualitatively explain the experimental rules of between the breakaway torque and the temperature at -55 degrees C-20 degrees C. In addition, the breakaway torque of magnetic fluid seal increases as the addition of the standing time and eventually becomes stable at -55 degrees C, and between the breakaway torque and the injection volumes of magnetic fluid showed a linearly change.

Influence of Particle Size Distribution of Magnetic Fluid on the Resistance Torque of Magnetic Fluid Seal

Influence of Rheological Properties on the Starting Torque of Magnetic Fluid Seal

Influence of Viscosity and Magnetoviscous Effect on the Performance of a Magnetic Fluid Seal in a Water Environment

Theoretical Analysis and Experimental Study of the Characteristics of Magnetic Fluid Seal with a Large Diameter at High/low Temperatures

Experimental analysis of starting torque of perfluoro polyethers-based magnetic fluid seal

Influence of Magnetic Fluid Evaporation on Pressure Resistance of Magnetic Fluid Seal

Theoretical Analysis and Experimental Study on the Influence of Magnet Structure on Sealing Capacity of Magnetic Fluid Seal

Research on a Large Diameter Magnetic Fluid Seal with Thin-Wall Parts

The Simulation of the Magnetic Particle Deposition and the Effect on the Magnetic Fluid Sealing Performance

Influence of High Viscosity and Magnetoviscous Effect on the Washout Resistance of Magnetic Fluid

The Influence of Magnetic Fluid Yield Stress on the Performance of Magnetic Fluid Seal

Investigation on the Influence of Temperature on Starting Torque of Magnetic Fluid Seal

The Influence of the Thermal Expansion on the Magnetic Fluid Sealing Performance

Particle Size Dependent Rheological Property in Magnetic Fluid

Influence of Gravity on the Anti-Pressure Ability of Magnetic Fluid Seal

The Influence of the Temperature Rise on the Sealing Performance of the Rotating Magnetic Fluid Seal

An analysis on the magnetic fluid seal capacity

Theory Analyses and Experimental Study on Starting Torque and Seal Capacity of Field-Control Magnetic Fluid Seal

A comparative study of magnetic seals by ferrofluids, magnetorheological fluids and magnetic powders

Experimental Study of Static Sealing Structure with Large Diamter and Sealing Gap Using Magnetic Fluid

Analytical and Experimental Study of Sealing Behavior at Water and Magnetic Fluid Interface