Abstract:Nb3Sn superconductors have significant applications in constructing high-field (> 10 T) magnets. This article briefly reviews development of Nb3Sn superconductor and proposes prospects for further improvement. It is shown that significant improvement of critical current density (Jc) is needed for future accelerator magnets. After a brief review of the development of Nb3Sn superconductors, the factors controlling Jc are summarized and correlated with their microstructure and chemistry. The non-matrix Jc of Nb3Sn conductors is mainly determined by three factors: the fraction of current-carrying Nb3Sn phase in the non-matrix area, the upper critical field Bc2, and the flux-line pinning capacity. Then prospects to improve the three factors are discussed respectively. An analytic model was developed to show how the ratios of precursors determine the phase fractions after heat treatment, based on which it is predicted that the limit of current-carrying Nb3Sn fraction in subelements is ~65%. Then, since Bc2 is largely determined by the Nb3Sn stoichiometry, a thermodynamic/kinetic theory was presented to show what essentially determines the Sn content of Nb3Sn conductors. This theory explains the influences of Sn sources and Ti addition on stoichiometry and growth rate of Nb3Sn layers. Next, to improve flux pinning, previous efforts in this community to introduce additional pinning centers (APC) to Nb3Sn wires are reviewed, and an internal oxidation technique is described. Finally, prospects for further improvement of non-matrix Jc of Nb3Sn conductors are discussed, and it is seen that the only opportunity for further significantly improving Jc lies in improving the flux pinning.

Enhanced Critical Current Densities in Nb3Sn Superconducting Strands Prepared by Bronze Process

An Investigation Into The Heat Treatment Tolerance Of Wst Nb3sn Strands Produced For Massive Fusion Coils

Microstructure Evolution of Nb3sn Superconductors During Diffusion Treatment by Bronze Route

Characterization and Analysis of Microstructures of Nb_3Sn Multifilamentary Superconductors during Diffusion Treatment by Bronze Route

Effect of Nb3Sn Coarse Grains on Critical Current Densities of Internal Tin Nb3Sn Strand

Metallurgy and Superconductivity in Bronze-Processed Nb3sn Doped Cerium and Cerium-Titanium

Internally Oxidized Nb3Sn Strands with Fine Grain Size and High Critical Current Density

Effect of New Heat Treatment on Microstructure and Critical Current Density of NbTi Superconducting Wire

Microstructure and superconducting properties comparison of bronze and internal tin process Nb3Sn strands for ITER

Residual Stress in Nb3Sn Superconductor Strand Introduced by Structure and Stoichiometric Distribution after Heat Treatment

Study on preparation of Nb<sub>3</sub>Sn films by bronze route

Effect of Preheat Treatment on the Critical Current Density in Nb46. 5Ti/Cu Composites

Fabrication and Characterization of Internal Sn and Bronze-Processed Nb3Sn Strands for ITER Application

Optimization of Bronze Processed ${\hbox {nb}}_{3}{\hbox {sn}}$ Strand for ITER at WST

Heat Treatment and Structure Optimizations of Internal Tin Nb3Sn Superconducting Strands in WST

[P67] Isothermal Section of the Ti-Nb-Sn Ternary System at 700 °C

Effect of Cubic Equiaxed Grains and Its Ti-Stabilizing Performance in Nb3sn Strands

A review and prospects for Nb3Sn superconductor development

Effects of Heat Treatments on the Nb<sub>3</sub>Sn Composite Strands

Performance Optimization of Internal Tin Process Multifilamentary Nb3Sn Strands

Fabrication of Low AC Loss Cu0.5Mn-Based NbTi Superconducting Strands