Abstract:Internal insulation defects of oil-immersed transformers are common because of flaws in both manufacturing and transportation process. Partial discharge (PD) activity caused by insulation defects may occur at rated voltage condition, leading to deterioration of material, which results in breakdown of insulation. Feature parameters of PD are closely related to the performance of insulation materials. Therefore, the parameter changes under long-term AC voltage due to the decrease in electrical properties of material. It is effective to acquire insulation condition of materials by analyzing changes in the parameters of PD. The present thesis studied partial discharge in insulation defect of oil-paper insulation under long-term AC voltage. The PD tests were performed on specimens of 1 mm thickness which was placed between the needle-to-plane electrodes in an oil cup. The specimen was impregnated with oil in vacuum with treatment of hot air drying in order to remove moisture. Feature parameters of PD, such as phase-resolved partial discharge analysis and equivalent time-frequency, were recorded during the test process. When the feature parameters of PD are significantly changed, some specimens were removed. The surface appearance of these specimens was studied by scanning electron microscope. The measurement provides a theoretical basis for the analysis of the changes in the feature parameters of PD, which is helpful for the estimation of remaining life of insulation material. Test results indicate that as the AC voltage applied, cellulose depolymerisation continuously happened at the surface of paper. Cellulose in some area is carbonized by PD, and particulates are created. As the PD developed, the discharge magnitude is increased at the beginning while decreased rapidly just before breakdown of the paper, and the distribution phase of discharges is almost unchanged.

Influences of moisture content on surface partial discharge behaviors of oil-impregnated paper insulation under pulsating DC voltage

Effect of Oil-paper Damped State on Characteristics of Surface Discharge Process under AC-DC Combined Voltage

Measurement and Simulation of Partial Discharge in Oil-Paper Insulation under the Combined AC–DC Voltage

Partial Discharge Characteristics in Oil-Paper Insulation under Combined Ac-Dc Voltage

Partial Discharge Characteristics over Differently Aged Oil/pressboard Interfaces

Evolution of Partial Discharge of Oil-Paper Insulation under Long-Term AC Voltage

PD Detection and Analysis of Oil-Pressboard Insulation under Pulsed DC Voltage

Surface partial discharge characteristics of oil-paper insulation under combined AC-DC voltage

Pd Characteristics of Oil-Pressboard Insulation under Ac and Dc Mixed Voltage

Partial Discharge Characteristics of Oil-Paper Insulation for On-Board Traction Transformers under Superposed Inter-Harmonic AC Voltages

Partial Discharge of Needle-Plane Defect in Oil-Paper Insulation under AC and DC Combined Voltages: Developing Processes and Characteristics

Partial Discharge Patterns of Oil-Paper Insulation under AC Voltage Superimposed Harmonics

Research on the Failure Process of Oil Paper Insulation of Surface Partial Discharge under Fluctuating DC voltage

Influence of temperature to developing processes of surface discharges in oil-paper insulation

The Effect Of Moisture And Temperature On The Oil-Immersed-Paper Used In Ehv Converter Transformer

Partial Discharge Simulation of Air Gap Defects in Oil-Paper Insulation Paperboard of Converter Transformer under Different Ratios of AC–DC Combined Voltage

The Influence of Temperature on Partial Discharges and Wormhole Effect of Oil-Paper Insulation under DC Voltage

Partial Discharge Characteristics of Uniform Gap in Oil-Impregnated Paper Insulation under Switching Impulse Voltage

Partial Discharge Statistical Characteristics of Oil-Paper Insulation under High Frequency Stress

Surface Degradation of Oil-Immersed Nomex Paper Caused by Partial Discharge of High-Frequency Voltage

Characteristics of Partial Discharge in Oil-paper Insulated Needle Plate Electrode Model Under Composite AC-DC Voltage