Abstract:Basic properties of fly ash samples from different urban waste combustion facilities in China were analyzed using as X-ray fluorescence (XRF), scanning electron microscopy (SEM), X-ray diffraction (XRD). The leaching toxicity procedure and some factors influencing heavy metals distribution in fly ash were further investigated. Experimental results indicate that the fly ash structures are complex and its properties are variable. The results of XRF and SEM revealed that the major elements (>10000 mg/kg, listed in decreasing order of abundance) in fly ash are O, Ca, Cl, Si, S, K, Na, Al, Fe and Zn. These elements account for 93% to 97%, and the content of Cl ranges from 6.93% to 29.18 %, while that of SiO2 does from 4.48% to 24.84%. The minor elements (1000 to 10000 mg/kg) include Cr, Cu and Pb. Primary heavy metals in fly ash include Zn, Pb, Cr, Cu etc. According to standard leaching test, heavy metal leaching levels vary from 0 to 163.10 mg/L (Pb) and from 0.049 to 164.90 mg/L (Zn), mostly exceeding the Chinese Identification Standard for hazardous wastes. Morphology of fly ash is irregular, with both amorphous structures and polycrystalline aggregates. Further research showed that heavy metals were volatilized at a high furnace temperature, condensed when cooling down during the post-furnace system and captured at air pollution control systems. Generally, heavy metals are mainly present in the forms of aerosol particulates or tiny particulates enriched on surfaces of fly ash particles. The properties of fly ash are greatly influenced by the treatment capacities of incinerators or the variation of waste retention time in chamber. Fly ash from combustors of larger capacities generally has higher contents of volatile component and higher leaching toxicity, while those of smaller capacities often produce fly ash containing higher levels of nonvolatile components and has lower toxicity. The content of heavy metals and leaching toxicity maybe have no convincing correlation, and high alkali content of CaO greatly contribute to leaching toxicity of heavy metal and acid neutralization capacity against acid rain.

Measurement and Prediction of Fly Ash Resistivity over a Wide Range of Temperature

Sensitivity Analysis on the Maximum Ash Resistivity in Terms of Its Compositions and Gaseous Water Concentration

Evaluation on Reactivity of Fly Ash from Different Sources in Alkali Activated System-Progressing Environmentally Construction Through Waste Utilization

A general mechanistic model of fly ash formation during pulverized coal combustion

Experimental Study on Electrostatic Precipitation of Low-Resistivity High-Carbon Fly Ash at High Temperature

Investigation of Basic Properties of Fly Ash from Urban Waste Incinerators in China.

MINERAL MAGNETISM OF POWER-PLANT FLY ASH AND ITS ENVIRONMENTAL IMPLICATION

Leaching of Heavy Metals from MSWI Fly Ash: Experiments Vs. Simulation

Effect of Chemical Compositions on Ash Fusibility Characterization of a Jincheng Anthracite During Combustion and Gasification

SEM/EDS and XRD characterization of raw and washed MSWI fly ash sintered at different temperatures.

Inﬂuence of Temperature and Atmosphere on Polychlorinated Dibenzo-P-dioxins and Dibenzofurans Desorption from Waste Incineration Fly Ash.

Experimental study on cement kiln dust removal by high-temperature electrostatic precipitator

Relationship Between Coal Ash Composition and Ash Fusion Temperatures

Thermal Studies of Fractionated Lignite and Brown Coal Fly Ashes

Influence of Coal-Fired Fly Ash on Measurement Error of NO2 Electrochemical Sensors

Nonferrous Metal Flue Gas Purification Based on High-Temperature Electrostatic Precipitation

Modeling of arsenic migration and emission characteristics in coal-fired power plants

Experimental Study on the Radiative Properties of Fly Ash in the Radiant Syngas Cooler of Gasifier

Study on particle radiative properties of lignite, hard coal and biomass fly ashes in the infrared wavelength range

INDICATORS OF THE DEGREE OF DISPERSION OF ASH-ENTRAINMENT AND CAO CONTENT AS FACTORS AFFECTING THE RADIOACTIVITY OF FLY ASH FROM BROWN COAL THERMAL POWER PLANTS

Impact of PM10 Particles on the Measurement Error of SO2 Electrochemical Gas Sensor