Abstract:Internal insulation defects of oil-immersed transformers are common because of flaws in both manufacturing and transportation process. Partial discharge (PD) activity caused by insulation defects may occur at rated voltage condition, leading to deterioration of material, which results in breakdown of insulation. Feature parameters of PD are closely related to the performance of insulation materials. Therefore, the parameter changes under long-term AC voltage due to the decrease in electrical properties of material. It is effective to acquire insulation condition of materials by analyzing changes in the parameters of PD. The present thesis studied partial discharge in insulation defect of oil-paper insulation under long-term AC voltage. The PD tests were performed on specimens of 1 mm thickness which was placed between the needle-to-plane electrodes in an oil cup. The specimen was impregnated with oil in vacuum with treatment of hot air drying in order to remove moisture. Feature parameters of PD, such as phase-resolved partial discharge analysis and equivalent time-frequency, were recorded during the test process. When the feature parameters of PD are significantly changed, some specimens were removed. The surface appearance of these specimens was studied by scanning electron microscope. The measurement provides a theoretical basis for the analysis of the changes in the feature parameters of PD, which is helpful for the estimation of remaining life of insulation material. Test results indicate that as the AC voltage applied, cellulose depolymerisation continuously happened at the surface of paper. Cellulose in some area is carbonized by PD, and particulates are created. As the PD developed, the discharge magnitude is increased at the beginning while decreased rapidly just before breakdown of the paper, and the distribution phase of discharges is almost unchanged.

Influence Of Fiber Impurities On Dc Partial Discharge Process In Oil-Pressboard Insulation

Effect of Cellulose Impurities on Partial Discharges in Oil-Pressboard Insulation under DC Voltage

Influence of Partial Discharge on Oil-Impregnated Insulation Pressboard Surface

Study on Micro Bridge Impurities in Oil-Paper Insulation at DC Voltage: Their Generation, Growth and Interaction with Partial Discharge

Degradation Characteristics of Oil-Immersed Pressboard Samples Induced by Partial Discharges under DC Voltage

Development of partial discharge in oil-impregnated insulation and its effect

Partial Discharge Development in Needle-Plane Configuration of Oil-Paper Insulation under AC Voltage

Effects of DC Prestressing on Partial Discharge in Oil-Impregnated Pressboard Insulation

PD Pulse Waveform and Charge Distribution in Oil-Pressboard Insulation with Needle-Plate Model at Positive DC Voltage: Their Characteristics and Relationship

The Influence of Temperature on Partial Discharges and Wormhole Effect of Oil-Paper Insulation under DC Voltage

Partial Discharge Characteristics over Differently Aged Oil/pressboard Interfaces

Study on partial discharge and charge accumulation characteristics of oil‐pressboard insulation under DC superimposed harmonic voltage

Effect of Pre-applied DC Voltage on Discharge Process of Insulating Pressboard

Partial Discharge Characteristics in Pre-Breakdown Processes of Oil-Pressboard Insulation with Needle-Plate Defect under AC-DC Combined Voltage

Evolution of Partial Discharge of Oil-Paper Insulation under Long-Term AC Voltage

Partial Discharge Characteristics of Uniform Gap in Oil-Impregnated Paper Insulation under Switching Impulse Voltage

Partial Discharge Suppression of the Oil-impregnated Paper by Depositing PTFE Thin Film via Magnetron Sputtering

Pd Characteristics of Oil-Pressboard Insulation under Ac and Dc Mixed Voltage

Influences of moisture content on surface partial discharge behaviors of oil-impregnated paper insulation under pulsating DC voltage

Measurement and Simulation of Partial Discharge in Oil-Paper Insulation under the Combined AC–DC Voltage

Partial discharge features and parameters characterization under typical defect geometries in oil-paper insulation: Considering the aging states