Abstract:A magnetorheological (MR) brake under compression-shear mode is designed, simulated and experimentally investigated in this paper. A MR brake under compression-shear mode was first designed considering compression enhanced shear yield stress of MR fluid. Then, the operating principle of the MR brake was illustrated and mathematical torque expressions, operating under compression-shear mode assuming Herschel–Bulkley model, was further established. Moreover, simulation analysis of the designed magnetic circuit was performed as well. An experimental prototype was fabricated and tested to evaluate the transmission performance of MR brake. The results showed that the large torque could be produced at high applied currents, high compressive stress, large compressive strain and small initial gap distances. The rotational speed and compressive speed had little effect on the torque. The characteristic rising time of the torque was greatly affected by the rotational speed, the compressive strain, and compressive speed. However, the current had little effect on the rising time. The time constant would became shorter when both the rotational speed and the compressive speed were faster. Through analyzing the compression of particle chains in MR fluids directly, it was found that the diameter and the length of the particles chains brought a strong influence on the essential property of MR fluids under compression. Thus, the compressive stress or compressive strain and the initial gap distance also played an important role in enhancing the torque. The results also showed that the proposed MR brake could generate a maximum torque of 241 Nm, about 17.9 times the magnitude of braking torque without compression, and achieve a high torque density of 125.6 kN m–2 and a time constant of 58 ms. This study provides a better understanding of MR brake under compression-shear mode and the implications for many high-power applications.

Design, Simulation and Testing of a Novel Radial Multi-Pole Multi-Layer Magnetorheological Brake

Design, testing and analysis of a novel automotive magnetorheological braking system

Design and Development of Cylindrical MR Fluid Brake with Multi-Coil Structure

Design and testing of a novel two-way controllable overrunning clutch based magneto-rheological brake

An experimental study on torque characteristics of magnetorheological brake with modified magnetic core shape

Design and optimization of squeeze-shear mode MR brake with multi-fluid flow channels based on Multi-objective sooty tern optimization algorithm

Analysis and Design of Circular Plate MR Fluids Brake

Design and performance evaluation of a multi-disc magnetorheological fluid brake for A00-class minicars

Study of a magnetorheological brake under compression-shear mode

A new design of small-sized magnetorheological brakes based on the mixed mode operation for high torque efficiency

A performance evaluation of an automotive magnetorheological brake design with a sliding mode controller

A linear magnetorheological brake with multipole outer coil structure for high on-state and low off-state force outputs

The Magnetorheological Fluid: Testing on Automotive Braking System

Two-wheeler magnetorheological drum brake operating under hybrid mode for enhancing braking torque: Development and validation

Design of the Low Inertia Composite-disc Type Magnetic Brake

Magnetorheological and Wedge Mechanism-Based Brake-by-Wire System with Self-Energizing and Self-Powered Capability by Brake Energy Harvesting

Development of a Small Rotary MR Brake Working in Mixed Mode for Haptic Applications

Design and test validation of a novel permanent magnet eddy current brake

A novel PM-electromagnet brake embedded with rolling balls

DESIGN OF PNEUMATIC POSITION CONTROL BRAKE USING MAGNETO-RHEOLOGICAL FLUID

Magnetic Circuit Design and Mechanical Performance Study for a MR Damper