Fast Cooling Pulsed Magnet Using Distributed Mini-gaps

Yiliang Lv,Dong Xia,Tao Peng,Houxiu Xiao,Quanliang Cao,Liang Li

DOI: https://doi.org/10.1109/tasc.2017.2781729

IF: 1.9489

2017-01-01

IEEE Transactions on Applied Superconductivity

Abstract:Repetition rate enhancement of the pulsed high-field magnets has significant impact on their applications. The cooling efficiency improvement and repetition rate enhancement of the pulsed magnets may be best achieved by adding liquid nitrogen cooling gaps to the pulsed magnets. This study shows that minimizing the radial thickness of the cooling gaps reduces the effect of the cooling gaps on the maximum field of the magnet. However, since the flow boiling process in the mini-gaps, with the hydraulic diameter of smaller than 3 mm, is complicated. An experimental model for 1 mm mini-gaps is built to characterize the heat transfer. Experimental results indicate that the efficiency of the heat transfer of an annular 1 mm mini-gap, under the forced flow condition, is equivalent to the one of the natural convection, annular cooling gap with 3-5 mm in the present magnet. The single cooling gap of the present pulsed magnet may be subdivided into 3-5 distributed mini-gaps. As a result, the cooling efficiency will be significantly improved by increasing the number of the cooling gaps. We propose a technical scheme of a fast cooling pulsed magnet system including the cryogenic and the control system.