Abstract:The Fukushima accident shows that In-Vessel Retention (IVR) of molten core debris has not been appropriately assessed, and a certain pressure (upto 8.0 MPa) still exists inside the reactor pressure vessel (RPV). Generally, the pressure was supposed to be successfully released, and the externally cooled lower head wall mainly experienced the temperature difference which may be more than 1000 degrees C. Therefore, in order to make the IVR succeed, it is necessary to investigate the creep behavior and damage distribution of the RPV under complex thermal-mechanical loadings. Accordingly, considering the unlikely core meltdown scenario as a severe accident condition, the failure site and time have to be predicted for a safety assessment purpose. Due to heavy thick wall of the RPV, the high temperature gradient inevitably results in various failure modes, i.e., plastic failure and creep failure. In disclosing it, the finite element model (FEM) has been developed for simulating the failure processes and the visco-plastic behavior of vessel wall. In accounting for the most dangerous situation, the critical heat flux (CHF) loading is applied on the RPV as a limit boundary. Subsequently, some failure modes has been found as local melting, plastic damage and creep damage by FEM. Furthermore, it is found that the RPV failure varies with the internal pressures. For the situation of low pressure and high temperature, the failure dominated by creep takes place at the hot focus site. With the further increase of pressure, the thinnest wall thickness is weakest for maintaining the RPV integrity, the damage of which initiates at the outside of RPV by plasticity. Besides, the multiaxial state of stress is found to accelerate the damage evolution on the thinnest site, and the uniaxial failure criterion underestimate the damage accumulation. (C) 2016 Elsevier Ltd. All rights reserved.

Study on Ultimate Load Capacity of Reactor Pressure Vessel under Critical Heat Flux

Investigation on Structural Behaviors of Reactor Pressure Vessel with the Effects of Critical Heat Flux and Internal Pressure

Creep and Damage Analysis of Reactor Pressure Vessel Considering Core Meltdown Scenario

Creep Deformation and Damage Behavior of Reactor Pressure Vessel under Core Meltdown Scenario

Study on Structural Integrity of Reactor Pressure Vessel with Various Ablation under Core Meltdown Accident

Investigation on Multilayer Failure Mechanism of Rpv with A High Temperature Gradient from Core Meltdown Scenario

Comparative Study on Reactor Pressure Vessel Failure Behaviors with Various Geometric Discontinuities under Severe Accident

Study on Structural Failure Mode of Reactor Pressure Vessel Under Severe Core Meltdown Accident

Study on Structural Failure of RPV with Geometric Discontinuity under Severe Accident

The Influence of the Crust Layer on Rpv Structural Failure under Severe Accident Condition

Structural Integrity Investigation for RPV with Various Cooling Water Levels under Pressurized Melting Pool

Experimental Investigation on Critical Heat Flux of IVR-ERVC System under the Natural Circulation Condition

Experimental Research for CHF Sensitivity of Heat Flux Distribution under IVR Conditions

Investigation on the RPV Structural Behaviors Caused by Various Cooling Water Levels under Severe Accident

Heat Transfer Experiment with the Prototypical Ra Number of Heavy Metallic Layer in IVR Strategy

The Influence Of Crust Layer On Reactor Pressure Vessel Failure Under Pressurized Core Meltdown Accident

Critical Heat Flux and Heat Transfer Behaviors on Aged RPV Outer Wall Surface in Flow Boiling under IVR Conditions

Experimental Research on Influence of Real Surface Material and Aging Effect on ERVC-CHF of RPV

The Influence of Flooding Water Level on Cooling Limit of RPV Outer Wall under ERVC Conditions

Analysis of Safety Margin of In-Vessel Retention for AP1000

Thermal Loading Failure Analysis of Molten Pool in the Reactor Vessel