Abstract:Frequency locking phenomenon induced by modal coupling can effectively overcome the dependence of peak frequency on driving strength in nonlinear resonant systems and improve the stability of peak frequency, which has a fundamental role in improving the dynamic performance of resonant devices. Most research has been focused on a single mechanical frequency locking, but less research has been done on the double frequencies locking phenomenon. In this study, the double frequencies locking phenomenon is first proposed through a 1:3:3 internal resonance of a three degrees of freedom (3-DOF) magnetic coupled resonant system driven by piezoelectricity. Firstly, the resonator is designed using three cantilever beams, permanent magnets and piezoelectric actuator. The nonlinear governing equations, representing the first, second and third modes, are obtained by a 3-DOF lumped parameter model of the resonator. The double frequencies locking phenomenon in a 3-DOF resonant system is measured experimentally and studied theoretically. Both theoretical predictions and experimental results show that with the increase of driving force, the first frequency locking phenomenon occurs due to the coupling vibration between the first and second modes. Interestingly, as the drive force continues to increase, the first frequency locking switches to the second frequency locking, accompanied by the transfer of vibration energy from the first mode to the third mode. Typically, the physical conditions of the first and second frequencies locking are deduced theoretically. Besides, a synchronous linear mass sensing scheme for double analytes is proposed by using double frequencies locking phenomenon. By measuring the shifts of the first and second locking frequencies, the mass detection of the double analytes can be carried out simultaneously.

Synchronization of Electrically Coupled Micromechanical Oscillators with a Frequency Ratio of 3:1

Frequency Locking in the Internal Resonance of Two Electrostatically Coupled Micro-Resonators with Frequency Ratio 1:3

Frequency Stability Improvement for Piezoresistive Micromechanical Oscillators Via Synchronization

Double Mechanical Frequencies Locking Phenomenon in a Piezoelectric Driven 3-DOF Magnetic Coupling Resonator

Amplifying Charge-Sensing in Micromechanical Oscillators Based on Synchronization

Coupling piezoresistive MEMS oscillator based on high order synchronization

FREQUENCY STABILITY OF MICROMECHANICAL BEAM OSCILLATOR UNDER SUBHARMONIC SYNCHRONIZATION

Synchronization of Micromechanical Oscillators Using Light

Anomalous Amplitude-Frequency Dependence in a Micromechanical Resonator under Synchronization

Micromechanically-coupled resonated system for synchronized oscillation with improved phase noise

Phase-delay Induced Variation of Synchronization Bandwidth and Frequency Stability in a Micromechanical Oscillator

Synchronization and Phase Noise Reduction in Micromechanical Oscillators Arrays Coupled through Light

Frequency comb in 1:3 internal resonance of coupled micromechanical resonators

Synchronization bandwidth enhancement induced by a parametrically excited oscillator

Nonlinearity-Induced Asymmetric Synchronization Region in Micromechanical Oscillators

MEMS Based Ultra-High Order Frequency Multiplication Utilizing Superharmonic Synchronization Effect

Synchronization by Magnetostriction

Frequency stabilization of self-sustained oscillations in a sideband-driven electromechanical resonator

MEMS Huygens Clock Based on Synchronized Micromechanical Resonators

Synchronization of Optomechanical Oscillator and Breathing Soliton

Effects of Phase Delay on Synchronization in a Nonlinear Micromechanical Oscillator