Abstract:International Journal of Damage Mechanics, Ahead of Print. The temperature of a deep shale reservoir may reach more than 100°C, and the effect of thermal shock on shale hydraulic fracturing has rarely not been considered in previous studies. Based on mesoscopic damage mechanics and the finite element method, a thermo-hydro-mechanical-damage (THMD) coupling model considering temperature, seepage, stress, and damage fields was constructed to investigate the effects of reservoir temperature, convective heat transfer coefficient (h), in-situ stress difference and bedding plane angle (αθ) on shale hydraulic fracturing. The results show that multiple hydraulic fractures (HFs) can occur under thermal shock and that HFs control the distribution of seepage, temperature, and stress fields. Reservoir temperature, in-situ stress difference and αθ are primary factors affecting hydraulic fracturing, whereas h is a secondary factor. When the reservoir temperature rises from 50°C to 150°C, the initiation and breakdown pressures decrease by 65.5% and 16.7%, respectively. HFs cross the bedding plane more easily, and fracture complexity is obviously enhanced. A higher h is favourable for slightly reducing the initiation and breakdown pressures, but it has little influence on the fracture complexity. Once the in-situ stress difference is low, there is a high fracture complexity, but HFs are more easily captured by bedding planes to limit the propagation of fracture height. When the in-situ stress difference is high, HFs are more likely to form bi-wing fractures. Whether αθ is too large or small, it is not conducive to improving the fracture complexity. In this study, when αθ is 30°, HFs and bedding planes intersect to form a fracture network. Essentially, thermal shock plays a key role in reducing the initiation pressure and forming multiple HFs during the fracturing process, and fracture propagation mainly depends on the injection pressure. The results can serve as reasonable suggestions for the optimization of shale hydraulic fracturing.

Coupled Temperature Field Model of Gas-Hydrate Formation for Thermal Fluid Fracturing

Improved Thermal Model for Hydrate Formation Drilling Considering Multiple Hydrate Decomposition Effects

Numerical simulation of fracture temperature field distribution during oil and gas reservoir hydraulic fracturing based on unsteady wellbore temperature field model

Investigating fracture initiation and propagation in deep buried shale due to thermal shock: a numerical approach

Numerical simulation on hydraulic fracture propagation in laminated shale based on thermo-hydro-mechanical-damage coupling model

Characterization of methane hydrate extraction influenced by hydraulic fractures using a coupled thermo-hydro-mechanical-chemical model

Combined Effects of Thermal Perturbation and In-situ Stress on Heat Transfer in Fractured Geothermal Reservoirs

Research on Hydrate Formation Rules in the Formations for Liquid CO2 Fracturing

Mass and Heat Transfer of Thermochemical Fluids in a Fractured Porous Medium

A thermo-flow-mechanics-fracture model coupling a phase-field interface approach and thermo-fluid-structure interaction

Thermo-hydro-chemical modeling and analysis of methane extraction from fractured gas hydrate-bearing sediments

A framework to model the hydraulic fracturing with thermo-hydro-mechanical coupling based on the variational phase-field approach

Investigation of thermal-hydro-mechanical coupled fracture propagation considering rock damage

An Integrated Model for Fracture Propagation and Production Performance of Thermal Enhanced Shale Gas Recovery

MATHEMATIC MODELING ON THERMAL RECOVERY OF NATURAL GAS HYDRATE

The thermal-fluid-mechanical (TFM) coupling method based on discrete element method (DEM) and the application of CO2 fracturing analysis

A Model for Calculating Temperature in the Formation Fractures and Adjacent Area During Full 3-D Hydraulic Fracturing

A Unified Model To Predict Flowing Pressure and Temperature Distributions in Horizontal Wellbores for Different Energized Fracturing Fluids

Transient Gas–liquid–solid Flow Model with Heat and Mass Transfer for Hydrate Reservoir Drilling

Calculation of Temperature in Fracture for Carbon Dioxide Fracturing

A Numerical Simulation of High-Temperature Rock Hydraulic Fracturing Based on Coupled Thermo-Mechanical Peridynamics