Abstract:This article introduces a hybrid 3-D frequency selective structure (FSS) that offers high stopband suppression and low insertion loss to mitigate pattern degradation resulting from the mutual coupling of co-aperture array antennas. Traditional 2-D FSSs exhibit good passband performance but lack cross-coupling between resonators, making it difficult to achieve strong stopband suppression at a lower frequency. In contrast, traditional 3-D FSSs provide strong stopband suppression, but the vertical structures pose challenges for impedance matching, leading to high passband loss and poor angular stability. The FSS proposed in this article combines the advantages of both 2-D and 3-D FSSs. It introduces transmission zeros by combining a vertical surface with a cross-shaped metal strip on the foundational 2-D passband FSS. This design significantly enhances the stopband suppression capability of the FSS at the frequencies of interest without compromising the low insertion loss performance in the passband. Simulation results indicate that the proposed 3-D FSS achieves a -10 dB stopband within the frequency range of 1.2 to 2.93 GHz, with a stopband suppression of -16 dB at 2.7 GHz. Furthermore, the average insertion loss within the passband frequency range of 3.3-3.8 GHz remains low, staying below 0.23 dB. The FSS's transmission response remains stable under oblique incidences ranging from 0 degrees to 60 degrees. The operating principle of the FSS is elucidated using an equivalent circuit model. A prototype FSS is fabricated and experimentally characterized for validation. The measured results align with the simulated ones, confirming the FSS's high stopband suppression, low insertion loss, and excellent angular stability, making it a viable solution for mitigating pattern degradation in co-aperture array antennas.

A Closely Located Dual-Band Fss With Frequency Stability For Multi-Frequency Communication

A Novel Dual-Band Frequency Selective Surface (FSS)

A Tunable Bandpass FSS with High Angular Stability

A Novel Miniaturized Strong-Coupled FSS Structure with Excellent Angular Stability

A Novel Angularly Stable Wide Passband Frequency Selective Surface

Miniaturised FSS Structure with Excellent Angular Stability Based on Strong Coupling for Millimetre-Wave Communication

A Novel Tunable Frequency Selective Surface Absorber with Dual-Dof for Broadband Applications.

A Bandpass Frequency Selective Surface With a Low Cross-Polarization Based on Cavities With a Hybrid Boundary

A novel FSS structure with high selectivity and excellent angular stability for 5G communication radome

A Novel Miniaturized Multiband Strong Coupled-FSS Structure Insensitive to Almost All Angles and All Polarizations

A Novel Miniaturized Dual-band Frequency Selective Surface

Implementation of 3-D Bandstop Frequency-Selective Structures with Ultralarge Angular Stability Utilizing Narrow L-Shaped Strip Lines

A Dual-Passband Frequency Selective Surface with High Angular Stability and Polarization Insensitivity

An Ultraminiaturized Dual-Stopband Frequency Selective Surface for Ultra High Frequency.

A Hybrid 3-D Frequency Selective Structure Featuring Enhanced Stopband Suppression and Reduced Insertion Loss

Filtenna-Filtenna Design for Broadband and High-Selectivity Frequency Selective Surface

A Fifth-Order X-Band Frequency Selective Surface with High Selectivity and Angular Stability Based on 3-D Coupling Slot

Design of Frequency Selective Surface Structure With High Angular Stability for Radome Application

AN ANGULAR STABILIZED FREQUENCY SELECTIVE SURFACE BY USING CAPACITANCE LAYERS STRUCTURE

A Novel FSS Structure with Great Insensitivity to Incident Angles for High Performance Millimeter Wave Communication Radome

Bandpass Frequency Selective Surface with Two Sharp Sidebands Based on Shunted Quarter‐mode Substrate Integrated Waveguide Cavities