Abstract:Purpose This paper aims to present a pipeline to progressively deal with the online external parameter calibration and estimator initialization of the Stereo-inertial measurement unit (IMU) system, which does not require any prior information and is suitable for system initialization in a variety of environments. Design/methodology/approach Before calibration and initialization, a modified stereo tracking method is adopted to obtain a motion pose, which provides prerequisites for the next three steps. Firstly, the authors align the pose obtained with the IMU measurements and linearly calculate the rough external parameters and gravity vector to provide initial values for the next optimization. Secondly, the authors fix the pose obtained by the vision and restore the external and inertial parameters of the system by optimizing the pre-integration of the IMU. Thirdly, the result of the previous step is used to perform visual-inertial joint optimization to further refine the external and inertial parameters. Findings The results of public data set experiments and actual experiments show that this method has better accuracy and robustness compared with the state of-the-art. Originality/value This method improves the accuracy of external parameters calibration and initialization and prevents the system from falling into a local minimum. Different from the traditional method of solving inertial navigation parameters separately, in this paper, all inertial navigation parameters are solved at one time, and the results of the previous step are used as the seed for the next optimization, and gradually solve the external inertial navigation parameters from coarse to fine, which avoids falling into a local minimum, reduces the number of iterations during optimization and improves the efficiency of the system.

An Improved Initial Alignment Method for Slave IMU of ADPOS under Disturbance Condition

Real-Time LiDAR Data Assocation Aided by IMU in High Dynamic Environment

An Improved Strapdown Inertial Navigation System Initial Alignment Algorithm for Unmanned Vehicles

A Position Loci-Based In-Motion Initial Alignment Method for Low-Cost Attitude and Heading Reference System

A Unified Initial Alignment Method of SINS Based on FGO

A GNSS Aided Initial Alignment Method for MEMS-IMU Based on Backtracking Algorithm and Backward Filtering

A progressive online external parameter calibration and initialization method for stereo-IMU system

An improved robust initial alignment method under geographic latitude uncertainty and external vibration and shock scenarios

An Improved SINS Alignment Method Based on Adaptive Cubature Kalman Filter

The effectiveness of patching for amblyopia should be tested with untreated control subjects.

Initial Alignment of Large Azimuth Misalignment Angles in SINS Based on Adaptive UPF

A New Kalman Filter-Based In-Motion Initial Alignment Method for DVL-Aided Low-Cost SINS

Anti-swaying Self-Alignment Method Based on Observation Vector Inertia for SINS under Latitude Uncertainty

Rapid Initial Heading Alignment Using Single-Antenna GNSS and a Low-Grade IMU

RODM-Alignment: An Inertial Alignment Algorithm for Sliding Window Reverse Optimization Delayed Marginalization

Robust Initial Alignment for SINS/DVL Based on Reconstructed Observation Vectors

An Improved Initial Alignment Method Based on SE2(3)/EKF for SINS/GNSS Integrated Navigation System with Large Misalignment Angles

A tightly-coupled LIDAR-IMU SLAM method for quadruped robots

An Improved In-Motion Coarse Alignment Method for SINS/GPS Integration with Initial Velocity Error Suppression

Rapid in-motion heading alignment using time-differenced carrier phases from a single GNSS antenna and a low-grade IMU

An Improved In-flight Alignment Method Based on Backtracking Navigation for GPS-aided Low Cost SINS With Short Endurance