Abstract:The most common technology for the manufacture of aluminum parts and blanks is casting in a chill mold. To determine ways to improve casting technology, it is necessary to analyze the possibility of changing the parameters that affect the reduction of production costs (reduction of energy consumption, material consumption, increase productivity) and improve the quality of casting. The thermal regime of the metal form determines the productivity of the process, the duration of curing of the casting, its quality, durability of the chill mold. The analysis of the work of the chill mold for the manufacture of castings Pump Housing showed that when the forms are filled, the most heated new portions of metal meet on their way to the central core. That is, when pouring the mold, the central core is heated the most, especially in the lower part. This circumstance hinders the process of directed curing and can lead to shrinkage defects. In addition, the higher the temperature of the mold, the slower the casting will crystallize and the worse its structure and mechanical properties will be. Based on the analysis of structures and methods of cooling molds, the method of controlled cooling of the central core by air is substantiated. A new design of the core has been developed, which provides adjustable air cooling of the chill mold by connecting the central core through a valve to the pneumatic system of the shop. 3D-models of details and assembly drawings of the central core of a new design are developed. A computer study of the air flow in the core channels in SolidWorks Flow Simulation was performed. The results of parametric modeling of air flow in the channels of the Central core showed the maximum air flow rate during cooling 0.371 kg / s, the heat content of air when cooled 25081 J / s. Evaluation of the cooling efficiency of the developed chill mold design showed that when using air cooling of the central core with cooling air at its maximum consumption, 41% of heat is removed. Thus, the developed design of the cooled central core allows to increase the productivity of the casting process, improve the quality of casting by improving the structure and mechanical properties of the casting, as well as increase the life of the chill mold. But the obtained research results are of a recommendatory nature and require practical verification in the production environment. In addition, the simulation did not take into account the change in core temperature due to its heat exchange with the melt. Given all this, there is a need for further study of the effect of regulated air cooling on the thermal regime of the chill mold.

Application of Forced Air Cooling in the Sand Core of Large Steel Casting

Simulation Analysis of Thermal Stress During Casting Process of Large-Sized Alloy Steel Ingot

Cooling Control for Castings by Adopting Skeletal Sand Mold Design

Determination and Application of Thermophysical Properties of Heavy Steel Casting for Solidification Simulation

Intensive Riser Cooling of Castings after Solidification

Improving the Productivity of the Casting Process by Regulating the Thermal Regime of the Chill Mold on a Basis of Computer Investigation of the Air Flow in the Channels of the Casting Core

Controlled Cooling of an Aluminum Alloy Casting Based on 3D Printed Rib Reinforced Shell Mold

Chimney Structure of Hollow Sand Mold for Casting Solidification

Intensive riser cooling of a turbine blade steel casting after solidification

Modeling and Simulation of the Casting Process with Skeletal Sand Mold

Laboratory Experimental Setup And Research On Heat Transfer Characteristics During Secondary Cooling In Continuous Casting

Impact of Temperature of Cast Iron Chills on Tensile Properties in the Aluminum Precisions Sand Casting Process

Numerical Simulation of Solidification and Macrosegregation in Water Cooled Heavy Steel Ingot

The comparison of intensive riser cooling of castings after solidification in three classic metals

Intensive Cooling Method of Slab Just After Exit of Mold by High Speed Water Film

Numerical modeling and simulation of water cooling-controlled solidification for aluminum alloy investment casting

Insulation Effect of Air Cavity in Sand Mold Using 3D Printing Technology

Investigation on Heat Transfer in Molds with Different Water-Cooling Structures Under Billet High-Speed Continuous Casting

Domination and Effect of Multi-parameters in Direct Chill Casting based on Establishment of Thermo Model by Numerical Simulation and Experiment

Application of Modeling and Simulation of Thermal Stress in Solidification Process of a Heavy Steel Casting

Quenched Depth of 20mnsi Steel Bar in the Process of Controlled-Cooling