Abstract:Herein, a novel in-plane dual-axis micro-electro-mechanical system piezoresistive accelerometer was proposed based on theoretical and simulation analyses. Its self-support piezoresistive beam (SPB) possessed the features of force amplification and axial deformation to obtain high sensitivity. To clarify the influence of structural dimensions on the performance of the accelerometer and the pure axial-deformation condition of the SPB, a theoretical model was established to analyze mechanical behavior. The theoretical results were in well accordance with the simulation ones, displaying a maximum relative error of less than 10%. The theoretical and simulation results suggested that the accelerometer with thin and long support/hinge beams possesses a higher sensitivity but a lower frequency. However, the sensitivity and natural frequency increased simultaneously before the distance between SPB and support beam $D$ reached a certain value. The simulated longitudinal stress of SPB achieved the average value of 32.473 MPa, and the first-order natural frequency was nearly 13.6 kHz. Furthermore, the fabricated accelerometer was tested in a simple packaging case. The experimental results demonstrated that the proposed accelerometer had a measuring sensitivity of 0.198 mV/g/V with a maximum non-linearity of 1.00% FS and a resonant frequency of 12.93 kHz. The cross sensitivities were 11.93 and $15.97~\mu \text{V}$ /g/5V in the $y$ and $z$ axes, respectively, which were 1.21% and 1.61% of the prime-axis sensitivity. The zero offset with varying temperatures was 0.00296%/°C, and the zero drift in the long-term static stability test was 0.02 mV. All the results above revealed the promising application potential of the proposed accelerometer in vibration detection in the high-speed rotating spindle of machine tools. [2022-0057]

An improved structural design for accelerometers based on slotted eight-beam structure

A New Type of MEMS Accelerometer with Up-Tuning Structure

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

An improved structural design for accelerometers based on cantilever beam-mass structure

Piezoresistive Slot-Cantilever Type Accelerometer Inspired from Spider'S Slit Sensilla

High Performance Piezoresistive Accelerometer Based on the Slot Etching in the EB(eight-beam) Structure

A piezoresistive micro-accelerometer with high frequency response and low transverse effect

The double-bridge beam structure with slots for microaccelerometer

Monolithically Integrated Triaxial High-Performance Micro Accelerometers with Position-Independent Pure Axial Stressed Piezoresistive Beams

A Novel Piezoresistive Accelerometer with SPBs to Improve the Tradeoff Between the Sensitivity and the Resonant Frequency

Design of a Beam-Membrane Piezoresistive Accelerometer Based on MEMS Technology

Analysis and Design of a Novel Piezoresistive Accelerometer with Axially Stressed Self-Supporting Sensing Beams

A High-g Triaxial Piezoresistive Accelerometer with Sensing Beams in Pure Axial Deformation.

Development of a High-Performance Microaccelerometer With Position Independent Pure-Axial Stressed Piezoresistive Beams

Modeling and Characterization of a Novel In-Plane Dual-Axis MEMS Accelerometer Based on Self-Support Piezoresistive Beam

A High-Performance Multi-Beam Microaccelerometer for Vibration Monitoring in Intelligent Manufacturing Equipment

High Sensitivity MEMS Accelerometer Using PZT-Based Four L-Shaped Beam Structure

Incorporation of the Stress Concentration Slots into the Flexures for A High-Performance Microaccelerometer

A Two-Axis MEMS Piezoresistive In-Plane Accelerometer with Pure Axially Deformed Microbeams

Design And Simulation Of A Novel Piezoresistive Accelerometer For High Accuracy And Overload Ability

Equal-strength Beam Design of Acoustic Wave Accelerometers