Experimental Investigation on Vacuum Arc Behaviors Subjected to Larger Diameter Cup-Shaped and Coil-Shaped Axial Magnetic Field Electrode
Lijun Wang,Lilan Hu,Jie Deng,Xin Zhou,Shenli Jia,Zhonghao Qian,Xiaolong Huang,Zongqian Shi
DOI: https://doi.org/10.1109/tps.2015.2389844
IF: 1.368
2015-01-01
IEEE Transactions on Plasma Science
Abstract:In this paper, high-current vacuum arc (VA) breaking experiments in vacuum interrupters were conducted using two kinds of high-capacity (larger diameter) axial magnetic field (AMF) electrodes with contact gap distance changing from 10 to 40 mm. Triggering arc mode and fixed gap distance were adopted. Experimental results showed that during the initial diffusion stage, the arc voltage of high-current VA got a peak value. The change in high-current VA appearance would also affect the curve of arc voltage. With the increase of contact gap distance, the voltage of high-current VA increased and the VA near the anode appeared contracted, and its shape was changed from cylinder to cone. In the shorter gap distance, for cup electrodes, the plasma jets mix with each other and the arc column appears like a bright cone, whereas for coil electrodes, the plasma jets are clear and the column appears like a cylinder, and the transfer of arc appearance affects arc voltage distribution. Moreover, arc twist and rotation often occur under longer gap and higher current, which is due to the larger radial magnetic field component generated by AMF coils, and arc voltage appeared high-frequency and high-amplitude noise, and ultimately resulted in the distortion of the arc current in the current experimental conditions (lower charging voltage of capacitor).