Abstract:To evaluate the behaviour of a single timber-concrete composite (TCC) T-beam, a simplified 2D finite element (FE) model in Abaqus is developed and validated using experimental tests and the Gamma method given in Annex B of EN 1995–1-1. The shear connection used in the beam consist of perfobond connectors, which are adhesively bonded to the timber beam. In the developed model, beam and shell finite elements have been used to simulate/reproduce the timber beam and the concrete slab, respectively. These have then been connected using connector elements which incorporate the mechanical behaviour of the tested shear connections, obtained in a previous research. After the successful validation of the FE model, this is used to further analyse different parameters such as: i) different number of connections (varying from 8 to 20), ii) different types of loading (point load, distributed load and line load), iii) different concrete slab widths and iv) connection models with elastic perfectly plastic behaviour applied to TCC T-beam and a 5 m by 5 m floor system. The results of the conducted study provide an in-depth understanding of the effect and impact of the investigated parameters which can support a future optimisation of the structural solution. Moreover, the results show that the use of a simplified 2D model can support designers to overcome the limitations of analytical approaches, such as the Gamma method, to analyse large spacing and to take benefit of bidirectional effects (load sharing) if analysed as a whole instead of a single T-beam.

Experimental Tests on a Dowel-Type Timber Connection and Validation of Numerical Models

Timber shear walls: numerical assessment of the equivalent viscous damping

Dissipation in Sheathing-to-framing Connections of Light-Frame Timber Shear Walls under Seismic Loads

Mechanical behaviour of connections between wood framed shear walls and foundations under monotonic and cyclic load

Numerical and Experimental Analysis of the Load-Carrying Capacity of a Timber Semi-Rigid Dowel-Type Connection

Numerical and Experimental Analysis of the Rotational Stiffness of a Timber Semi-Rigid Dowel-Type Connection

Experimental, Finite Element and Analytical Characterization of Hysteretic Response of Ductile Connections with Nailed Angle Brackets for Mass Timber Structures

Numerical modelling of the structural response of a novel hybrid densified wood filled-aluminium tube dowel for structural timber connections

Performance of Beam-Column Connections with Mass Ply Lam and Steel Dowels under Cyclic Loads

Rotational Stiffness and Carrying Capacity of Timber Frame Corners with Dowel Type Connections

In-plane testing and hysteretic modeling of steel-spline cross-laminated timber diaphragm connection with self-tapping screws

Three-dimensional numerical analyses of load-bearing behavior and failure of multiple double-shear dowel-type connections in timber engineering

Behavior of dowel-type timber connections under cyclic loading

Lateral performances of traditional wooden frame with loose penetrated mortise-tenon connection and column foot models

Analytical Model for Non-linear Relationships of Dowel-Type Timber Connections Exposed to Fire

A Dynamic-Based Method for the Assessment of Connection Systems of Timber Composite Structures

Experimental Investigation on Self-Centering Steel-Timber Hybrid Beam-Column Connections

Efficiency of timber-concrete composite floors with discrete perfobond connections: A numerical study

Lateral Performance of Mortise-Tenon Jointed Traditional Timber Frames with Wood Panel Infill

Lateral Performance’s Experimental Study on Through Type Timber Frame