Abstract:The conceptual design and engineering of an integrated catalytic reactor requires a thorough understanding of the prevailing mechanisms and phenomena to ensure a safe operation while achieving desirable efficiency and product yields. The necessity and importance of these requirements are demonstrated in this investigation in the case of novel membrane-assisted reactors tailored for CO2 hydrogenation. Firstly, a carbon molecular sieve membrane was developed for simultaneous separation of CO2 from a hot post-combustion CO2-rich stream, followed by directing it along a packed-bed of hybrid CuO-ZnO/ZSM5 catalysts to react with hydrogen and produce DiMethyl Ether (DME). The generated water is removed from the catalytic bed by permeation through the membrane which enables reaction equilibrium shift towards more CO2-conversion. Extra process intensification was achieved using a membrane-assisted reactive distillation reactor, where similarly several such parallel membranes were erected inside a catalytic bed to form a reactive-distillation column. This provides the opportunity for a synchronized separation of CO2 and water by a membrane, mixing the educts (i.e., hydrogen and CO2) and controlling the reaction along the catalytic bed while distilling the products (i.e., methanol, water and DME) through the catalyst loaded column. The hybrid catalyst and carbon molecular sieve membrane were developed using the synthesis methods and proved experimentally to be among the most efficient compared to the state-of-the-art. In this context, selective permeation of the membrane and selective catalytic conversion of hybrid catalysts under the targeted operating temperature range of 200–260 °C and 10–20 bar pressure were studied. For the membrane, the obtained high flux of selective CO2-permeation was beyond the Robeson upper bound. Moreover, in the hybrid catalytic structure, a combined methanol and DME yield of 15% was secured. Detailed results of catalyst and membrane synthesis and characterization along with catalyst test and membrane permeation tests are reported in this paper. The performance of various configurations of integrated catalytic and separation systems was studied through an experimentally supported simulation along with the systematic analysis of the conceptual design and operation of such reactive distillation. Focusing on the subnano-/micro-meter scale, the performance of sequential reactions while considering the interaction of the involved catalytic materials on the overall performance of the hybrid catalyst structure was studied. On the same scale, the mechanism of separation through membrane pores was analyzed. Moreover, looking at the micro-/milli-meter scale in the vicinity of the catalyst and membrane, the impacts of equilibrium shift and the in-situ separation of CO2 and steam were analyzed, respectively. Finally, at the macro-scale separation of components, the impacts of established temperature, pressure and concentration profiles along the reactive distillation column were analyzed. The desired characteristics of the integrated membrane reactor at different scales could be identified in this manner.

Membrane Based Gas–Liquid Dispersion Integrated in Fixed-Bed Reactor: A Highly Efficient Technology for Heterogeneous Catalysis

Research on the Design and Application of Efficient Catalysts Based on Interfacial Chemistry: Molecular Catalysts in Gas-Liquid Mixed Systems

Scalable Thin-Layer Membrane Reactor for Heterogeneous and Homogeneous Catalytic Gas–liquid Reactions

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

Microwave Fixed-Bed Reactor for Gas-Phase Glycerol Dehydration: Experimental and Simulation Studies

Multiscale Analysis of Membrane-Assisted Integrated Reactors for CO2 Hydrogenation to Dimethyl Ether

Process Intensification Of Catalytic Hydrogenation Of Ethylanthraquinone With Gas-Liquid Microdispersion

Multi-channel ceramic catalytic membrane microreactors for highly efficient heterogeneous catalysis

Hydrogen production and geometry optimization of ethanol steam reforming combining water gas shift reaction in a crossflow membrane tube reactor

Coupling water splitting and partial oxidation of methane (POM) in Ag modified La0.8Ca0.2Fe0.94O3-δ hollow fiber membrane reactors for co-production of H2 and syngas

The Enhancement of Reaction Yield Through the Use of High Temperature Membrane Reactors

Catalytic mixed conducting ceramic membrane reactors for methane conversion

Selective Removal of H2S over CO2 in a Membrane Gas–liquid Microdisperison Microreactor

Stacked Catalytic Membrane Microreactor for Nitrobenzene Hydrogenation

On-demand Continuous H2 Release by Methanol Dehydrogenation and Reforming Via Photocatalysis in a Membrane Reactor

Highly efficient and stable hydrogen permeable membrane reactor for propane dehydrogenation

Catalytic Membrane Reactors for Partial Oxidation Using Perovskite Hollow Fiber Membranes and for Partial Hydrogenation Using a Catalytic Membrane Contactor

Ion–Conducting Ceramic Membrane Reactors for the Conversion of Chemicals

Microstructured gas-liquid-(solid) interfaces: A platform for sustainable synthesis of commodity chemicals

Optimizing reactor structure to increase MgH 2 dispersion and improve hydrolysis performance

Preparation and catalytic performance of active metal sintered membrane reactor anchored with Pt atoms